Coal solubilization under aerobic conditions results in oxygenated coal product which, in turn, makes the coal poorer fuel than the starting material. A novel approach has been made in this project is to remove oxygen from coal by reductive decarboxylation. In Wyodak subbituminous coal the major oxygen functionality is carboxylic groups which exist predominantly as carboxylate anions strongly chelating metal cations like Ca{sup 2+} and forming strong macromolecular crosslinks which contribute in large measure to network polymer structure. Removal of the carboxylic groups at ambient temperature by anaerobic organisms would unravel the macromoleculer network, resulting in smaller coal macromolecules with increased H/C ratio which has better fuel value and better processing prospects. These studies described here sought to find biological methods to remove carboxylic functionalities from low rank coals under ambient conditions and to assess the properties of these modified coals towards coal liquefaction. Efforts were made to establish anaerobic microbial consortia having decarboxylating ability, decarboxylate coal with the adapted microbial consortia, isolate the organisms, and characterize the biotreated coal products. Production of CO{sup 2} was used as the primary indicator for possible coal decarboxylation.

Syngas is known to contain approximately 1 percent H[sub 2]S, along with CO[sub 2], C0[sub 2], H[sub 2] and CH[sub 4]. Similarly, the syngas may become contaminated with oxygen, particularly during reactor start-up and during maintenance. Previous studies with the water-gas shift bacterium Rhodospirillum rubrum have shown that the bacterium is tolerant of small quantities of oxygen, but the effects of oxygen on CO-consumption are unknown. Similarly, R. rubrum is known to be tolerant of H[sub 2]S, with high concentrations of H[sub 2]S negatively affecting CO-uptake. Batch experiments were thus carried out to determine the effects of H[sub 2]S and O[sub 2] on CO-uptake by R. rubrum. The results of these experiments were quantified by using Monod equations modified by adding terms for CO, H[sub 2]S and O[sub 2] inhibition. The techniques used in determining kinetic expressions previously shown for other gas-phase substrate bacterial systems including R. rubrum were utilized.

Syngas is known to contain approximately 1 percent H{sub 2}S, along with CO{sub 2}, C0{sub 2}, H{sub 2} and CH{sub 4}. Similarly, the syngas may become contaminated with oxygen, particularly during reactor start-up and during maintenance. Previous studies with the water-gas shift bacterium Rhodospirillum rubrum have shown that the bacterium is tolerant of small quantities of oxygen, but the effects of oxygen on CO-consumption are unknown. Similarly, R. rubrum is known to be tolerant of H{sub 2}S, with high concentrations of H{sub 2}S negatively affecting CO-uptake. Batch experiments were thus carried out to determine the effects of H{sub 2}S and O{sub 2} on CO-uptake by R. rubrum. The results of these experiments were quantified by using Monod equations modified by adding terms for CO, H{sub 2}S and O{sub 2} inhibition. The techniques used in determining kinetic expressions previously shown for other gas-phase substrate bacterial systems including R. rubrum were utilized.

The osteogenic sarcoma is the dominant life-threatening pathology in lifespan studies of beagles exposed to alpha-emitting bone-seeking radionuclides. It was deduced from these studies that certain skeletal sites are more prone to develop tumors. This project sought to determine the bone cells at risk and their cell-specific radiation dose. The cell-specific radiation dose values are related to loss and high Ra-226 and Pu-239 induced osteogenic sarcoma sites, to test different dose response hypothesis and predict the extent of effects in humans.

The osteogenic sarcoma is the dominant life-threatening pathology in lifespan studies of beagles exposed to alpha-emitting bone-seeking radionuclides. It was deduced from these studies that certain skeletal sites are more prone to develop tumors. This project sought to determine the bone cells at risk and their cell-specific radiation dose. The cell-specific radiation dose values are related to loss and high Ra-226 and Pu-239 induced osteogenic sarcoma sites, to test different dose response hypothesis and predict the extent of effects in humans.

Results are reported in two areas: (1) understanding the mechanism of superplasticity in those that show unusual resistance to intergranular cavitation, and (2) understanding the growth of heteroepitaxial films of oxides by CVD (NiO, TiO{sub 2}).

Preparation, characterization, and reactivity of ({eta}{sup 2}- alkyne)(meso-tetratolylpoprphrinato)titanium(II) complexes are described, along with inetermetal oxygen atom transfer reactions involving Ti(IV) and Ti(III) porphyrin complexes. The {eta}{sup 2}- alkyne complexes are prepared by reaction of (TTP)TiCl{sub 2} with LiAlH{sub 4} in presence of alkyne. Structure of (OEP)Ti({eta}{sup 2}-Ph-C{triple_bond}C-Ph) (OEP=octaethylporphryin) was determined by XRD. The compounds undergo simple substitution to displace the alkyne and produce doubly substituted complexes. Structure of (TTP)Ti(4-picoline){sub 2} was also determined by XRD. Reaction of (TTP)Ti{double_bond}O with (OEP)Ti-Cl yields intermetal O/Cl exchange, which is a one-electron redox process mediated by O atom transfer. Also a zero-electron redox process mediated by atom transfer is observed when (TTP)TiCl{sub 2} is reacted with (OEP)Ti{double_bond}O.

Progress is reported on research pertaining to insulated building blocks. Areas covered include coursing, the development of a stuffing machine, block fabrication, designs for earthquake testing, and sound tests.

In order to study diffusion in any region of phase space containing nested closed curves we choose action-angle variables, {gamma}, J. the action J labels each closed phase curve and is equal to its area divided by 2{pi}. We can introduce rectangular variables Q,P by the equations Q=(2J){sup 1/2}sin{gamma}, P=(2J){sup 1/2}cos{gamma}, where the angle variable {gamma} is measured clockwise from the P-axis. The phase curves are circles in the Q,P plane with radius (2J){sup 1/2}. We assume that the motion consists of a Hamiltonian motion along a curve of fixed J (in the original coordinate system and in the system Q,P) plus a diffusion and a damping which can change the value of J. Now consider a system of particles described by a density {rho}(J,t), so that the number of particles between the curves J and J+dJ is dN={rho}(J,t)dJ. These cN particles are distributed uniformly in the phase space between the curves J and J+dJ.

With statistical analysis of global data from one, two and four stellarators, it is possible to draw limited conclusions whether Gyro- Bohm or Bohm scaling prevails. Either scaling may be favored, depending on whether corrections are included for possible {Beta} and v{sub *} corrections and whether all data are taken, or selected cases with low collisionality, or low net toroidal current, or with ECH heating applied, and so on. Monte Carlo-like simulations are used to test reliability of inferences about power-law scaling exponents made from data having substantial statistical variance and collinearity of control parameters. These show that for reliable conclusions, statistical studies should be augmented; more directed experimental studies are needed, with well controlled discharges and radially resolved data - such as those already begun on ATF and W7-AS.

In the Environmental Release Prevention and Control Plan (ERP and CP), WSRC made a commitment to conduct the following follow-up activities and actions: (1) Complete the action items developed in response to the findings and recommendation of the Environmental Release Prevention Taskteam (WSRC-RP-92-356). (2) Complete all batch and continuous release procedure revisions to incorporate the attributes that WSRC senior management required of each procedure. (3) DOE-SR Assistance Managers and WSRC counterparts to reach consensus and closure on the identified engineered solutions documented in the ERP and CP, develop and drive implementation of facility changes per the agreements. (4) Continue to analyze releases and monitor performance in accordance with the ERP and CP, and utilize the ALARA Release Guides Committee to drive improvements. (5) Conduct annual re-evaluations of the cost benefit analyses of the identified engineered solutions, and identify new options and alternatives for each outfall in response to site mission and facility changes. This report documents the efforts that have been completed over the past year in response to these commitments.

This manual covers the following hardware: Allen-Bradley 6008 -- SV VMEbus I/O scanner; Allen-Bradley universal I/O chassis 1771-A1B, -A2B, -A3B, and -A4B; Allen-Bradley power supply module 1771-P4S; Allen-Bradley 1771-ASB remote I/O adapter module; Allen-Bradley 1771-IFE analog input module; Allen-Bradley 1771-OFE analog output module; Allen-Bradley 1771-IG(D) TTL input module; Allen-Bradley 1771-OG(d) TTL output; Allen-Bradley 1771-IQ DC selectable input module; Allen-Bradley 1771-OW contact output module; Allen-Bradley 1771-IBD DC (10--30V) input module; Allen-Bradley 1771-OBD DC (10--60V) output module; Allen-Bradley 1771-IXE thermocouple/millivolt input module; and the Allen-Bradley 2705 RediPANEL push button module.

These lecture notes review the LDA-KKR-CPA method for treating the electronic structure and energetics of random alloys and the MF-CF and GPM theories of ordering and phase stability built on the LDA- KKR-CPA description of the disordered phase. Section 2 lays out the basic LDA-KKR-CPA theory of random alloys and some applications. Section 3 reviews the progress made in understanding specific ordering phenomena in binary solid solutions base on the MF-CF and GPM theories of ordering and phase stability. Examples are Fermi surface nesting, band filling, off diagonal randomness, charge transfer, size difference or local strain fluctuations, magnetic effects; in each case, an attempt is made to link the ordering and the underlying electronic structure of the disordered phase. Section 4 reviews calculations of electronic structure of {beta}-phase Ni{sub c}Al{sub 1-c} alloys using a version of the LDA-KKR-CPA codes generalized to complex lattices.

In the first phase of construction, sixteen insertion device beamline front ends and sixteen bending magnet beamline front ends will be built by 1995 for the Advanced Photon Source (APS). Designs for these front ends have been completed. In this paper, the particular designs and specifications as well as the optical and bremsstrahlung ray-tracing analysis for the APS front ends are presented.

The generalized perturbation method, commonly used in connection with the band energy contribution to the energy of a solid to approximate the total energy of an ordered configuration of an alloy, is reformulated with respect to total energy. The connection of the results derived here to those obtained based on the band energy is pointed out, and possible applications of the method is discussed.

This report includes the results of the Human Factors evaluation of the local control stations (LCS) 254 and 255 performed by Savannah River Technology Center (SRTC) Human Factors. Recommendations are included in order that the panel designs will be upgraded to comply with human engineering design guidelines. Figures 1 and 2 are included as examples of recommended changes. Also, consideration was given to including the proposed engineering changes which are currently on-going for LCS 255. Appendix A identifies the human engineering requirements from NUREG-0700 which were used in the evaluation process, and the areas of the design which do not comply with the guidelines. Those areas of the panel design which fail to comply with the human engineering guidelines are label location, label content, location aids, panel layout, and control display integration. Each of these design deficiencies and proposed corrections are described in this report.

Energy-dependent photoelectron diffraction (EDPD) has been used to determine the surface structure of a surface alloy. Direct imaging has been achieved by Fourier transformation of experimental energy-dependent photoelectron diffraction data. This holographic method, based upon the intersection of contour arcs associated with each measurement direction, can provide vectorial atomic positions with atomic resolution. Experimental analysis is supported by Fourier transformation of simulations from multiple scattering calculations. The surface geometry of c(2x2) Au/Cu(001) has been imaged in an elementally-specific manner, with clear, non-model-dependent discrimination of the surface alloy over the overlayer structure.

Hazardous debris includes objects contaminated with hazardous waste. Examples of debris include tree stumps, timbers, boulders, tanks, piping, crushed drums, personal protective clothing, etc. Most of the hazardous debris encountered comes from Superfund sites and other facility remediation, although generators and treaters of hazardous waste also generate hazardous debris. Major problems associated with disposal of debris includes: Inappropriateness of many waste treatments to debris; Difficulties in obtaining representative samples; Costs associated with applying waste specific treatments to debris; Subtitle C landfill space was being used for many low hazard debris types. These factors brought about the need for debris treatment technologies and regulations that addressed these issues. The goal of such regulation was to provide treatment to destroy or remove the contamination if possible and, if this is achieved, to dispose of the cleaned debris as a nonhazardous waste. EPA has accomplished this goal through promulgation of the Hazardous Debris Rule, August 18, 1992.

A vapor-phase, reagent-based, fiber optic trichloroethylene (TCE) sensor developed by Lawrence Livermore National Laboratory (LLNL) was demonstrated at the Savannah River Site (SRS) in two configurations. The first incorporated the sensor into a down-well instrument bounded by two inflatable packers capable of sealing an area for discrete depth analysis. The second involved an integration of the sensor into the probe tip of the Army Corps of Engineers Waterways Experiment Station (WES) cone penetrometry system. Discrete depth measurements of vapor-phase concentrations of TCE in the vadose zone were successfully made using both configurations. These measurements demonstrate the first successful in situ sensing (as opposed to sampling) of TCE at a field site.

A project for the US Department of Energy, entitled Incorporation of an organic acid representation into MAGIC (Model of Acidification of Groundwater in Catchments) and Testing of the Revised Model UsingIndependent Data Sources'' was initiated by E S Environmental Chemistry, Inc. in March, 1992. Major components of the project include: improving the MAGIC model by incorporating a rigorous organic acid representation, based on empirical data and geochemical considerations, and testing the revised model using data from paleolimnological hindcasts of preindustrial chemistry for 33 Adirondack Mountain lakes, and the results of whole-catchment artificial acidification projects in Maine and Norway. The ongoing research in this project involves development of an organic acid representation to be incorporated into the MAGIC modeland testing of the improved model using three independent data sources. The research during Year 1 has included conducting two workshops to agree on an approach for the organic acid modeling, developing the organic subroutine and incorporating it into MAGIC (Task 1), conducing MAGIC hindcasts for Adirondack lakes and comparing the results with paleolimnological reconstructions (Task 2), and conducting site visits to the manipulation project sites in Maine and Norway. The purpose of this report is to provide a summary of the work …

A project for the US Department of Energy, entitled ``Incorporation of an organic acid representation into MAGIC (Model of Acidification of Groundwater in Catchments) and Testing of the Revised Model UsingIndependent Data Sources`` was initiated by E&S Environmental Chemistry, Inc. in March, 1992. Major components of the project include: improving the MAGIC model by incorporating a rigorous organic acid representation, based on empirical data and geochemical considerations, and testing the revised model using data from paleolimnological hindcasts of preindustrial chemistry for 33 Adirondack Mountain lakes, and the results of whole-catchment artificial acidification projects in Maine and Norway. The ongoing research in this project involves development of an organic acid representation to be incorporated into the MAGIC modeland testing of the improved model using three independent data sources. The research during Year 1 has included conducting two workshops to agree on an approach for the organic acid modeling, developing the organic subroutine and incorporating it into MAGIC (Task 1), conducing MAGIC hindcasts for Adirondack lakes and comparing the results with paleolimnological reconstructions (Task 2), and conducting site visits to the manipulation project sites in Maine and Norway. The purpose of this report is to provide a summary of the work that …

None

The SCC radiation field is higher than that encountered by previous hadron collider detectors. In particular, the electromagnetic (EM) calorimeter compartment sees the highest radiation dose. Since an EM calorimeter also makes the most precise energy measurement, special care must be lavished on this part of a calorimeter. Previous studies have concentrated on Monte Carlo examinations of 2 longitudinal compartments within the EM which can alleviate radiation damage. Recently, it was realized that a ``shower maximum`` detector, such as exists in CDF, also contains information of the conversion point of an electromagnetic shower. As such, it can potentially be used in a fashion analogous to the longitudinal compartments, although it is not designed to be optimized for this role.

The SCC radiation field is higher than that encountered by previous hadron collider detectors. In particular, the electromagnetic (EM) calorimeter compartment sees the highest radiation dose. Since an EM calorimeter also makes the most precise energy measurement, special care must be lavished on this part of a calorimeter. Previous studies have concentrated on Monte Carlo examinations of 2 longitudinal compartments within the EM which can alleviate radiation damage. Recently, it was realized that a shower maximum'' detector, such as exists in CDF, also contains information of the conversion point of an electromagnetic shower. As such, it can potentially be used in a fashion analogous to the longitudinal compartments, although it is not designed to be optimized for this role.