The traveler presented a paper entitled Susceptibility of Asian Ecosystems to Soil-Mediated Acid Rain Damage'' at the Second Workshop on Acid Rain in Asia. The workshop was organized by the Asian Institute of Technology (Bangkok, Thailand), Argonne National Laboratory (Argonne, Illinois), and Resource Management Associates (Madison, Wisconsin) and was sponsored by the US Department of Energy, the United Nations Environment Program, the United Nations Economic and Social Commission for Asia and the Pacific, and the World Bank. Papers presented on the first day discussed how the experience gained with acid rain in North America and Europe might be applied to the Asian situation. Papers describing energy use projections, sulfur emissions, and effects of acid rain in several Asian countries were presented on the second day. The remaining time was allotted to discussion, planning, and writing plans for a future research program.

A linear, frequency independent model of the rf properties of unbiased, soft ferrite has been implemented in finite-difference, time-domain, electromagnetic simulation code AMOS for the purposes of studying linac induction cavities. The simple model consists of adding a magnetic conductivity term ({sigma}{sub m}H) to Faraday's Law. The value of {sigma}{sub m} that is appropriate for a given ferrite at a particular frequency is obtained via an rf reflection experiment on a very thin ferrite toroid in a shorted coaxial line. It was found that in the frequency range 100 to 1000 MHz, the required value of {sigma}{sub m} varies only slightly (<10%), and so we approximated it as a frequency independent parameter in AMOS. A description of the experimental setup and the technique used to extract the complex {mu} from the measurements is described. The model has been used to study the impedances of the DARHT induction cavity, and comparisons between these experimental measurements and AMOS calculations is presented. Implementation of a frequency dependent version of this model in AMOS is being pursued, and a discussion of this effort is given.

We have identified the Motorola 2N4014 and 2N5551 and the Raytheon RS3944 as three transistor types that exhibit avalanche characteristics and have long term collector breakdown voltage stability superior to other transistors tested. Stability on all types has been improved by power burnin. An automatic avalanche transistor burnin tester has been constructed to allow power burnin of up to 1008 transistors at a time. The tester is controlled by an IBM Personal Computer (PC) and can be programmed to acquire data, unattended, at any desired rate or period. Data are collected from each run and stored on a floppy disk in ASCII format. The data analysis software, RS/1, was used for analysis and display. Data runs were typically 3 to 4 months long, with readings taken weekly. The transistors were biased into the avalanche or Zener region by individual current sources set to about 20% of the self-avalanche current for each type of transistor. Motorola, Zetex and National transistors were operated at 100 microamperes ({mu}A), and the Raytheon units were operated at 20 {mu}A. The electric field causes migration of material in the high field region at the surface near the collector-base junction, creating the voltage instability. 7 refs., 9 …

The combustion of chloroethane is modeled as a stirred reactor so that we can study critical emission characteristics of the reactor as a function of residence time. We examine important operating conditions such as pressure, temperature, and equivalence ratio and their influence on destructive efficiency of chloroethane. The model uses a detailed chemical kinetic mechanism that we have developed previously for C{sub 3} hydrocarbons. We have added to this mechanism the chemical kinetic mechanism for C{sub 2} chlorinated hydrocarbons developed by Senkan and coworkers. In the modeling calculations, sensitivity coefficients are determined to find which reaction-rate constants have the largest effect on destructive efficiency. 24 refs., 6 figs., 1 tab.

Coal is our largest domestic energy resource with recoverable reserves estimated at 268 billion short tons or 5.896 quads Btu equivalent. This is approximately 95 percent of US fossil energy resources. It is relatively inexpensive to mine, and on a per Btu basis it is generally much less costly to produce than other energy sources. Its chief drawbacks are the environmental, health and safety concerns that must be addressed in its production and consumption. Historically, coal has played a major role in US energy markets. Coal fueled the railroads, heated the homes, powered the factories. and provided the raw materials for steel-making. In 1920, coal supplied over three times the amount of energy of oil, gas, and hydro combined. From 1920 until the mid 1970s, coal production remained fairly constant at 400 to 600 million short tons a year. Rapid increases in overall energy demands, which began during and after World War II were mostly met by oil and gas. By the mid 1940s, coal represented only half of total energy consumption in the US. In fact, post-war coal production, which had risen in support of the war effort and the postwar Marshall plan, decreased approximately 25 percent between 1945 …

Under the Phase II, Alternative Energy Resources Development (AERD) project of the United States Agency for International Development (USAID) and the Government of India (GOI), five collaborative coal projects have been initiated in the areas of: (1) NO{sub x}/SO{sub x} control from coal-fired power plants, (2) slagging combustor development for high-ash Indian coals, (3) characterization of Indian coals for combustion and gasification. (4) diagnostic studies for prediction of power plant life expectancy, and (5) environmental and natural resource analysis of coal cycle. The Pittsburgh Energy Technology Center (PETC) has the implementation responsibility for these projects. The Indian collaborative institutions identified for these projects are the Bharat Heavy Electricals Ltd. (BHEL), Trichy, (projects 1--4), and the Tata Energy Research Institute (TERI) for project 5. The Oak Ridge National Laboratory (ORNL) is providing cross-cut technical coordination and support for these five projects.

Unlike a genetic map which provides information on the relative position of genes or markers based upon the frequency of genetic recombination, a physical map provides a topographical picture of DNA, i.e. distances in base pairs between landmarks. The landmarks may be genes, gene markers, anonymous sequences, or cloned DNA fragments. Perhaps the most useful type of physical map is one that consists of an overlapping set of cloned DNA fragments (contigs) that span the chromosome. Once genes are assigned to this contig map, sequencing of the genomic DNA can be prioritized to complete the most interesting regions first. While, in practice, complete coverage of a complex genome in recombinant clones may not be possible to achieve, many gaps in a clone map may be closed by using multiple cloning vectors or uncloned large DNA fragments such as those separated by electrophoretic methods. Human chromosome 19 contains about 60 million base pairs of DNA and represents about 2% of the haploid genome. Our initial interest in chromosome 19 originated from the presence of three DNA repair genes which we localized to a region of this chromosome. Our approach to constructing a physical map of human chromosome 19 involves four steps: …

The Department of Energy (DOE) and the Commission of the European Communities (CEC) have been exploring the possibility of parallel studies on the externals costs of employing fuel cycles to deliver energy services. These studies are of particular importance following the activities of the US National Energy Strategy (NES), where the potential discrepancies between market prices and the social costs of energy services were raised as significant policy concerns. To respond to these concerns, Oak Ridge National Laboratory (ORNL) and Resources for the Future (RFF) have begun a collaborative effort for the DOE to investigate the external costs, or externalities, generated by cradle to grave fuel cycle activities. Upon initiating this project, the CEC expressed an interest to the DOE that Europe should conduct a parallel study and that the two studies should be highly coordinated for consistency in the results. This series of meetings with members of the CEC was undertaken to resolve some issues implied by pursuing parallel, coordinated studies; issues that were previously defined by the August meetings. In addition, it was an opportunity for some members of the US research team and the DOE sponsor to meet with their European counterparts for the study, as well …

Most of the progress made since September 1, 1989 is one of two types: programming or orgamzmg. In general Xpresslink has gained in a programming sense (more I/O blocks, new and revised operation screens, new key macros, broader historical trending), and the ladder has improved in an organizational sense. A database called '.CNTRL RM INFO' has been installed on the control room Mac hard disk in the Control Room folder in the Word Processors folder. This file should be updated regularly.

The D0 Cryo System is monitored by a computerized process control system and an ODH safety system. During steady state operations the cryo system will be unmanned and system experts will depend on communication systems for notification of system problems. The FIRUS system meets the minimum communication requirement and is supplemented with an autodialer which attempts to contact cryo operators by pager or phone. The RD/Safety Department requires the ODH monitor system to be connected to the labwide FIRUS system. which enables the Communications Center to receive alarms and notify the proper experts of the condition. The ODH system will have two alarm points. One for an ODH alarm and one for a system trouble alarm. The autodialer system has replaced a former cryo operations summation alarm point in the FIRUS system. This has freed space on the FIRUS system and has allowed the cryo experts more flexibility in setting up their own communication link. The FIRUS and the autodialer systems receive alarms and access lists of experts to call for notification of problems. Attempts to contact these experts will continue until the alarm or alarms is acknowledged.

The structural characteristics of (111) twist boundaries in gold are investigated using a combination of x-ray diffraction and computer modeling techniques. Comparison of the measured scattering effects with those generated from EAM computer models reveals that the (111) boundary displacement field is weak, rotational in form and centered on O' lattice sites. Furthermore, the measured intensities of the strong O' lattice reflections decrease smoothly with increasing boundary angle up to 30{degree}, as calculated from the model. The effect of double positioning on the diffraction pattern and the structural analysis is discussed. 9 refs., 2 figs.

Recent studies concerning optimization parameters for e{sup +}e{sup {minus}} super linear colliders use multiple particle bunches for each rf pulse to increase the luminosity and overall efficiency. Requirements for final focusing of the beams severely restrict the bunch to bunch energy variation during the rf pulse. To accurately determine the accelerating fields and energy variation, the dispersion related transient behavior of the rf drive pulse must be considered. A numerical study of dispersion effects on several different accelerating structures is presented.

This report is intended to provide a general understanding of the social costs associated with electric power generation. Based on a thorough review of recent literature on the subject, the report describes how these social costs can be most fully and accurately evaluated, and discusses important considerations in applying this information within the competitive bidding process. [DJE 2005]

High gain Inertial Confinement Fusion (ICF) targets require a highly uniform drive. In the case of direct drive, the inherent non-uniformities in a high-power glass laser beam are large enough to prevent high compression of targets. In recent years two methods for smoothing the laser drive, Induced Spatial Incoherence (ISI) and Smoothing by Spectral Dispersion (SSD), have been proposed. Both methods break the original laser beam up into many beamlets that then interfere at the target to produce an illumination pattern with large instantaneous intensity variations over a wide range of spatial scales. This interferences pattern dances around at the coherence time of the laser and averages out to produce a smooth beam on longer time scales. Indirect drive schemes shine the laser on high-Z material, usually gold, which converts the laser energy into x-rays. The x-rays are then used to drive the target. Non-uniformities in the laser beam can imprint themselves on the emitted x-rays and potentially cause problems, although the spatial transport of the x-rays to the target tends to smooth out these non-uniformities. As a result, ISI and SSD schemes are also being considered for indirect drive laser systems. We address this problem by modeling the effects …

This report surveys the preliminary work of P. J. Ebert, a proponent of the Magnetic Bubble'' Effect, as well as conclusions reached by L. F. Wouters and others. The idea behind the Magnetic Bubble Effect is that an exploding fireball from a surface or subsurface nuclear explosion releases electrons which circulate around the earth's magnetic field lines and create an expanding magnetic dipole which persists underground for {approx equal}0.01 sec. This dipole radiates a low-frequency electromagnetic field through the earth in a diffusive manner because the earth's conduction current overwhelms the displacement current at VLF and ELF frequencies. By using this concept of diffusive fields it might be possible to estimate the yield of an underground nuclear test from transient low-frequency field measurements on or near the ground in the range 1--5km from ground zero. We closely examine the diffusive-field description of the transient fields by L. W. Miller. Miller's work enables us to derive rather easily the Green-function'' fields in space and time of a spatially and temporally impulsive vertical magnetic dipole, m{sub z}, and horizontal dipole, m{sub x}, in a homogeneous earth of scalar electrical conductivity {sigma}, magnetic permeability {mu}{sub 0}, and relative dielectric constant, {var epsilon}{sub r}, …

This report addresses groundwater modeling performed to support the Environmental Impact Statement (EIS) that is being prepared by the Department of Energy (DOE). The EIS pertains to construction and operation of a new production reactor (NPR) that is under consideration for the Savannah River Site (SRS). Three primary issues are addressed by the modeling analysis: (1) groundwater availability, (2) changes in vertical hydraulic gradients as a result of groundwater pumpage, and (3) migration of potential contaminants from the NPR site. The modeling indicates that the maximum pumpage to be used, 1000 gpm, will induce only minor drawdown across SRS. Pumpage of this magnitude will have a limited effect on the upward gradient from the Cretaceous into the Tertiary near Upper Three Runs Creek. Potentiometric surface maps generated from modeled results indicate that horizontal flow in the water table is either towards Four Mile Creek to the north or to Pen Branch on the south. Particle tracking analysis indicates that the primary flow paths are vertical into the Lower Tertiary Zone, with very little lateral migration. Total travel times from the NPR site to the edge of the model (approximately 3 miles) is on the order of 50 years. The flow …

The development of Inertial Confinement Fusion (ICF) as a power source will require demonstrating four principal objectives: ignition and propagating burn, adequate gain ({eta}G {approx gt} 10) at low drive energy for the reactor driver, reactor pulse rates of a few Hz, and the long-term reliability and economics of a reactor. Additionally, the potential value and applicability of special-purpose ICF reactors, such as tritium breeding reactors and reactors for burning high level fission waste (actinide and fission products) should be investigated. To keep development time and costs to a minimum these should be accomplished with as few major facilities as possible, and subsystems should be developed only as they are needed. A viable scenario for Inertial Fusion Energy (IFE) would include establishing the first milestone in the National Academy of Sciences (NAS) and Fusion Policy Advisory Committee (FPAC) recommended Nova Upgrade, and the latter three in an Engineering Test Facility (ETF)/Demonstration Power Plant (DPP), i.e. two major facilities. To be successful in so short a time, operations at the major facilities would have to be supported by off-line reactor driver and other technology development. The program plan discussed here assumes that enhanced funding is available beginning in FY 1992. It …

This report covers the activity of the traveler participating in a workshop entitled The 13th Werner Brandt Workshop on the Interaction of Charged Particles with Solids and conducting collaborative research with two physicists at Tokyo University. The Werner Brandt Workshops are organized by members of the traveler's group, led by Dr. R. H. Ritchie, with advice from an international committee. The traveler participated in planning for the next in the series of workshops, which will be held in or near the traveler's home base. Oak Ridge, Tennessee, in early 1992. He interacted with scientists from Japan, Spain, USSR, Israel, and other countries, initiated plans for a new collaboration with a Japanese scientist, and renewed existing collaborations, At Tokyo University, the traveler performed collaborative research with Professors Y. Yamazaki and K. Komaki on two topics of importance to the traveler's programs with the Department of Energy (DOE).

This report highlights activities, events, and analyses of interest to public and private sector oganizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. 33 tabs.

Research continued on catalysts of coal liquefaction. Estimates of liquid circulation rates were obtained from an analysis of the cold model data and a plot of these values versus stirrer speed appears to be unique for the 60{degree} axial impeller. The recycle ration is typically of the order of 1000/1 or greater, and for all practical purposes the reactor may be treated as a perfectly mixed reactor. The work up of hydrotreating Run PDJ03 is complete. The run was terminated prematurely due to a rupture disk failure, but eight of the ten planned balance periods were completed. Carbon material balances were slightly high, ranging from 100.7% to 106.7%. Reaction rates for hydrogen uptake, hydrodesulfurization and hydrodenitrogenation were calculated. The catalyst did not deactivate significantly for the duration of the run and no evidence of catalyst attrition was observed after 215 hours of service. 8 refs., 4 figs., 2 tabs.

This report describes research on oil shale. Above ground retorting, process modeling, and shale oil coking kinetics over oxidized recycle shale are discussed. 13 refs., 13 figs., 12 tabs.

Path planning among movable obstacles is a practical problem that is in need of a solution. In this paper an efficient heuristic algorithm that uses a generate-and-test paradigm: a good'' candidate path is hypothesized by a global planner and subsequently verified by a local planner. In the process of formalizing the problem, we also present a technique for modeling object interactions through contact. Our algorithm has been tested on a variety of examples, and was able to generate solutions within 10 seconds. 5 figs., 27 refs.

A series of pressurization tests of a 3.5-km deep body of jointed crystalline rock has shown that both the pressure deformation (i.e., dilation) of the region and the boundary permeation are nonlinear functions of the effective stress. This is because the apertures for both the joints and microcracks are strong functions of the effective normal stress acting to close them. For a surface pressure increase from zero to 7.5 MPa, the fluid storage in the natural joints and microcracks in this 0.3 km{sup 3} volume of rock increased by 1470 m{sup 3}. The corresponding increase in fluid storage between 7.5 and 15 MPa was 1090 m{sup 3}. However, even at a surface pressure level of 15 MPa, the permeation loss rate from this large volume of rock is only 0.3 l/s after six months of pressure maintenance. Using transient nonlinear numerical modeling, it is shown that the pressure-dependent fracture permeability model of Gangi, and the fracture porosity equivalent, adequately represent the measured permeability and porosity data obtained to date from this continuing series of pressurization experiments.

This is a report of the progress during the past year of the shock-tube study of the Richtmyer-Meshkov instability, initiated under the sponsorship of the Lawrence Livermore National Laboratory in September, 1982. The purpose of this research program, as stated in the original proposal, is: to investigate the nonlinear processes initiated by shock wave interaction with gas-gas interfaces. In particular, the nonlinear stage of shock-initiated Rayleigh-Taylor instability, the secondary instabilities (e.g., Kelvin-Helmholtz instability) arising therefrom and the concomitant mixing of the two fluids are of interest.''