The Axicell MFTF-B magnet system will provide the field environment necessary for tandem mirror plasma physics investigation with thermal barriers. The performance of the device will stimulate DT to achieve energy break-even plasma conditions. Operation will be with deuterium only. There will be 24 superconducting coils consisting of 2 sets of yin-yang pairs, 14 central-cell solenoids, 2 sets of axicell mirror-coil pairs, and 2 transition coils between the axicell mirror coil-pairs and the yin-yang coils. This paper describes the progress in the design and construction of MFTF-B Superconducting-Magnet System.

Effort is reported on measurement technique development to assess the utility of Deep-Level Transient Spectroscopy (DLTS) methods in characterizing polycrystalline silicon that was deliberately doped with Ti during growth. Difficulties encountered with lateral DLTS measurements are discussed. In this approach, modulation of the grain boundary, double-depletion region produces the entire DLTS signal. Major effort has been applied in grain boundary characterization and control. The most significant accomplishments to date have involved laser scanning of slices of Wacker SILSO polysilicon having nearly identical grain structure. By using various kinds of treatments and by comparing treated and untreated substrates having nearly identical grain structure, control of grain boundary photocurrent suppression (..delta..I/sub ph/) over the range 1% less than or equal to ..delta..I/sub ph/ less than or equal to 40% was demonstrated.

The pilot plant reverse osmosis system was demonstrated to be effective in removing large percentages of cobalt-60, iodine-125, and a mixture of cesium-137, cobalt-60, and iodine-125 from two types of aqueous streams. The effectiveness of three membrane porosities, 0, 50, and 97% salt rejection, were explored with each isotope. The 97% salt rejection membrane was the most effective in each experiment. Removals as high as 97.5% of the cobalt, 92.9% of the iodine and 95.1% of the combined isotopes were achieved. The effect of possibly interfering factors on the adsorbence of cobalt-60 and iodine-129 on selected ion exchange resins were investigated. The factors thought to affect cobalt-60 adsorption were (OH/sup -/), (NH/sub 4//sup +/), and (SO/sub 3//sup =/). None of the seven factors investigated had any effect on iodine-129 adsorption. Cesium-137 was removed from a 4600-gal aqueous waste containing a large amount of sodium hydroxide by treatment with sodium tetraphenyl boron. The cesium concentration of the supernatant portion was reduced from 570 to 4 counts/min/ml.

This paper describes the cooldown and testing of the first yin-yang magnet for the Mirror Fusion Test Facility. The introduction describes the superconducting magnet; the rest of the paper explains the tests prior to and including magnet cooldown and final acceptance testing. The MFTF (originally MX) was proposed in 1976 and the project was funded for construction start in October 1977. Construction of the first large superconducting magnet set was completed in May 1981 and testing started shortly thereafter. The acceptance test procedures were reviewed in May 1981 and the cooldown and final acceptance test were done by the end of February 1982. During this acceptance testing the magnet achieved its full design current and field.

The design of the Target Fabrication Tritium Laboratory for deuterium-tritium fuel processing for laser fusion targets has been accomplished with the intent of providing redundant safeguard systems. The design of the tritium laboratory is based on a combination of tritium handling techniques that are currently used by experienced laboratories. A description of the laboratory in terms of its interrelated processing systems is presented to provide an understanding of the design features for safe operation.

Progress is reported in the following areas: (1) high pressure structural phase transition in Na, Mg and Al; (2) thermal and compressibility properties of the alkali metals; (3) electrical cnductivity in hydrogen plasmas; (4) plasma pseudopotentials; (5) thermonuclear reaction rates in strongly coupled plasmas; (6) thermodynamic consistency in BQL interpolants; (7) nonequilibrium molecular dynamics of plastic flow; (8) constitutive models in the LLNL hydrodynamic codes; (9) turbulence interaction with thermochemically inert solid particles; (10) the equation of state of molecular hydrogen and deuterium from shock-wave experiments at 760 kbar; and (11) nuclear-explosive-driven equation-of-state experiment. (WHK)

A detailed study of the low beta insertion for the B0 experimental area has been carried out and is described below. This insertion is similar to the Type C low beta previously report, anti p Note 169, although some changes have been made to the quadrupole lengths and positions. This insertion is designated Type E. The purpose of the study was to see if it is possible to turn the insertion on in a smooth and continuous manner and tune the insertion to a value of ..beta..* of less than one meter while maintaining the overall tune of the j Tevatron to a constant value. This was found to be possible. An examination of chromaticity corrections for the Tevatron with the low beta insertion on in various configurations was also undertaken.

A summary of the problems (encountered as well as anticipated) associated with reinjection of heat-depleted brines and injection of other fluids such as imported brines and gases is presented. Covered are only injection and reinjection problems which are related to the exploitation of liquid-dominated resources by flash-cycle power plants. Suggestions (proven as well as probable) which may offer solutions to many of the identified problems are also covered. In addition, some ideas that should or could be implemented in planning of implementing and/or executing any new geothermal injection operation are described.

Noise characteristics of the continuous-wave wide-band amplifier systems for stochastic beam cooling experiments are presented. Also, the noise performance, bandwidth capability and gain stability of components used in these amplifiers are summarized and compared in the 100 MHz to 40 GHz frequency range. This includes bipolar and field-effect transistors, parametric amplifier, Schottky diode mixer and maser. Measurements of the noise characteristics and scattering parameters of variety GaAs FETs as a function of ambient temperature are also given. Performance data and design information are presented on a broadband 150-500 MHz preamplifier having noise temperature of approximately 35/sup 0/K at ambient temperature of 20/sup 0/K. An analysis of preamplifier stability based on scattering parameters concept is included.

The revision of Chapter 18 of NUREG 0800, Human Factors Engineering Standard Review Plan (SRP) will be based on SECY 82-111 and guidance contained in NUREG 0700, NUREG 0801 and NUREG 0835, plus other references. In conducting field reviews of control rooms, the NRC has identified technical issues which can be used to enhance the development of the revised version of NUREG 0800, and to establish priorities among the list of possible Branch Technical Positions (BTP) in NUREG 0800, Rev. 0, Table 18.0-2. This report is a compilation of comments and suggestions from the people who used NUREG 0700 in the Control Room field reviews. This information was used to establish possible BTP topic priorities so that the most important BTPs could be issued first. The comments and suggestions are included for HFEB review in conjunction with the table of priorities.

Microearthquakes, defined as shocks having magnitudes less than 4, are commonly recorded in the vicinity of geothermal manifestations and volcanism. They have been mapped from producing geothermal fields as well as those not yet developed, in such places as Iceland, El Salvador, Japan, Kenya and the US. Microearthquakes have been recorded at several geothermal sites in the Imperial Valley and Coso Hot Springs, California; Kilbourne Hole, New Mexico; Yellowstone National Park, Wyoming; and The Geysers, California, where there is debate over whether or not the seismicity is induced by steam production. Seismicity occurs around active volcanoes, but appears reduced directly over zones of high temperature or magma, where the depth of the brittle fracture zone is shallow, as over Yellowstone caldera. In areas of active hydrothermalism, regional stress is likely to be relieved by low-level seismicity rather than occasional large ruptures, owing to the high temperatures, presence of fluids, and crustal weakening due to alteration and fracturing. Active faulting maintains the permeability of the system, which in its absence, might otherwise seal. on the microscopic scale, pore-fluid pressures rise as a result of heating, resulting in the decrease of effective pressure at the pore-mineral boundary. When this effective pressure becomes …

A model has been developed that allows the design of geothermal production wells. This design problem is quite complex because of the many physical and chemical phenomena that take place in the well bore, each of which has a significant influence on the well performance with respect to total flow rate of brine and steam, pressure loss up the well, or wellhead pressure available for the power producing system, scaling and plugging of the well due to chemical precipitates. The accuracy of the design predictions were determined by comparing them with new well test data developed as part of this project. The general theory behind two-phase flow phenomena and the theory that describes the operation of the model ere described in previous reports (1, 2). This report provides a final version of the computer code, called DEGEOWEL that accomplishes the calculations according to the model. This final version incorporates the preferred correlations developed under this project for determining the flow regime, holdup and frictional pressure drop in two-phase flow. [DJE-2005]

Recent experiments have extended the mechanical properties data base of 20 percent cold worked 316 stainless steel to a fluence of 1.3 x 10/sup 23/ n/cm/sup 2/ (E > 0.1 MeV), the goal exposure of the Fast Flux Test Facility. Both uniaxial and biaxial tests were conducted on speciments of developmental cladding which were irradiated in the Experimental Breeder Reactor-II at temperatures ranging from 370/sup 0/C to 650/sup 0/C. Uniaxial tensile tests were conducted at strain rates ranging from 10/sup -5//s to 10/sup -//sub 3//s. Controlled Biaxial Strain Rate (CBSR) tests, recently developed at the Hanford Engineering Development Laboratory, were conducted only at a strain rate of 10/sup -5//s. CBSR specimens are gas-loaded to produce a constant diametral strain rate. These tests are otherwise analogous to uniaxial tensile tests. The tensile strength and ductility of the cladding were generally in good agreement with the predicted values.

A hydrologic test system has been designed to measure the intrinsic permeabilities of individual fractures in crystalline rock. This system is used to conduct constant pressure-declining flow rate and pressure pulse hydraulic tests. The system is composed of four distinct units: (1) the Packer System, (2) Injection system, (3) Collection System, and (4) Electronic Data Acquisition System. The apparatus is built in modules so it can be easily transported and re-assembled. It is also designed to operate over a wide range of pressures (0 to 300 psig) and flow rates (0.2 to 1.0 gal/min). This system has proved extremely effective and versatile in its use at the Climax Facility, Nevada Test Site.