This report describes: Cedar System Hardware; Compiler and Software Issues on Memory Management; Operating Systems; Compilers; and Multiprocessor Performance on Algorithms and Applications.

The CZD process involves flue gas post-treatment, physically located between a boiler's outlet and its particulate collector, which in the majority of cases is an electrostatic precipitator. The features that distinguish this process from other similar injection processes are: Injection of an alkaline slurry directly into the duct, instead of injection of dry solids into the duct ahead of a fabric filter. Use of an ultrafine calcium/magnesium hydroxide, type S pressure-hydrated dolomitic lime. This commercial product is made from plentiful, naturally occurring dolomite. Low residence time, made possibly by the high effective surface area of the type S lime. Localized dispersion of the reagent. Slurry droplets contact only part of the gas while the droplets are drying, to remove up to 50 percent of the SO{sub 2} and significant amounts of NO{sub x}. The process uses dual fluid rather than rotary atomizers. Improved ESP performance via gas conditioning from the increased water vapor content, and lower temperatures. Supplemental conditioning with SO{sub 3} is not believed necessary for satisfactory removal of particulate matter. The waste product is composed of magnesium and calcium sulfite and sulfate, with some excess lime. This product mixed with fly ash is self-stabilizing because of the excess …

The objectives of this project were to (1) study the scope of the beneficial effects of hydrothermal pretreatment of coal on subsequent conversion, (2) identify and study the chemical or physical causes of this effect, and (3) attempt to elucidate the chemistry responsible for any coal-resid synergisms.

The objectives of this project were to (1) study the scope of the beneficial effects of hydrothermal pretreatment of coal on subsequent conversion, (2) identify and study the chemical or physical causes of this effect, and (3) attempt to elucidate the chemistry responsible for any coal-resid synergisms.

This document describes ideal and resistive MHD studies of high-beta plasmas and of the second stability region. Significant progress is reported on the resistive stability properties of high beta poloidal supershot'' discharges. For these studies initial profiles were taken from the TRANSP code which is used extensively to analyze experimental data. When an ad hoc method of removing the finite pressure stabilization of tearing modes is implemented it is shown that there is substantial agreement between MHD stability computation and experiment. In particular, the mode structures observed experimentally are consistent with the predictions of the resistive MHD model. We also report on resistive stability near the transition to the second region in TFTR. Tearing modes associated with a nearby infernal mode may explain the increase in MHD activity seen in high beta supershots and which impede the realization of Q{approximately}1. We also report on a collaborative study with PPPL involving sawtooth stabilization with ICRF.