EDOT is a code that calculates the slowing down of a test particle in a Maxwellian plasma utilizing continuous slowing down theory. Both nuclear scattering and reactions are included. The output includes slowing down parameters as well as spectra of knock-on ions and in-flight reaction probabilities. The theory, input, and output for the code are described.

An impulse turbine for Total Flow utilization of geothermal fluids was tested. Performance measurements verify the calculational model. The research goal of 70% engine efficiency remains credible. Addition of acid to the brine prevents scaling and precipitation at moderate costs. Corrosion and erosion of turbine materials for the Total Flow Process are not severe. (JB)

This paper contains viewgraphs on the topic of radiation effects of solid state materials. In particular, it elaborates on ion beam deposition of thin film structures, ion implantation damage in crystals of Al/sub 2/O/sub 3/, and ion implanted optical waveguides in LiNbO/sub 3/. (LSP)

In the separation of mixtures of radioactive iron and cobalt from neutron irradiated targets and in the removal of iron from cobalt targets for cyclotron production of radioiron, it is desirable to have a method superior to extraction from isopropyl ether in efficiency and ease of manipulation. Recent studies by Moore and Kraus on the separation of cobalt and nickel and on the behavior of iron in hydrochloric acid on Dowex-l resin in relation to the selective adsorption of chloride complexes of these elements have suggested the use of resin for the separation of iron and cobalt.

Recent reports have shown that, despite efforts to the contrary, chemical accidents continue to occur at an unacceptable rate and there is no evidence that this rate is decreasing. Based on this observation, one can conclude that previous analyses have not accurately identified and implemented appropriate fixes to eliminate identified root causes for chemical events. Based on this, it is time to reevaluate chemical accident data with a fresh eye and determine (a) what corrective actions have already been identified but have not been implemented, (b) what other root causes may be involved, and (c) what new corrective actions should be taken to eliminate these newly identified root causes.

Presentation covers new content available on the Alternative Fuels and Advanced Vehicle Data Center regarding diesel vehicles, diesel exhaust fluid, and selective catalytic reduction technologies.

This document reports the results of Phase I Single Cell testing of an SO{sub 2}-Depolarized Water Electrolyzer. Testing was performed primarily during the first quarter of FY 2008 at the Savannah River National Laboratory (SRNL) using an electrolyzer cell designed and built at SRNL. Other facility hardware were also designed and built at SRNL. This test further advances this technology for which work began at SRNL in 2005. This research is valuable in achieving the ultimate goal of an economical hydrogen production process based on the Hybrid Sulfur (HyS) Cycle. The focus of this work was to conduct single cell electrolyzer tests to further develop the technology of SO{sub 2}-depolarized electrolysis as part of the HyS Cycle. The HyS Cycle is a hybrid thermochemical cycle that may be used in conjunction with advanced nuclear reactors or centralized solar receivers to produce hydrogen by water-splitting. Like all other sulfur-based cycles, HyS utilizes the high temperature thermal decomposition of sulfuric acid to produce oxygen and regenerate sulfur dioxide. The unique aspect of HyS is the generation of hydrogen in a water electrolyzer that is operated under conditions where dissolved sulfur dioxide depolarizes the anodic reaction, resulting in substantial voltage reduction. Low cell …

We present the first statistically meaningful results fromtwo-K0s interferometry in heavy-ion collisions. A model that takes theeffect of the strong interaction into account has been used to fit themeasured correlation function. The effects of single and coupled channelwere explored. At the mean transverse mass m_T = 1.07 GeV, we obtain thevalues R = 4.09 +- 0.46 (stat.) +- 0.31 (sys) fm and lambda = 0.92 +-0.23 (stat) +- 0.13 (sys), where R and lambda are the invariant radiusand chaoticity parameters respectively. The results are qualitativelyconsistent with m_T systematics established with pions in a scenariocharacterized by a strong collective flow.

Using a sample of 383 million B{bar B} events collected by the BABAR experiment, they measure sums of seven exclusive final states B {yields} X{sub d(s)}{gamma}, where X{sub d}(X{sub s}) is a non-strange (strange) charmless hadronic system in the mass range 0.6-1.8 GeV/c{sup 2}. After correcting for unmeasured decay modes in this mass range, they obtain a branching fraction for b {yields} d{gamma} of (7.2 {+-} 2.7(stat.) {+-} 2.3(syst.)) x 10{sup -6}. Taking the ratio of X{sub d} to X{sub s} they find {Lambda}(b {yields} d{gamma})/{Lambda}(b {yields} s{gamma}) = 0.033 {+-} 0.013(stat.) {+-} 0.009(syst.), from which they determine |V{sub td}/V{sub ts}| = 0.177 {+-} 0.043.

Reactivity transients have been analyzed with an updated RELAPS-3D (ver. 2.4.2) system model of the pin core design for the 2400MWt gas-cooled fast reactor (GCFR). Additional reactivity parameters were incorporated in the RELAP5 point-kinetics model to account for reactivity feedbacks due to axial and radial expansion of the core, fuel temperature changes (Doppler effect), and pressure changes (helium density changes). Three reactivity transients without scram were analyzed and the incidents were initiated respectively by reactivity ramp, loss of load, and depressurization. During the course of the analysis the turbine bypass model for the power conversion unit (PCU) was revised to enable a better utilization of forced flow cooling after the PCU is tripped. The analysis of the reactivity transients demonstrates the significant impact of the PCU on system pressure and core flow. Results from the modified turbine bypass model suggest a success path for the GCFR to mitigate reactivity transients without scram.

Numerical Modeling of Solid Gas Flow, System Identification for purposes of modeling and control, and Wireless Sensor and Actor Network design were pursued as part of this project. Time series input-output data was obtained from NETL's Morgantown CFB facility courtesy of Dr. Lawrence Shadle. It was run through a nonlinear kernel estimator and nonparametric models were obtained for the system. Linear and first-order nonlinear kernels were then utilized to obtain a state-space description of the system. Neural networks were trained that performed better at capturing the plant dynamics. It is possible to use these networks to find a plant model and the inversion of this model can be used to control the system. These models allow one to compare with physics based models whose parameters can then be determined by comparing them against the available data based model. On a parallel track, Dr. Kumar designed an energy-efficient and reliable transport protocol for wireless sensor and actor networks, where the sensors could be different types of wireless sensors used in CFB based coal combustion systems and actors are more powerful wireless nodes to set up a communication network while avoiding the data congestion. Dr. Ahmadi's group studied gas solid flow in …

The full-scale cold crucible test on vitrification of sludge batch 4 (SB4) Savannah River Site HLW surrogate using a 418 mm inner diameter stainless steel crucible was carried-out for 66 hrs. Commercially available Frit 503-R4 (8 wt.% Li{sub 2}O, 16 wt.% B{sub 2}O{sub 3}, 76 wt.% SiO{sub 2}) was used as a glass forming additive at a calcine to frit ratio of 1:1 (50 wt.% calcine, 50 wt.% frit). Two portions of slurry prepared from frit and mixture of chemicals simulating waste in amount of {approx}750 kg and from frit and waste surrogate prepared by the SRT-MST-2007-00070 procedure in amount of {approx}1,300 kg with water content of {approx}27 and {approx}50 wt.%, respectively, was processed and {approx}875 kg of the vitrified product in total ({approx}415 + 460 kg) was obtained. Average parameters were as follows: vibration power - 121.6 to 134.1 kW, feed rate (capacity) - 25.1 to 39.8 kg/hr, glass pour rate (productivity) - 14.0 kg/hr specific energy expenses for feed processing - 4.8 to 3.4 kW x hr/kg, specific energy expenses for glass production (melting ratio) - 8.7 to 9.6 kW x hr/kg, specific glass productivity - 2453 kg/(m{sup 2} x d). The product was composed of major vitreous …

Savannah River Site (SRS) sludge batch 4 (SB4) waste surrogate with high aluminum and iron content was vitrified with commercially available Frit 503-R4 (8 wt.% Li{sub 2}O, 16 wt.% B2O3, 76 wt.% SiO{sub 2}) by cold crucible inductive melting using lab- (56 mm inner diameter), bench- (236 mm) and large-scale (418 mm) cold crucible. The waste loading ranged between 40 and 60 wt.%. The vitrified products obtained in the lab-scale cold crucible were nearly amorphous with traces of unreacted quartz in the product with 40 wt.% waste loading and traces of spinel phase in the product with 50 wt.% waste loading. The glassy products obtained in the bench-scale cold crucible are composed of major vitreous and minor iron-rich spinel phase whose content at {approx}60 wt.% waste loading may achieve {approx}10 vol.%. The vitrified waste obtained in the large-scale cold crucible was also composed of major vitreous and minor spinel structure phases. No nepheline phase has been found. Average degree of crystallinity was estimated to be {approx}12 vol.%. Anionic motif of the glass network is built from rather short metasilicate chains and boron-oxygen constituent based on boron-oxygen triangular units.

The Einstein radius plays a central role in lens studies as it characterizes the strength of gravitational lensing. In particular, the distribution of Einstein radii near the upper cutoff should probe the probability distribution of the largest mass concentrations in the universe. Adopting a triaxial halo model, we compute expected distributions of large Einstein radii. To assess the cosmic variance, we generate a number of Monte-Carlo realizations of all-sky catalogues of massive clusters. We find that the expected largest Einstein radius in the universe is sensitive to parameters characterizing the cosmological model, especially {sigma}{sub s}: for a source redshift of unity, they are 42{sub -7}{sup +9}, 35{sub -6}{sup +8}, and 54{sub -7}{sup +12} arcseconds (errors denote 1{sigma} cosmic variance), assuming best-fit cosmological parameters of the Wilkinson Microwave Anisotropy Probe five-year (WMAP5), three-year (WMAP3) and one-year (WMAP1) data, respectively. These values are broadly consistent with current observations given their incompleteness. The mass of the largest lens cluster can be as small as {approx} 10{sup 15} M{sub {circle_dot}}. For the same source redshift, we expect in all-sky {approx} 35 (WMAP5), {approx} 15 (WMAP3), and {approx} 150 (WMAP1) clusters that have Einstein radii larger than 2000. For a larger source redshift of 7, …

Staff of the King County Wastewater Treatment Division (WTD) have concern about the aftermath of a radiological dispersion event (RDE) leading to the introduction of significant quantities of radioactive material into the combined sanitary and storm sewer system in King County, Washington. Radioactive material could come from the use of a radiological dispersion device (RDD). RDDs include "dirty bombs" that are not nuclear detonations but are explosives designed to spread radioactive material (National Council on Radiation Protection and Measurements (NCRP) 2001). Radioactive material also could come from deliberate introduction or dispersion of radioactive material into the environment, including waterways and water supply systems. This document develops plausible and/or likely scenarios, including the identification of likely radioactive materials and quantities of those radioactive materials to be involved. These include 60Co, 90Sr, 137Cs, 192Ir, 226Ra, plutonium, and 241Am. Two broad categories of scenarios are considered. The first category includes events that may be suspected from the outset, such as an explosion of a "dirty bomb" in downtown Seattle. The explosion would most likely be heard, but the type of explosion (e.g., sewer methane gas or RDD) may not be immediately known. Emergency first responders must be able to quickly detect the radioisotopes …

Goal is to develop a Hall cell cathode, which will reduce the specific energy consumption of existing commercial cells by 20 to 25%. Basis of the improvement is the utilization of titanium diboride (TiB/sub 2/), a material that is wetted by molten aluminum, as the cell cathode. This provides a stable cathode surface, thereby allowing the cell to be operated at a smaller anode-cathode distance (ACD). Energy savings arise as a result of reduced resistive losses through the cryolite electrolyte. This phase of the program is comprised of three integrated parts: (1) materials characterization, (2) pilot cell testing, and (3) a full-sized cell demonstration. During this quarter emphasis continued on rebuilding the 15KA pilot cell to accommodate a highly sloped electrode system. TiB/sub 2/ cathode materials were received, and construction of cell components and peripheral equipment was completed.

Strict limitations on the emission of H/sub 2/S from new geothermal power plants in The Geysers area of northern California have been imposed by Lake and Northern Sonoma County Air Pollution Control Districts. Lake County, under new source review rules, has stipulated that specific technologies shall be utilized to limit H/sub 2/S emissions to 5 lb/h as a condition for determination of compliance. The status of these technologies as well as other ongoing technology development efforts to conserve steam and abate H/sub 2/S are evaluated. Although projections indicate that it may be possible to meet the 5 lb/h limit, there is no firm assurance of achievement at this time because of the unproven, full-scale performance status of some key technologies specified by the air pollution control districts.

None

The progress report discusses activities of the P Division for the month of July, 1949. The B and F piles operated at 275 megawatts and the D pile at 305 megawatts throughout the month except for outages listed under Area Activities. A total of 57.5 tons of metal, at an average concentration of 363 megawatt days/ton (MWD/ton) was discharged from the piles during the month. This included 41.9 tons of Class V (alpha-rolled, triple-dipped, completely transformed) metal at an average concentration of 397 MWD/ton which was discharged without difficulty. A portion of this material was inspected and appears to be satisfactory for exposures at this concentration.

The left-right cross section asymmetry for Z boson production in e{sup +} e{sup {minus}} annihilation (A{sub LR}) is being measured at E{sub cm} 91.5 GeV with the SLD detector at the SLAC Linear Collider (SLC) using a longitudinally polarized electron beam. The electron polarization is continually monitored with a Compton scattering polarimeter, and is typically 22%. At the current time, we have accumulated a sample of 4779 Z events. We find that A{sub LR} = 0.02 {double_bond} 0.07 {doteq} 0.001 where the first error is statistical and the second is systematic. Using this very preliminary measurement, we determine the weak mixing angle defined at the Z boson pole to be sin{sup 2}{sub W}{sup olept} = 0.247 {plus_minus} 0.009.

This work provides a brief overview of past and ongoing efforts at Lawrence Livermore National Laboratory (LLNL) in the area of finite-element modeling of crash and impact problems. The process has been one of evolution in several respects. One aspect of the evolution has been the continual upgrading and refinement of the DYNA, NIKE, and TOPAZ family of finite-element codes. The major missions of these codes involve problems where the dominant factors are high-rate dynamics, quasi-statics, and heat transfer, respectively. However, analysis of a total event, whether it be a shipping container drop or an automobile/barrier collision, may require use or coupling or two or more of these codes. Along with refinements in speed, contact capability, and element technology, material model complexity continues to evolve as more detail is demanded from the analyses. A more recent evolution has involved the mix of problems addressed at LLNL and the direction of the technology thrusts. A pronounced increase in collaborative efforts with the civilian and private sector has resulted in a mix of complex problems involving synergism between weapons applications (shipping container, earth penetrator, missile carrier, ship hull damage) and a more broad base of problems such as vehicle impacts as discussed …

The purpose of the Mark 22 Flow Excursion Follow-On testing was to investigate the theory that approximately 15% of the flow bypassed the primary flow channels in previous testing, whereas the design called for only a 3% bypass. The results of the follow-on tests clearly confirmed this theory. The testing was performed in two phases. During the first phase, characterization tests performed during the earlier test program were repeated.

None

Key component in the CDA instrument is the differential capacitive force sensor. The CDA instrument has four basic components: OEM analytical balance, flexure point and capacitor plates, gas confinement tower and high-voltage bias electrodes, and the furnace. Phyton is in position to purchase an OEM analytical balance; negotations are underway for obtaining the feedback control circuitry for the differential capacitive force sensor. Progress with the differential capacitive force sensor is reviewed.