This report describes a research project that was conducted from August 15, 1985 to February 28, 1992. The project was based on the ultrasonic studies of natural and synthetic silicate melts, and the study of Brillouin scattering of synthetic silicates and oxides. Measurements of the compressional wave velocity and attenuation can be established using the ultrasonic methods. Temperature dependences of silicates can be established by the Brillouin scattering. (MB)

This document describes ideal and resistive MHD studies of high-beta plasmas and of the second stability region. Significant progress is reported on the resistive stability properties of high beta poloidal supershot'' discharges. For these studies initial profiles were taken from the TRANSP code which is used extensively to analyze experimental data. When an ad hoc method of removing the finite pressure stabilization of tearing modes is implemented it is shown that there is substantial agreement between MHD stability computation and experiment. In particular, the mode structures observed experimentally are consistent with the predictions of the resistive MHD model. We also report on resistive stability near the transition to the second region in TFTR. Tearing modes associated with a nearby infernal mode may explain the increase in MHD activity seen in high beta supershots and which impede the realization of Q{approximately}1. We also report on a collaborative study with PPPL involving sawtooth stabilization with ICRF.

Pellet stoves that are considered exempt'' operate at an air-to-fuel ratio in excess of 35:1. They therefore qualify for exemption from the emissions certification process. A primary goal of this project was to determine how a sample of such stoves, operated in homes, would perform compared to their certified cousins,'' which were evaluated the previous year. In-home performance data documenting emissions from exempt stoves and net delivered efficiencies was particularly desired. This project evaluated six pellet stoves representing three major brands in Medford, Oregon. There were three Breckwell model P24FS, one Horizon Eclipse, one Horizon Destiny, and one Earth Stove TP40. The stoves were monitored for four week-long intervals in January and February 1991, for a total of 24 tests. Evaluations were conducted for particulate, CO (carbon monoxide) and PAH (polycyclic aromatic hydrocarbon) emissions and net efficiency. Monitoring was conducted using the AWES (automated woodstove emissions sampler) sampling system. A new data logger, developed for this project, was used to control the AWES and record real time data. 22 refs., 17 figs., 6 tabs.

We have initiated studies that include radiation model validation, improved treatment of the three-dimensional structure of cloud-radiation interactions, and sensitivity runs that will unravel the role of cloud-convection-radiation interactions in the Pacific Sear Surface Temperatures and the overlying Walker and Hadley circulation. The research program is divided into three phases: (1) radiation, (2) cloud parameterization issues; (3) feedback and ocean-atmosphere interactions.

Significant efforts have been devoted, spanning many years, to the problem of sinusoid detection in noise. Many of these efforts have produced superb, yet complex, algorithms which may be difficult to use for a wide segment of the Digital Signal Processing (DSP) community. This paper presents a simple, easily implemented and high effective method which solves this problem. This method severely degrades non-sinusoidal noise while leaving the embedded sinusoid(s) relatively undisturbed. The algorithm, simply put, exploits the difference between the net effect of integration and differentiation of sinusoids versus the effect of these operations on random noise and other signal sequences. The cross-correlation of sine wave with its differentiated (and/or integrated) self is quite high. Conversely, the cross-reduction of a noise sequence with its differentiated (and/or integrated) self is much lower. Therefore, it is reasonable to assume that for sequences consisting of a sinusoid in noise, significant signal-to-noise-ratios (SNRs) in the correlation results are achievable using a combination of differentiation (and/or integration) and cross-correlation operations on such sequences. This technique has been applied to actual Doppler radar data, as well as to synthesized data, with excellent improvement in signal detection capability. 4 refs.

Three-point bend tests were performed to determine the Ductile-Brittle Transition Temperatures (DBTTs) of forged and chemical vapor deposition (CVD) tungsten. Testing was performed under quasi-static conditions at temperatures between 23{degrees}C and 450{degrees}C using a forced-air environmental chamber. Load-displacement data from the three-point bend tests indicated that the constitutive behavior of the materials tested varied considerably. Finite element modeling of the three-point bend test was performed to investigate plastic strains induced in the samples during testing as a function of constitutive behavior. The modeling assumed plane stress conditions in the sample and simple bi-linear elastic-plastic constitutive behavior of the test material. The strains induced in the samples were found to be functions of both the yield stress and work hardening behavior of the materials. The use of the three-point bend test to determine DBTT, and the DBTTs reported for the test materials, are discussed relative to the modeling results. It is concluded that the three-point bend test has some utility in the determination of DBTTs if some caution is used in the selection of test parameters and fixture geometries. However, the three-point bed test does not provide a complete picture of the nature of the ductile-brittle transition. 12 refs., 9 figs.

This report describes: Cedar System Hardware; Compiler and Software Issues on Memory Management; Operating Systems; Compilers; and Multiprocessor Performance on Algorithms and Applications.

Development of a computer system for access to distributed genome mapping data is continuing. This effort is to develop software which accesses multiple databases and retrieves data which contain information useful for accelerating mapping human chromosomes. For example, the molecular sequence databases (GenBank, EMBL Data Library, PIR, SwissProt) which contain data required for the development of oligonucleotides for probing DNA as well as for extracting data for primer pair development for PCR-based methods. It is also to develop software which qualitatively integrates the following mapping data: (1) markers regionally localized using cytogenetic methods, (2) polymorphic markers ordered by genetic linkage analysis, (3) clones ordered by various finger-printing'' methods, (4) fragments ordered by long-range restriction mapping, (5) single genomic fragments or clones that have STSs assigned to them, (6) nucleotide sequences, (7) the associated metadata such as the submitting investigator's name, location, etc; the source organism; the chromosome the element is from; the chromosomal location is whatever detail is available.

The objectives of this project were to (1) study the scope of the beneficial effects of hydrothermal pretreatment of coal on subsequent conversion, (2) identify and study the chemical or physical causes of this effect, and (3) attempt to elucidate the chemistry responsible for any coal-resid synergisms.

The traveler presented a paper entitled Susceptibility of Asian Ecosystems to Soil-Mediated Acid Rain Damage'' at the Second Workshop on Acid Rain in Asia. The workshop was organized by the Asian Institute of Technology (Bangkok, Thailand), Argonne National Laboratory (Argonne, Illinois), and Resource Management Associates (Madison, Wisconsin) and was sponsored by the US Department of Energy, the United Nations Environment Program, the United Nations Economic and Social Commission for Asia and the Pacific, and the World Bank. Papers presented on the first day discussed how the experience gained with acid rain in North America and Europe might be applied to the Asian situation. Papers describing energy use projections, sulfur emissions, and effects of acid rain in several Asian countries were presented on the second day. The remaining time was allotted to discussion, planning, and writing plans for a future research program.

Deposition velocity is a parameter used in atmospheric transport models to specify the amount an atmospheric constituent transferred from the atmosphere to the surface of the earth. The material may deposit on the surface of soil, water, or vegetation. The deposition may be the result of rainfall or diffusion. A method for the calculation of deposition velocity based upon the decrease in deposition with distance from a point source is presented. The method does not require a knowledge of the time over which the deposition occurs or the concentration of the material in the atmosphere. However, the method does assume the deposition rate is proportional to the air concentration. The sensitivity to errors resulting from certain errors in the measurements and from violation of some of the assumptions of the model underlining the calculations are also to be discussed. The method has been used to estimate the deposition velocity of I-129. Two sets of I-129 deposition data at various distances from the center of SRS were used in the calculations. The results indicate that the deposition velocity is near a value of 0.2 cm/s. This is consistent with the processes that are known to control iodine deposition.

This report gives a self-consistent conceptual design for the final focusing'' beam optics and analysis spectrometer optics for the Grating Acceleration Experiment, the Inverse Cerenkov Acceleration Experiment, and the Nonlinear Compton Scattering Experiment. The introductory section describes the basic principles and constraints involved in the overall design. The next two sections give second order TRANSPORT calculations for the final focus system and the spectrometer system for the three experiments. The fourth section presents Monte Carlo simulations of the expected x-y distributions for the spectrometer detector for the three experiments. Appendices A and B contains further details about the assumptions used in the Monte Carlo simulations. Appendix C contains the working drawings used for determining distances on the experimental floor.

The objective of the Consensus Building process for a national energy strategy would be to generate several concrete products, including: (1) An inventory of possible packages which could represent acceptable energy strategies for most key constituencies in developing a fair, efficient wise, and sustainable national energy policy; (2) An inventory of strategic dead ends and policy positions that could generate fierce opposition from specific stakeholding groups if they emerge as part of the eventual strategy, absent compensating trade offs; and, (3) An inventor of the interests and assumptions of the many opposing constituencies. The process would be a sophisticated proving ground where collaborative problem solving techniques could be applied and evaluated. This report in the American Energy Assurance Council's 12-step recommendation for consensus building. They recommend an eight-month timeframe for this project, although they recognize that many interested parties may perceive this as too long. If a shorter timeframe is required, these 12 steps could be time compressed and still produce meaningful results.

This document presents our proposal to continue the activities of Boston University researchers in eight projects in high energy physics research: Colliding Beams Physics; Accelerator Design Physics; MACRO Project; Proton Decay Project; Theoretical Particle Physics; Muon G-2 Project; and Hadron Collider Physics. The scope of each of these projects is presented in detail in this paper.

The CZD process involves flue gas post-treatment, physically located between a boiler's outlet and its particulate collector, which in the majority of cases is an electrostatic precipitator. The features that distinguish this process from other similar injection processes are: Injection of an alkaline slurry directly into the duct, instead of injection of dry solids into the duct ahead of a fabric filter. Use of an ultrafine calcium/magnesium hydroxide, type S pressure-hydrated dolomitic lime. This commercial product is made from plentiful, naturally occurring dolomite. Low residence time, made possibly by the high effective surface area of the type S lime. Localized dispersion of the reagent. Slurry droplets contact only part of the gas while the droplets are drying, to remove up to 50 percent of the SO{sub 2} and significant amounts of NO{sub x}. The process uses dual fluid rather than rotary atomizers. Improved ESP performance via gas conditioning from the increased water vapor content, and lower temperatures. Supplemental conditioning with SO{sub 3} is not believed necessary for satisfactory removal of particulate matter. The waste product is composed of magnesium and calcium sulfite and sulfate, with some excess lime. This product mixed with fly ash is self-stabilizing because of the excess …

This report addresses groundwater modeling performed to support the Environmental Impact Statement (EIS) that is being prepared by the Department of Energy (DOE). The EIS pertains to construction and operation of a new production reactor (NPR) that is under consideration for the Savannah River Site (SRS). Three primary issues are addressed by the modeling analysis: (1) groundwater availability, (2) changes in vertical hydraulic gradients as a result of groundwater pumpage, and (3) migration of potential contaminants from the NPR site. The modeling indicates that the maximum pumpage to be used, 1000 gpm, will induce only minor drawdown across SRS. Pumpage of this magnitude will have a limited effect on the upward gradient from the Cretaceous into the Tertiary near Upper Three Runs Creek. Potentiometric surface maps generated from modeled results indicate that horizontal flow in the water table is either towards Four Mile Creek to the north or to Pen Branch on the south. Particle tracking analysis indicates that the primary flow paths are vertical into the Lower Tertiary Zone, with very little lateral migration. Total travel times from the NPR site to the edge of the model (approximately 3 miles) is on the order of 50 years. The flow …

The Department of Energy (DOE) and the Commission of the European Communities (CEC) have been exploring the possibility of parallel studies on the externals costs of employing fuel cycles to deliver energy services. These studies are of particular importance following the activities of the US National Energy Strategy (NES), where the potential discrepancies between market prices and the social costs of energy services were raised as significant policy concerns. To respond to these concerns, Oak Ridge National Laboratory (ORNL) and Resources for the Future (RFF) have begun a collaborative effort for the DOE to investigate the external costs, or externalities, generated by cradle to grave fuel cycle activities. Upon initiating this project, the CEC expressed an interest to the DOE that Europe should conduct a parallel study and that the two studies should be highly coordinated for consistency in the results. This series of meetings with members of the CEC was undertaken to resolve some issues implied by pursuing parallel, coordinated studies; issues that were previously defined by the August meetings. In addition, it was an opportunity for some members of the US research team and the DOE sponsor to meet with their European counterparts for the study, as well …

A project for the US Department of Energy, entitled Incorporation of an organic acid representation into MAGIC (Model of Acidification of Groundwater in Catchments) and Testing of the Revised Model UsingIndependent Data Sources'' was initiated by E S Environmental Chemistry, Inc. in March, 1992. Major components of the project include: improving the MAGIC model by incorporating a rigorous organic acid representation, based on empirical data and geochemical considerations, and testing the revised model using data from paleolimnological hindcasts of preindustrial chemistry for 33 Adirondack Mountain lakes, and the results of whole-catchment artificial acidification projects in Maine and Norway. The ongoing research in this project involves development of an organic acid representation to be incorporated into the MAGIC modeland testing of the improved model using three independent data sources. The research during Year 1 has included conducting two workshops to agree on an approach for the organic acid modeling, developing the organic subroutine and incorporating it into MAGIC (Task 1), conducing MAGIC hindcasts for Adirondack lakes and comparing the results with paleolimnological reconstructions (Task 2), and conducting site visits to the manipulation project sites in Maine and Norway. The purpose of this report is to provide a summary of the work …

Under the Phase II, Alternative Energy Resources Development (AERD) project of the United States Agency for International Development (USAID) and the Government of India (GOI), five collaborative coal projects have been initiated in the areas of: (1) NO{sub x}/SO{sub x} control from coal-fired power plants, (2) slagging combustor development for high-ash Indian coals, (3) characterization of Indian coals for combustion and gasification. (4) diagnostic studies for prediction of power plant life expectancy, and (5) environmental and natural resource analysis of coal cycle. The Pittsburgh Energy Technology Center (PETC) has the implementation responsibility for these projects. The Indian collaborative institutions identified for these projects are the Bharat Heavy Electricals Ltd. (BHEL), Trichy, (projects 1--4), and the Tata Energy Research Institute (TERI) for project 5. The Oak Ridge National Laboratory (ORNL) is providing cross-cut technical coordination and support for these five projects.

The theory of radiation emitted by a charged particle with spin in relativistic motion in an external magnetic field is reviewed. Approximate expressions suitable numerical computation, in far and near field, are derived. In particular, the case of the passage of a particle accelerator beam through an undulator is considered. It is shown that observation of the spectrum of the emitted radiation, in its two states of polarization, can be used not only for beam diagnostics, but also to measure the spin state of the accelerated particles. Undulator radiation is compared with Compton scattering of laser light by the particle beam. Examples for high energy electron and proton colliders are presented.

None

The objectives of this project are to study the effect of pretreatment methods on the two-stage liquefaction process. In particular, the effects of dispersed catalysts and carbon monoxide atmospheres on a coal liquefaction process. The project is divided into three technical tasks. Task 1 and 2 deal with the analyses and liquefaction experiments, respectively, whereas Task 3 deals with the economic impact of utilizing the pretreatment methods. This quarter we concentrated on Tasks 1 and 2, which are summarized below. Samples of Black Thunder Subbituminous coal and the corresponding recycle solvent were received from Wilsonville. These particular samples were obtained from run [number sign]263. The samples were analyzed for a proximate and ultimate analysis, as well as heat content. We have also received samples of the iron oxide used in the Wilsonville coal liquefaction runs as well as Shell 324 and molyVanL for use in future runs. Base-line screening experiments were conducted in 300 mL autoclaves using 2.5 parts by weight of recycle solvent to 1 part Black Thunder coal at 425[degree]C for one hour. In preliminary results for the comparison of iron oxide and iron carbonyl, the iron carbonyl appears to give higher yields to soluble products.

This document is being prepared to document that a No Further Action Decision (NFAD) document is appropriate for the Hg-1 site at Shemya Air Force Base (AFB), Alaska, under the Air Force Installation Restoration Program (IRP). The IRP is a Department of Defense (DOD) program established to identify and remediate hazardous waste problems on DOD property that result from past practices. The Alaska Department of Environmental Conservation (ADEC) draft document [open quotes]No Further Action Criteria for DOD Military/FUD Sites[close quotes] has been used as a guide in preparing this document. Air Force personnel have stated that the Hg-1 site may have been used to store mercury and PCB-contaminated material. The site was added to the IRP in 1987, and later that year a field investigation was conducted at the site. Soil samples were collected and analyzed for mercury, EP toxicity, polychlorinated biphenyls (PCBs), and dioxin. All concentrations of contaminants found in Area Hg-1 are below regulatory action levels for PCBs (40 CFR 761) and mercury (55 FR 30798) or below detection levels for dioxin/furans. Therefore, leaving these soils in place is acceptable.

The field of Resonance Ionization Spectroscopy grew out of work done in the Photophysics Group at Oak Ridge National Laboratory. As one of the original developers of this field the traveler has continued to attend this meeting on a regular basis. The traveler was originally asked to present an invited talk and to present part of a short course offered to graduate students attending the conference. Subsequently, the traveler was also asked to chair a session and to be a judge of the students papers entered in a contest for a $1000 first prize.