The Linear Free Electron Laser is numerically analyzed in the one dimensional limit by following an average (resonant) particle. Several different wiggler schemes are presented, and electron beam current density requirements are discussed. A variable phase angle buncher is also proposed.

Numerical analysis tools are used to characterize the fields reradiated by cultural scatterers like powerlines, pipelines and fences. These fields are then compared to the returns expected from deeply buried targets and suggestions are made for methods to identify and remove cultural noise from survey data.

Development of a computer system for access to distributed genome mapping data is continuing. This effort is to develop software which accesses multiple databases and retrieves data which contain information useful for accelerating mapping human chromosomes. For example, the molecular sequence databases (GenBank, EMBL Data Library, PIR, SwissProt) which contain data required for the development of oligonucleotides for probing DNA as well as for extracting data for primer pair development for PCR-based methods. It is also to develop software which qualitatively integrates the following mapping data: (1) markers regionally localized using cytogenetic methods, (2) polymorphic markers ordered by genetic linkage analysis, (3) clones ordered by various finger-printing'' methods, (4) fragments ordered by long-range restriction mapping, (5) single genomic fragments or clones that have STSs assigned to them, (6) nucleotide sequences, (7) the associated metadata such as the submitting investigator's name, location, etc; the source organism; the chromosome the element is from; the chromosomal location is whatever detail is available.

This letter serves as the post-closure monitoring letter report for the above Corrective Action Unit (CAU) for calendar year 2006. CAU 91 is inspected every six months. The first inspection was conducted on March 23, 2006, and the second inspection was conducted on September 19, 2006. All access roads, fences, gates, and signs were in excellent condition. No settling, cracking, or erosion was observed on the cover, and the use restriction had been maintained. No issues were identified, and no corrective actions were needed. The post-closure inspection checklists for CAU 91 are attached. Photographs and fields notes taken during site inspections are maintained in the project files.

The assured limit of detection (LOD), where 100% of the PCR assays are successful, for the Qiagen spin column is dramatically improved when combined with an ethanol precipitation step of the eluted sample. A detailed SOP for the ethanol precipitation was delivered as a separate report. A key finding in the precipitation work was to incubate the ethanol precipitation at -20{sup o}C overnight when concentrating low copy number samples. Combining this modified ethanol precipitation with the Qiagen spin columns, the limit of assured detection was improved by 1-2 orders of magnitude, for the aliquot and assay variables used. The lower limit of detection (defined as when at least 1 assay of 1 aliquot was positive) was only improved by approximately 1 order of magnitude. The packed bed process has the potential of a 20-fold improvement in the limit of detection compared to Qiagen plus precipitation, based on a mass balance analysis for the entire DNA concentration and purification processes. Figure ES1 shows a mass balance for all the DNA processing steps. The packed bed process minimizes losses from elution, precipitation, and pipetting (aliquoting and transferring). Figure ES1 assumes that 100 copies of DNA serve as the input sample. Efficiencies for …

At the request of the Defense Logistics Agency, the Oak Ridge Institute for Science and Education conducted radiological scoping surveys of the Scotia Depot during the period of September 24 through 27, 2007. The scoping survey included visual inspections and limited radiological surveys performed in accordance with area classification that included surface scans, total and removable activity measurements, and soil sampling.

The purpose ofthis document is to describe research, monitoring, and evaluation (RME) for the Federal Columbia River Estuary Program. The intent of this RME effort is to provide data and information to evaluate progress toward meeting program goals and objectives and support decision-making in the Estuary Program. The goal of the Estuary Program is to understand, conserve, and restore the estuary ecosystem to improve the performance of listed salmonid populations. The Estuary Program has five general objectives, designed to fulfill the program goal, as follows. 1. Understand the primary stressors affecting ecosystem controlling factors, such as ocean conditions and invasive species. 2. Conserve and restore factors controlling ecosystem structures and processes, such as hydrodynamics and water quality. 3. Increase the quantity and quality of ecosystem structures, i.e., habitats, juvenile salmonids use during migration through the estuary. 4. Maintain the food web to benefit salmonid performance. 5. Improve salmonid performance in terms of life history diversity, foraging success, growth, and survival. The goal of estuary RME is to provide pertinent and timely research and monitoring information to planners, implementers, and managers of the Estuary Program. In conclusion, the estuary RME effort is designed to meet the research and monitoring needs of …

The objective of this work is to develop a solid scientific understanding of the creation and characteristics of surface fractures formed during the grinding and polishing of brittle materials, specifically glass. In this study, we have experimentally characterized the morphology, number density, and depth distribution of various surface cracks as a function of various grinding and polishing processes (blanchard, fixed abrasive grinding, loose abrasive, pitch polishing and pad polishing). Also, the effects of load, abrasive particle (size, distribution, foreign particles, geometry, velocity), and lap material (pitch, pad) were examined. The resulting data were evaluated in terms of indentation fracture mechanics and tribological interactions (science of interacting surfaces) leading to several models to explain crack distribution behavior of ground surfaces and to explain the characteristics of scratches formed during polishing. This project has greatly advanced the scientific knowledge of microscopic mechanical damage occurring during grinding and polishing and has been of general interest. This knowledge-base has also enabled the design and optimization of surface finishing processes to create optical surfaces with far superior laser damage resistance. There are five major areas of scientific progress as a result of this LDRD. They are listed in Figure 1 and described briefly in this …

The VACET team would like to add visual spreadsheeting capability to the visualization tool VisIt, to make it be a viable tool for current users of AMRVis and ChomboVis. This document describes AMRVis and ChomboVis approaches to visual spreadsheets and describes a proposed visual spreadsheet mechanism for VisIt.

SRNL was tasked to provide an assessment of the downstream impacts (or lack thereof) to DWPF of decisions regarding the implementation of Al-dissolution to support sludge mass reduction and processing. Based on future sludge batch compositional projections, assessments have been made with respect to the ability to maintain comparable projected operating windows for sludges with high temperature Al-dissolution and without Al-dissolution. In general, paper study assessments indicated that most of the future sludge batches (twelve with and fourteen without high temperature Al-dissolution) had multiple frits available that yielded relatively large operating windows. The projected operating windows were defined by the waste loading (WL) interval over which glasses were classified as acceptable based on current process control models and their related constraints. Although multiple frits were identified, using a 17-point width as a general guide for a reasonable operating window (e.g., 25-41% WL), there generally appeared to be more flexibility in frit selection for the without Al-dissolution flowsheets. This larger frit compositional platform could allow frit development efforts to make more significant adjustments to melt rate. However, based on the general observations of the paper study, there is essentially no clear distinction between the two options with which to drive a …

The advanced Large-Area Plastic Scintillator (ALPS) Project at Pacific Northwest National Laboratory investigated possible technological avenues for substantially advancing the state-of-the-art in gamma-ray detection via large-area plastic scintillators. The three predominant themes of these investigations comprised the following: * Maximizing light collection efficiency from a single large-area sheet of plastic scintillator, and optimizing hardware event trigger definition to retain detection efficiency while exploiting the power of coincidence to suppress single-PMT "dark current" background; * Utilizing anti-Compton vetoing and supplementary spectral information from a co-located secondary, or "Back" detector, to both (1) minimize Compton background in the low-energy portion of the "Front" scintillator's pulse-height spectrum, and (2) sharpen the statistical accuracy of the front detector's low-energy response prediction as impelmented in suitable energy-windowing algorithms; and * Investigating alternative materials to enhance the intrinsic gamma-ray detection efficiency of plastic-based sensors.

On November 9, 2002, the U.S. Environmental Protection Agency, the U.S. Department of Energy, and the Idaho Department of Environmental Quality approved the 'Record of Decision Experimental Breeder Reactor-I/Boiling Water Reactor Experiment Area and Miscellaneous Sites', which required a Site-wide institutional controls plan for the then Idaho National Engineering and Environmental Laboratory (now known as the Idaho National Laboratory). This document, first issued in June 2004, fulfilled that requirement. This revision identifies and consolidates the institutional controls and operations and maintenance requirements into a single document.

We report on the development, fabrication and characterization of microcantilever based uncooled focal plane array (FPA) for infrared imaging. By combining a streamlined design of microcantilever thermal transducers with a highly efficient optical readout, we minimized the fabrication complexity while achieving a competitive level of imaging performance. The microcantilever FPAs were fabricated using a straightforward fabrication process that involved only three photolithographic steps (i.e. three masks). A designed and constructed prototype of an IR imager employed a simple optical readout based on a noncoherent low-power light source. The main figures of merit of the IR imager were found to be comparable to those of uncooled MEMS infrared detectors with substantially higher degree of fabrication complexity. In particular, the NETD and the response time of the implemented MEMS IR detector were measured to be as low as 0.5K and 6 ms, respectively. The potential of the implemented designs can also be concluded from the fact that the constructed prototype enabled IR imaging of close to room temperature objects without the use of any advanced data processing. The most unique and practically valuable feature of the implemented FPAs, however, is their scalability to high resolution formats, such as 2000 x 2000, without …

Fiber-reinforced polymer (FRP) piping has been identified as a leading candidate for use in a transport system for the Hydrogen Economy. Understanding the permeation and leakage of hydrogen through the candidate materials is vital to effective materials system selection or design and development of safe and efficient materials for this application. A survey of the literature showed that little data on hydrogen permeation are available and no mechanistically-based models to quantitatively predict permeation behavior have been developed. However, several qualitative trends in gaseous permeation have been identified and simple calculations have been performed to identify leakage rates for polymers of varying crystallinity. Additionally, no plausible mechanism was found for the degradation of polymeric materials in the presence of pure hydrogen. The absence of anticipated degradation is due to lack of interactions between hydrogen and FRP and very low solubility coefficients of hydrogen in polymeric materials. Recommendations are made to address research and testing needs to support successful materials development and use of FRP materials for hydrogen transport and distribution.

We propose to build and deploy a 10-kg dual-phase argon ionization detector for the detection of coherent neutrino-nucleus scattering, which is described by the reaction; {nu} + (Z,N) {yields} {nu} + (Z,N), where {nu} is the scattering neutrino, and (Z,N) is the target nucleus of atomic number Z and neutron number N. Its detection would validate central tenets of the Standard Model. We have built a gas-phase argon ionization detector to determine the feasibility of measuring the small recoil energies ({approx} 1keV) predicted from coherent neutrino scattering, and to characterize the recoil spectrum of the argon nuclei induced by scattering from medium-energy neutrons. We present calibrations made with 55-Fe, a low-energy X-ray source, and report on measurements to date of the recoil spectra from the 2-MeV LINAC Li-target neutron source at LLNL. A high signal-to-noise measurement of the recoil spectrum will not only serve as an important milestone in achieving the sensitivity necessary for measuring coherent neutrino-nucleus scattering, but will break new scientific ground on its own.

Deposition velocity is a parameter used in atmospheric transport models to specify the amount an atmospheric constituent transferred from the atmosphere to the surface of the earth. The material may deposit on the surface of soil, water, or vegetation. The deposition may be the result of rainfall or diffusion. A method for the calculation of deposition velocity based upon the decrease in deposition with distance from a point source is presented. The method does not require a knowledge of the time over which the deposition occurs or the concentration of the material in the atmosphere. However, the method does assume the deposition rate is proportional to the air concentration. The sensitivity to errors resulting from certain errors in the measurements and from violation of some of the assumptions of the model underlining the calculations are also to be discussed. The method has been used to estimate the deposition velocity of I-129. Two sets of I-129 deposition data at various distances from the center of SRS were used in the calculations. The results indicate that the deposition velocity is near a value of 0.2 cm/s. This is consistent with the processes that are known to control iodine deposition.

This report gives a self-consistent conceptual design for the final focusing'' beam optics and analysis spectrometer optics for the Grating Acceleration Experiment, the Inverse Cerenkov Acceleration Experiment, and the Nonlinear Compton Scattering Experiment. The introductory section describes the basic principles and constraints involved in the overall design. The next two sections give second order TRANSPORT calculations for the final focus system and the spectrometer system for the three experiments. The fourth section presents Monte Carlo simulations of the expected x-y distributions for the spectrometer detector for the three experiments. Appendices A and B contains further details about the assumptions used in the Monte Carlo simulations. Appendix C contains the working drawings used for determining distances on the experimental floor.

A General Purpose Heat Source (GPHS) has been designed for the purpose of supplying power to a radioisotope thermal generator intended for interplanetary missions. The baseline configuration, nominally 2 in. x 4 in. x 4 in. with sharp edges and corners, is required to survive accidental earth reentry as well as terminal impact velocities. Several problems have been identified relative to survival criteria during reentry. This paper is concerned with the flow field and reentry heating for a broad face-on or side-on reentry orientation. Moreover, the analysis considers convective heat transfer in the absence of roughness or ablation effects during the supersonic/hypersonic regime of reentry. The anaytical results are compared with wind tunnel data. From these studies it was concluded that heat transfer distributions for non-circular shapes ca be obtained for reentry conditions using wind tunnel data for the surface distributions and a stagnation value based on a reference sphere condition. The distributions obtained at a fixed Mach number (M > 1) appear valid over an extended range of Mach numbers. The above required definition of a proper velocity gradient, and definition of an area aspect ratio. Flowfield predictions (inviscid) using the CM2DT program provide a proper definition of pressure …

Detailed estimates shown for the respective states are based largely on existing contracts and grants which are assumed to continue in 1980. Some DOE programs cannot be identified at the contractor level, and some elements of programs cannot be identified by states. These are listed in an Undesignated category. FY 1979 estimates are given; it is felt that Congressional actions on the FY 1980 budgets may affect the estimates shown.

On January 12, 1953, an explosion occurred in the Savannah River pilot plant which has been used since November, 1951 by du Pont personnel to train operators and to test equipment for their new Purex production plant. The explosion occurred in an evaporator in which a uranyl nitrate solution containing some organics was being concentrated to a high degree to remove nitric acid. This memorandum reviews the facts surrounding the incident as obtained from the official Preliminary Technical Report'', and by talking to du Pont personnel. These facts are interpreted as fast as possible and the current design for the Hanford Purex production plant is re-evaluated in the light of these data.

The SCC radiation field is higher than that encountered by previous hadron collider detectors. In particular, the electromagnetic (EM) calorimeter compartment sees the highest radiation dose. Since an EM calorimeter also makes the most precise energy measurement, special care must be lavished on this part of a calorimeter. Previous studies have concentrated on Monte Carlo examinations of 2 longitudinal compartments within the EM which can alleviate radiation damage. Recently, it was realized that a ``shower maximum`` detector, such as exists in CDF, also contains information of the conversion point of an electromagnetic shower. As such, it can potentially be used in a fashion analogous to the longitudinal compartments, although it is not designed to be optimized for this role.

An unplanned release of tritiated water occurred at K reactor on SRS between 22-December and 25-December 1991. This water moved down through the effluent canal, Pen Branch, Steel Creek and finally to the Savannah River. Samples were collected in the Savannah River and associated waterways over a period of a month. The Environmental Technology Section (ETS) of the Savannah River Laboratory performed liquid scintillation analyses to monitor the passage of the tritiated water from SRS to the Atlantic Ocean.

The program focuses on materials research and development, fabrication process development, cell/stack performance testing and characterization, cost and system analysis, and quality development.

Purpose of this supplement is to increase the maximum allowable liquid level in the near downcomer for single downcomer operation. The required clearance between the downcomer lid and liquid level is reduced from 24 inches to 18 inches in the near downcomer, providing bulk outlet temperature is maintained less than 93 C.