The halogenated aliphatic hydrocarbon trichlorofluoromethane has been widely used as a refrigerant and aerosol propellant.

Melt-quenched NdFeB is an important modern permanent magnet material. However there still remains doubt as to the magnetization reversal mechanism which controls coercivity in material prepared by this processing route. To investigate this problem a new technique based on measurements of reversible magnetization along recoil curves has been used. The technique identifies the presence of free domain walls during magnetic reversal. For this study samples of isotropic (MQI), hot pressed (MQII) and die upset (MQIII) melt-quenched NdFeB were examined. The results indicate that in MQI free domain walls are not present during reversal and the reversal mechanism is most likely incoherent rotation of some form. Free domain walls are also not present during reversal in the majority of grains of MQII, even though initial magnetization measurements indicate that the grain size is large enough to support them. In MQIII free domain walls are present during reversal. These results are attributed to the reduced domain wall nucleation field in MQIII compared with MQII and the increased dipolar interactions in MQIII.

In this paper some of the results of a recent computer search [CoLy99] for optimal three- and four-dimensional lattice rules of specified trigonometric degree are discussed. The theory is presented in a general frame emphasizing the special nature of lattice rules among the rules of specified trigonometric degree.

An investigation of the synthesis of novel dodecaarylporphyrins using the Suzuki coupling reaction of arylboronic acids with octabromotetraarylporphyrins is reported. Studies of the dynamic properties of these new porphyrins using variable temperature (VT) <SUP>1</SUP>H NMR spectroscopy and molecular mechanics provide interesting insights into their dynamic properties, including the first determination of {beta} aryl rotation in a porphyrin system.

Colossal magnetoresistive (CMR) manganites display a spectacular range of structural, magnetic, and electronic phases as a function of hole concentration, temperature, magnetic field, etc. A1though the bulk of research has concentrated on the 3-D perovskite manganites, the ability to study anisotropic magnetic and electronic interactions made available in reduced dimensions has accelerated interest in the layered Ruddlesden-Popper (R-P) phases of the manganite class. The quest for understanding the coupling among lattice, spin, and electronic degrees of freedom (and dimensionality) is driven by the availability of high quality materials. In this talk, the authors will present recent results on synthesis and magnetic properties of layered manganites from the La{sub 2{minus}2x}Sr{sub 1+2x}Mn{sub 2}O{sub 7} series in the Mn{sup 4+}-rich regime x &gt;0.5. This region of the composition diagram is populated by antiferromagnetic structures that evolve from the A-type layered order to G-type ''rocksalt'' order as x increases. Between these two regimes is a wide region (0.7 &lt; x &lt; 0.9) where an incommensurate magnetic structure is observed. The IC structure joins spin canting and phase separation as a mode for mixed-valent manganites to accommodate FM/AF competition. Transport in these materials is dominated by highly insulating behavior, although a region close to x …

The authors present the Sequential Access Model (SAM), which is the data handling system for D0, one of two primary High Energy Experiments at Fermilab. During the next several years, the D0 experiment will store a total of about 1 PByte of data, including raw detector data and data processed at various levels. The design of SAM is not specific to the D0 experiment and carries few assumptions about the underlying mass storage level; its ideas are applicable to any sequential data access. By definition, in the sequential access mode a user application needs to process a stream of data, by accessing each data unit exactly once, the order of data units in the stream being irrelevant. The units of data are laid out sequentially in files. The adopted model allows for significant optimizations of system performance, decrease of user file latency and increase of overall throughput. In particular, caching is done with the knowledge of all the files needed in the near future, defined as all the files of the already running or submitted jobs. The bulk of the data is stored in files on tape in the mass storage system (MSS) called Enstore[2] and also developed at Fermilab. …

In this work, uniaxial tensile testing of a 63Sn-37Pb alloy with different specimen sizes and aging conditions had been carried out. Although the stress-strain responses of different specimen sizes and aging conditions differs, the ultimate strength of the specimens with 16 hours, 100 C aging are similar for the sizes tested. The specimens with 25 days, 100 C aging have different stress-strain response with different sizes, and have a lower ultimate strength and higher failure strain compared to 16 hours, 100 C aging specimens.

An operational evaluation of the Integrated Solar Upper Stage (ISUS) power management and distribution (PMAD) system was conducted as part of the Engine Ground Demonstration thermionic power system test program-- START-3. START-3 testing took place at the Baikal Test Stand, located in the University of New Mexico's Energy Conversion Research Laboratory at the New Mexico Engineering Research Institute in Albuquerque, NM. One objective of this test was to evaluate the operational performance of the lSUS PMAD system developed by the National Aeronautics and Space Administration (NASA) Lewis Research Center. Tests of the PMAD with the ISUS diode string demonstrated that the PMAD could regulate the output of an array of thermionic converters within the design requirements and couId be modified to optimize performance for diode strings of fewer than 16 diodes.

None

This seminar is another excellent opportunity for those involved in preventing chemical weapons production and use to learn from each other about how the Chemical Weapons Convention (CWC) can become a foundation of arms control in Africa and around the world. The author is grateful to the staff of the Organization for the Prohibition of Chemical Weapons (OPCW) for inviting him to address this distinguished seminar. The views expressed in this paper are those of the authors alone, and do not represent the position of the government of the US nor or of any other institution. In 1993, as the process of CWC ratification was beginning, concerns arose that the complexity of integrating the treaty with national law would cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States Parties in how the Convention would be carried out. As a result the Manual for National Implementation of the Chemical Weapons Convention was prepared and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Manual was reviewed by the Committee of Legal Experts on National Implementation of the …

There are applications of high-voltage, energy-storage, capacitors where it is desirable that the energy storage capability can be reliably and predictably negated in abnormal environments such as fire. This property serves as a safety feature to prevent events of unintended consequence. The present paper describes studies of the thermal response characteristics of a cylindrically wound, discrete Mylar film/foil capacitor design. The experimental setups that simulate fires will be presented. Three different heat input geometries were employed: uniform radial input, spot radial input, and axial input. Heat input was controlled via feedback system to maintain specific temperature ramp rates. Both capacitor voltage and current were monitored during the thermal excursion to ascertain the failure temperature, i.e. when the capacitor permanently shorts. Temperature of failure data is presented for the three heat input cases along with a statistical analysis of the results and application implications. The physics of failure will be described in terms of the thermal/mechanical properties of the Mylar.

This paper applies plane parallel radiance transport techniques to scattering from vegetation. The leaves, stems, and branches are represented as a volume density of scattering surfaces, depending only on height and the vertical component of the surface normal. Ordinary differential equations are written for the multiply scattered radiance as a function of the height above the ground, with the sky radiance and ground reflectance as boundary conditions. They are solved using a two-pass integration scheme to unify the two-point boundary conditions, and Fourier series for the dependence on the azimuthal angle. The resulting radiance distribution is used to precompute diffuse and specular `ambient` shading tables, as a function of height and surface normal, to be used in rendering, together with a z-buffer shadow algorithm for direct solar illumination.

This paper provides an overview of the Worker Protection System (WPS), a client/server, Windows-based database management system for essential radiological protection and industrial hygiene. Seven operational modules handle records for external dosimetry, bioassay/internal dosimetry, sealed sources, routine radiological surveys, lasers, workplace exposure, and respirators. WPS utilizes the latest hardware and software technologies to provide ready electronic access to a consolidated source of worker protection.

Injection of high power, multi-mode laser profiles into a fiber optic delivery system requires controlling a number of injection parameters to maximize throughput and minimize concerns for optical damage both at the entrance and exit faces of the fiber optic. A simple method for simultaneously achieving a compact fiber injection geometry and control of these injection parameters, independent of the input source characteristics, is provided by a refractive lenslet array and simple injection lens configuration. Design criteria together with analytical and experimental results for the refractive lenslet array and short focal length injection lens are presented. This arrangement provides a uniform spatial intensity distribution at the fiber injection plane to a large degree independent of the source mode structure, spatial profile, divergence, size, and/or alignment to the injection system. This technique has application to a number of laser systems where uniform illumination of a target or remote delivery of high peak power is desired.

A number of questions remain concerning homogeneous aerosol formation by natural organics interacting with anthropogenic pollutants. For example, chlorine has been proposed as a potential oxidant in the troposphere because of its very high reactivity with a wide range of organics (Finlayson-Pitts, 1993). Indeed, sea salt aerosol in the presence of ozone has been shown to produce chlorine atoms in heterogeneous photochemical reactions under laboratory conditions. Whether chlorine can initiate oxidation of natural organics such as monoterpene hydrocarbons and can generate homogeneous nucleation or condensable material that contributes to aerosol loadings needs to be assessed. The nighttime reactions of ozone and nitrate radical can also result in monoterpene reactions that contribute to aerosol mass. We are currently planning field studies in Puerto Rico to assess these aerosol issues and other atmospheric chemistry questions. Puerto Rico has a number of key features that make it very attractive for a field study of this sort. The principal feature is the island's very regular meteorology and its position in the Caribbean Sea relative to the easterly trade winds. This meteorology and the island's rectangular shape (100 x 35 miles) make it highly suitable for simplification of boundary layer conditions. In addition, the long …

Efficient (1.2% yield) multikilovolt x-ray emission from Ba(L) (2.4--2.8{angstrom}) and Gd(L) (1.7--2.1{angstrom}) is produced by ultraviolet (248nm) laser-excited BaF{sub 2} and Gd solids. The high efficiency is attributed to an inner shell-selective collisional electron ejection. Much effort has been expended recently in attempts to develop an efficient coherent x-ray source suitable for high-resolution biological imaging. To this end, many experiments have been performed studying the x-ray emissions from high-Z materials under intense (&gt;10{sup 18}W/cm{sup 2}) irradiation, with the most promising results coming from the irradiation of Xe clusters with a UV (248nm) laser at intensities of 10{sup 18}--10{sup 19}W/cm{sup 2}. In this paper the authors report the production of prompt x-rays with energies in excess of 5keV with efficiencies on the order of 1% as a result of intense irradiation of BaF{sub 2} and Gd targets with a terawatt 248nm laser. The efficiency is attributed to an inner shell-selective collisional electron ejection mechanism in which the previously photoionized electrons are ponderomotively driven into an ion while retaining a portion of their atomic phase and symmetry. This partial coherence of the laser-driven electrons has a pronounced effect on the collisional cross-section for the electron ion interaction.

In 1991, US and Polish officials signed a Memorandum of Understanding formally initiating and directing the Cracow Clean Fossil Fuels and Energy Efficiency Program. Developing a program approach for the most effective use of the available funds required considerable effort on the part of all project participants. The team recognized early that the cost of solving the low emissions problem even in only one city far exceeded the amount of available US funds. Economic conditions in Poland limited availability of local capital funds for environmental projects. Imposing environmental costs on struggling companies or city residents under difficult conditions of the early 1990's required careful consideration of the economic and political impacts. For all of these reasons the program sought to identify technologies for achieving air quality goals which, through improved efficiency and/or reduced fuel cost, could be so attractive economically as to lead to self-sustaining activities beyond the end of the formal project. The effort under this program has been focused into 5 main areas of interest as follows: (1) Energy Conservation and Extension of Central Station District Heating; (2) Replacement of Coal- and Coke-Fired Boilers with Natural Gas-Fired Boilers; (3) Replacement of Coal-Fired Home Stoves with Electric Heating Appliances; …

High charge states, up to fully stripped {sup 11}C and {sup 14}O ion, beams have been produced with the electron cyclotron resonance ion sources (LBNL, ECR and AECR-U) at Lawrence Berkeley National Laboratory. The radioactive atoms of {sup 11}C and {sup 14}O were collected in batch mode with an LN{sub 2} trap and then bled into the ECR ion sources. Ionization efficiency as high as 11% for {sup 11}C{sup 4+} was achieved.

A review is given of the prospects for future colliders and collider physics at the energy frontier. A proof-of-plausibility scenario is presented for maximizing the authors progress in elementary particle physics by extending the energy reach of hadron and lepton colliders as quickly and economically as might be technically and financially feasible. The scenario comprises 5 colliders beyond the LHC--one each of e{sup +}e{sup {minus}} and hadron colliders and three {mu}{sup +}{mu}{sup {minus}} colliders--and is able to hold to the historical rate of progress in the log-energy reach of hadron and lepton colliders, reaching the 1 PeV constituent mass scale by the early 2040's. The technical and fiscal requirements for the feasibility of the scenario are assessed and relevant long-term R and D projects are identified. Considerations of both cost and logistics seem to strongly favor housing most or all of the colliders in the scenario in a new world high energy physics laboratory.

The reaction between H{sub 2}CO and O{sub 2} has been studied in a reflected shock tube apparatus between 1633--2027 K using trioxane, (H{sub 2}CO){sub 3}, as the source of H{sub 2}CO. O-atom atomic resonance absorption spectrometry (ARAS) was used to observe absolute [O]{sub t} under conditions of low [H{sub 2}CO]{sub 0} so that most secondary reactions were negligible. Hence, the observed [O]{sub t} was the direct result of the rate controlling reaction between H{sub 2}CO and O{sub 2}. Ab initio theoretical results indicated that the process, H{sub 2}CO + O{sub 2} {yields} HCO + HO{sub 2}, is the only possible reaction. After rapid HCO and HO{sub 2} dissociations, O-atoms are then instantaneously produced from H + O{sub 2} {yields} O + OH. Using the ab initio result, variational transition state theoretical calculations (CTST) give k{sub 1} = 4.4929 x 10{sup {minus}20} T{sup 2.9116} exp{minus}18692/T cm{sup 3} molecule{sup {minus}1} S{sup {minus}1}. This theoretical result is consistent with the present experimental determinations and those at lower temperatures.

Backfills have been part of Sandia National Laboratories' [Sandia's] Waste Isolation Pilot Plant [WIPP] designs for over twenty years. Historically, backfill research at Sandia has depended heavily on the changing mission of the WIPP facility. Early testing considered heat producing, high level, wastes. Bentonite/sand/salt mixtures were evaluated and studies focused on developing materials that would retard brine ingress, sorb radionuclides, and withstand elevated temperatures. The present-day backfill consists of pure MgO [magnesium oxide] in a pelletized form and is directed at treating the relatively low contamination level, non-heat producing, wastes actually being disposed of in the WIPP. Its introduction was motivated by the need to scavenging CO{sub 2} [carbon dioxide] from decaying organic components in the waste. However, other benefits, such as a substantial desiccating capacity, are also being evaluated. The MgO backfill also fulfills a statutory requirement for assurance measures beyond those needed to demonstrate compliance with the US Environmental Protection Agency [EPA] regulatory release limits. However, even without a backfill, the WIPP repository design still operates within EPA regulatory release limits.

A process model was used to better understand the controls on the chemical evolution of drainage in a historic mining district. At the Pecos Mine Operable Unit, New Mexico, drainage near the waste rock pile is acidic (pH varies from 3.0--5.0) and carries high concentrations of Zn, Al, Cu and Pb. As drainage flows toward the Pecos River, pH increases to greater than 7 and heavy metal content decreases. A process model of natural attenuation in this drainage shows the main controls on pH are reaction with a local bedrock that contains limestone, and concurrent mixing with tributary streams. Models that account for both calcite dissolution and mixing reproduce the observed decrease in aqueous metal concentrations with increasing pH. Contaminant concentrations attenuate primarily via two distinct pathways: Al, Cu, Fe and Pb precipitate directly from solution, whereas Zn, Mg, Mn and SO{sub 4} concentrations decrease primarily through dilution. Additionally, Pb adsorbs to precipitating hydroxide surfaces.

None

The Photovoltaic Manufacturing Research and Development project is a government/industry partnership between the U.S. Department of Energy and members of the U.S. photovoltaic (PV) industry. The purpose of the project is to work with industry to improve manufacturing processes, reduce manufacturing costs, and improve the performance of PV products. This project is conducted through phased solicitations with industry participants selected through a competitive evaluation process. Starting in 1995, the two most recent solicitations include manufacturing improvements for balance-of-system (BOS) components, energy storage, and PV system design improvements. This paper surveys the work accomplished since that time, as well as BOS work currently in progress in the PV Manufacturing R&amp;D project to identify areas of continued interest and product trends. Industry participants continue to work to improve inverters and to expand the features and capabilities of this key component. The industry also continues to advance fully integrated systems that meet standards for performance and safety. All participants included manufacturing improvements to reduce costs and improve reliability. Accomplishments of the project's participants are summarized to illustrate the product and manufacturing trends.