A report is given of a search for tau decays of the W boson in p{bar p} collisions at {radical}s = 1.8 TeV using the Collider Detector at Fermilab (CDF). A description of a hardware trigger specifically designed to enhance the number of events with tau decays is presented along with the results of a preliminary analysis of data taken during the 1988--89 run of CDF. 10 refs., 4 figs.

Synchrotron radiation (SR) methods have been utilized with increasing frequency over the past several years to study topics in actinide science, ranging from those of a fundamental nature to those that address a specifically-targeted technical need. In particular, the emergence of microspectroscopic and fluorescence-based techniques have permitted investigations of actinide materials at sources of soft x-ray SR. Spectroscopic techniques with fluorescence-based detection are useful for actinide investigations since they are sensitive to small amounts of material and the information sampling depth may be varied. These characteristics also serve to simplify both sample preparation and safety considerations. Examples of investigations using these fluorescence techniques will be described along with their results, as well as the prospects for future investigations utilizing these methodologies.

Nucleic acid aptamers have found steadily increased utility and application steadily over the last decade. In particular, aptamers have been touted as a valuable complement to and in some cases replacement for antibodies due to their structural and functional robustness as well as their ease in generation and synthesis. They are thus attractive for biosecurity applications, e.g. pathogen detection, and are especially well suited since their in vitro generation process does not require infection of any host systems. Herein we provide a brief overview of the aptamers generated against biopathogens over the last few years. In addition, a few recently described detection platforms using aptamers (aptasensors) and potentially suitable for biosecurity applications will be discussed.

This manuscript discusses the multilayer coating results for the primary and secondary mirrors of the Micro Exposure Tool (MET): a 0.30-numerical aperture (NA) lithographic imaging system with 200 x 600 {micro}m{sup 2} field of view at the wafer plane, operating in the extreme ultraviolet (EUV) wavelength region. Mo/Si multilayers were deposited by DC-magnetron sputtering on large-area, curved MET camera substrates, and a velocity modulation technique was implemented to consistently achieve multilayer thickness profiles with added figure errors below 0.1 nm rms to achieve sub-diffraction-limited performance. This work represents the first experimental demonstration of sub-diffraction-limited multilayer coatings for high-NA EUV imaging systems.

Cylinders and rings fabricated from AerMet{reg_sign} 100 alloy and AISI 1018 steel have been explosively driven to fragmentation in order to determine the fracture strains for these materials under plane strain and uniaxial stress conditions. The phenomena associated with the dynamic expansion and subsequent break up of the cylinders are monitored with high-speed diagnostics. In addition, complementary experiments are performed in which fragments from the explosively driven cylinder are recovered and analyzed to determine the statistical distribution associated with the fragmentation process as well as to determine failure mechanisms. The data are used to determine relevant coefficients for the Johnson-Cook (Hancock-McKenzie) fracture model. Metallurgical analysis of the fragments provides information on damage and failure mechanisms.

None

We present a first principle investigation of the electronicstructure and the band gap bowing parameter of zinc-blende \AlGaN usingboth local density approximation and screened-exchange density functionalmethod. The calculated sX-LDA band gaps for GaN and AlN are 95 percentand 90 percent of the experimentally observed values, respectively, whileLDA under estimates the gaps to 62 percent and 70 percent. In contrast tothe gap itself, the band gap bowing parameter is found to be very similarin sX-LDA and LDA. Because of the difference in the conduction bandstructure, the direct to indirect band gap crossover is predicted tooccur at different Al concentration.

The Gardner and van Genuchten models of relativepermeability are widely used in analytical and numerical solutions toflow problems. However, the applicab ility of the Gardner model to realproblems is usually limited, because empirical relative permeability datato calibrate the model are not routinely available. In contrast, vanGenuchten parameters can be estimated using more routinely availablematric potential and saturation data. However, the van Genuchten model isnot amenable to analytical solutions. In this paper, we introducegeneralized conversion formulae that reconcile these two models. Ingeneral, we find that the Gardner parameter alpha G is related to the vanGenuchten parameters alpha vG and n by alpha G=alpha vG ~; 1:3 n. Thisconversion rule will allow direct recasting of Gardner-based analyticalsolutions in the van Genuchten parameter space. The validity of theproposed formulae was tested by comparing the predicted relativepermeability of various porous media with measured values.

In multisection laser diodes, the amplitude or frequency modulation (AM or FM) efficiency can be improved using the gain lever effect. To study gain lever, InGaAs double quantum well (DQW) edge emitting lasers have been fabricated with integrated passive waveguides and dual sections providing a range of split ratios from 1:1 to 9:1. Both the electrical and the optical gain lever have been examined. An electrical gain lever with greater than 7 dB enhancement of AM efficiency was achieved within the range of appropriate DC biasing currents, but this gain dropped rapidly outside this range. We observed a 4 dB gain in the optical AM efficiency under non-ideal biasing conditions. This value agreed with the measured gain for the electrical AM efficiency under similar conditions. We also examined the gain lever effect under large signal modulation for digital logic switching applications. To get a useful gain lever for optical gain quenched logic, a long control section is needed to preserve the gain lever strength and a long interaction length between the input optical signal and the lasing field of the diode must be provided. The gain lever parameter space has been fully characterized and validated against numerical simulations of a …

Isopiestic vapor-pressure measurements were made for Li{sub 2}SO{sub 4}(aq) from 0.1069 to 2.8190 mol {center_dot} kg{sup -1} at 298.15 K, and from 0.1148 to 2.7969 mol {center_dot} kg{sup -1} at 323.15 K, with NaCl(aq) as the reference standard. Published thermodynamic data for this system were reviewed, recalculated for consistency, and critically assessed. The present results and the more reliable published results were used to evaluate the parameters of an extended version of Pitzer's ion-interaction model with an ionic-strength dependent third virial coefficient, as well as those of the standard Pitzer model, for the osmotic and activity coefficients at both temperatures. Published enthalpies of dilution at 298.15 K were also analyzed to yield the parameters of the ion-interaction models for the relative apparent molar enthalpies of dilution. The resulting models at 298.15 K are valid to the saturated solution molality of the thermodynamically stable phase Li{sub 2}SO{sub 4} {center_dot} H{sub 2}O(cr). Solubilities of Li{sub 2}SO{sub 4} {center_dot} H{sub 2}O(cr) at 298.15 K were assessed, and the selected value of m(sat.) = 3.13 {+-} 0.04 mol {center_dot} kg{sup -1} was used to evaluate the thermodynamic solubility product K{sub s}(Li{sub 2}SO{sub 4} {center_dot} H{sub 2}O, cr, 298.15 K) = (2.62 {+-} 0.19) and …

High-Z metals constitute a particular challenge for large-scale ab initio calculations, as they require high resolution due to the presence of strongly localized states and require many eigenstates to be computed due to the large number of electrons and need to accurately resolve the Fermi surface. Here, we report recent findings on high-Z materials, using an efficient massively parallel planewave implementation on some of the largest computational architectures currently available. We discuss the particular architectures employed and methodological advances required to harness them effectively. We present a pair-correlation function for U, calculated using quantum molecular dynamics, and discuss relaxations of Pu atoms in the vicinity of defects in aged and alloyed Pu. We find that the self-irradiation associated with aging has a negligible effect on the compressibility of Pu relative to other factors such as alloying.

Surface-enhanced Raman scattering is a powerful tool for the investigation of biological samples. Following a brief introduction to Raman and surface-enhanced Raman scattering, several examples of biophotonic applications of SERS are discussed. The concept of nanoparticle based sensors using SERS is introduced and the development of these sensors is discussed.

The preliminary results of an ongoing investigation of Fe/Cu(001) are presented here. Energy dependent photoelectron diffraction, including the spin-dependent variant using the multiplet split Fe3s state, is being used to investigate the nanoscale structures formed by near-monolayer deposits of Fe onto Cu(001). Core-level photoemission from the Fe3p and Fe3s states has been generated using synchrotron radiation as the tunable excitation source. Tentatively, a comparison of the experimental Fe3p cross section measurements with multiple scattering calculations indicates that the Fe is in a fourfold hollow site with a spacing of 3.6{Angstrom} between it and the atom directly beneath it, in the third layer. This is consistent with an FCC structure. The possibility of utilizing spin-dependent photoelectron diffraction to investigate magnetic ultrathin films will be demonstrated, using our preliminary spectra of the multiplet-split Fe3s os near-monolayer Fe/Cu(001). 18 refs., 10 figs.

Placing an upper bound on reservoir compaction requires placing a lower bound on the reservoir effective compaction modulus. Porosity-depth data can be used to find that lower-bound modulus in a young sedimentary basin. Well-log and sample porosity data from a geothermal field in the Imperial Valley, CA, give a lower-bound modulus of 7.7 x 10{sup 3} psi. This modulus is used with pressure drops calculated for a reservoir to determine an upper bound on reservoir compaction. The effects of partial reinjection and aquifer leakage on upper-bound subsidence estimated from the compaction are illustrated for a hypothetical reservoir and well array.

Although the overall aim of radiobiology is to understand the biological effects of radiation, it also has the implied practical purpose of developing rational measures for the control of radiation exposure in man. The emphasis in this presentation is to show that the enormous effort expended over the years to develop quantitative dose-effect relationships in biochemical and cellular systems, animals, and human beings now seems to be paying off. The pieces appear to be falling into place, and a framework is evolving to utilize these data. Specifically, quantitative risk assessments will be discussed in terms of the cellular, animal, and human data on which they are based; their use in the development of radiation protection standards; and their present and potential impact and meaning in relation to the quantity dose equivalent and its special unit, the rem.

Fundamental aspects of Z physics are reviewed with an emphasis on e/sup +/e/sup /minus// annihilation. The effects of radiative corrections, both from ordinary QED and from the electroweak interactions are considered from an elementary point of view, but in some detail. The possibility of mixing with an extra Z boson is discussed. The implications for experiments are stressed. Additional information that will be obtained from measurements of the W in collider experiments is considered. 18 refs., 20 figs., 3 tabs.

Plasmas produced by irradiating massive carbon targets with a 1.064 {mu}m, 1.5 ns laser pulse at incident energies of {approximately}100 J have been investigated. UV thermal Thomson scattering was used to obtain the electron and ion temperatures, as well as drift velocities. The electron density was obtained by optical interferometry. The results are compared to hydrodynamic computer modeling. 6 refs., 6 figs.

Computer modeling of wave propagation in porous rock has several important applications. Among them are prediction of fragmentation and permeability changes to be caused by chemical explosions used for in situ resource recovery, and the understanding of nuclear explosion effects such as seismic wave generation, containment, and site hardness. Of interest in all these applications are the distance from the source to which inelastic effects persist and the amount of porosity change within the inelastic region. In order to study phenomena related to these applications, the Cam Clay family of models developed at Cambridge University was used to develop a similar model that is applicable to wave propagation in porous rock. That model was incorporated into a finite-difference wave propagation computer code SOC. 10 figures, 1 table. (RWR)

Recent advances in field and laboratory methods for measuring elastic wave velocities provide incentive and opportunity for improving interpretation of geophysical data for engineering and environmental applications. Advancing the state-of-the-art of seismic imaging requires developing petrophysical relationships between measured velocities and the hydrogeology parameters and lithology. Our approach uses laboratory data and rock physics methods. Compressional (Vp) and shear (Vs) wave velocities, Vp/Vs ratios, and relative wave amplitudes show systematic changes related to composition, saturation, applied stress (analogous to depth), and distribution of clay for laboratory ultrasonic measurements on soils. The artificial soils were mixtures of Ottawa sand and a second phase, either Wyoming bentonite or peat moss used to represent clay or organic components found in natural soils. Compressional and shear wave velocities were measured for dry, saturated, and partially-saturated conditions, for applied stresses between about 7 and 100 kPa, representing approximately the top 5 m of the subsurface. Analysis of the results using rock physics methods shows the link between microstructure and wave propagation, and implications for future advances in seismic data interpretation. For example, we found that Vp in dry sand-clay mixtures initially increases as clay cements the sand grains and fills porosity, but then Vp decreases …

We report the preparation of a novel monolithic SnO{sub 2} aerogel using a straightforward sol-gel technique. TEM and XRD analysis show that the as-prepared material is comprised of interconnected, randomly oriented crystalline (rutile) SnO{sub 2} nanoparticles {approx}3-5 nm in size. As a result, the low-density SnO{sub 2} monolith ({approx}97% porous) exhibits a very high surface area of 383 m{sup 2}/g. /XANES spectroscopy at the Sn M{sub 4,5} edge reveals that the electronic structure of the SnO{sub 2} aerogel is similar to that of tetragonal SnO rather than SnO{sub 2} or {beta}-Sn, and that the undercoordinated surface atoms in the material introduce additional Sn-related electronic states close to the conduction band minimum.

In June of 2011 we held six two-day workshops called "XDL-2011: Science at the Hard X-ray Diffraction Limit". The six workshops covered (1) Diffraction-based imaging techniques, (2) Biomolecular structure from non-crystalline materials, (3) Ultra-fast science, (4) High-pressure science, (5) Materials research with nano-beams and (6) X-ray photon correlation spectroscopy (XPCS), In each workshop, invited speaker from around the world presented examples of novel experiments that require a CW, diffraction-limited source. During the workshop, each invited speaker provided a one-page description of the experiment and an illustrative graphic. The experiments identified by the workshops demonstrate the broad and deep scientific case for a CW coherent synchrotron x-ray source. The next step is to perform detailed simulations of the best of these ideas to test them quantitatively and to guide detailed x-ray beam-line designs. These designs are the first step toward developing detailed facility designs and cost estimates.

Experimental results for the selective removal of strontium and cesium from simulated waste solutions with monosodium titanate and crystalline silicotitanate laden filter cartridges are presented. In these proof-of-principle tests, effective uptake of both strontium-85 and cesium-137 were observed using ion-exchangers in this filter cartridge configuration. At low salt simulant conditions, the instantaneous decontamination factor for strontium-85 with monosodium titanate impregnated filter membrane cartridges measured 26, representing 96% strontium-85 removal efficiency. On the other hand, the strontium-85 instantaneous decontamination factor with co-sintered active monosodium titanate cartridges measured 40 or 98% Sr-85 removal efficiency. Strontium-85 removal with the monosodium titanate impregnated membrane cartridges and crystalline silicotitanate impregnated membrane cartridges, placed in series arrangement, produced an instantaneous decontamination factor of 41 compared to an instantaneous decontamination factor of 368 for strontium-85 with co-sintered active monosodium titanate cartridges and co-sintered active crystalline silicotitanate cartridges placed in series. Overall, polyethylene co-sintered active titanates cartridges performed as well as titanate impregnated filter membrane cartridges in the uptake of strontium. At low ionic strength conditions, there was a significant uptake of cesium-137 with co-sintered crystalline silicotitanate cartridges. Tests results with crystalline silicotitanate impregnated membrane cartridges for cesium-137 decontamination are currently being re-evaluated. Based on these preliminary findings …

None

The Digital Imaging and Remote Sensing Laboratory (DIRS) at the Rochester Institute of Technology, along with the Savannah River National Laboratory is investigating passive methods to quantify vehicle loading. The research described in this paper investigates multiple vehicle indicators including brake temperature, tire temperature, engine temperature, acceleration and deceleration rates, engine acoustics, suspension response, tire deformation and vibrational response. Our investigation into these variables includes building and implementing a sensing system for data collection as well as multiple full-scale vehicle tests. The sensing system includes; infrared video cameras, triaxial accelerometers, microphones, video cameras and thermocouples. The full scale testing includes both a medium size dump truck and a tractor-trailer truck on closed courses with loads spanning the full range of the vehicle's capacity. Statistical analysis of the collected data is used to determine the effectiveness of each of the indicators for characterizing the weight of a vehicle. The final sensing system will monitor multiple load indicators and combine the results to achieve a more accurate measurement than any of the indicators could provide alone.