For fully noninductive current drive in tokamaks using neutral beams, there is a power and density threshold condition, setting a minimum value for P{sup 3/2}/n{sup 2}. If this condition is not met, stationary state cannot occur, and a tokamak discharge will collapse. This is a consequence of the coupling between current and electron temperature, or between current drive efficiency and energy confinement time. 4 figs.

A special task force was appointed to study the experience with the present beamline control system at Fermilab and to make recommendations in this area. The charge of the committee and the list of its members are appended. In order to carry out its assignment, the committee conducted a series of meetings in which it discussed the controls situation in general and the best way to approach the user community. The various groups of users were identified, and a letter was written to representatives of these groups asking questions concerning the present system and future needs. The committee met with each group to discuss the response to these questions. Written summaries of the discussions are appended. Conclusions are drawn regarding current problems, systematic upgrades and specific recommendations. (LEW)

Substantial increases in the high-temperature creep strength of Mo-Hf alloys can be obtained by internal nitriding. The creep resistance of internally nitrided Mo-1.86 wt % Hf is more than 100 times greater than that of other commercially available molybdenum-base alloys. The HfN precipitates appear to be stable over long times at temperatures near 1600 K. Internally nitrided Mo-Hf alloys appear to be good candidates for fabrication of components of space power systems where the ratio of high-temperature strength to weight is important. They are particularly good candidates for components that can be fabricated from the lower-strength unnitrided alloy and subsequently nitrided to provide high-temperature strength.

While significant progress has been made in the development of neutral beams for the heating and sustaining of plasmas in large fusion experiments, the control of such devices has largely been a matter of hardware interlocks and operator experience. The need for computer-assisted control becomes more evident, however, with the initiation of multi-beamline experiments. This paper describes a software system that incorporates simple mathematical models coupled to Kalman filters for control of the high power (6 to 8 MW) beams currently under development at Lawrence Berkeley Laboratory's Neutral Beam Engineering Test Facility. Among the principal features of the system are: reduction of a large number of operator variables to just a few (usually one or two); the ability to describe most of the major neutral beams in use and under development; a foundation resting on statistical data analysis and control system principles rather than rules-of-thumb.

The Computing and Communications Division at the Los Alamos National Laboratory has designed and is building a parallel microprocessor system (PuPS) to serve as a research tool for evaluating parallel processing of large-scale scientific codes. PuPS is an experimental architecture consisting of an orthogonal array of 20 processing elements by 32 memory elements, establishing a tightly coupled, shared-memory (16-Mbyte) machine. The hardware incorporates VLSI components, such as 16-bit microprocessors, floating-point co-processors, and dynamic random access memories. The design replaces conventional MSI/SSI circuitry with programmable array logic, logic sequencers, and logic arrays. This experimental system, which is only 1 element of the parallel processing research being done by the Laboratory's Computing and Communications Division, will enable direct comparisons of speedups of algorithms for a variety of multiprocessor architectures.

It has long been known that a precise measurement of the SLC beam trajectory through the IP region is vital both from a machine and a detector point of view. One of the primary techniques used to maximize luminosity is the measurement of the deflection angle of one beam produced by the electromagnetic interaction with the other beam. In order to implement this procedure a pair of precision Beam Position Monitors (BPMs) were installed within the Final Triplet of quadrapoles on each side of the IP. Before the IP BPMs could be used to measure beam-beam deflection, a series of measurements were made of the coefficients which relate the setting of an orbit correction magnet to the position of the beam at a particular BPM (R/sub 12/s). The purpose was to expose any problems such as misconnected cables, etc., by comparing the measured R/sub 12/s with theoretical predictions from the model of the Final Focus region. A technique developed that uses position measurements in the long BPMs to determine a three parameter fit to the beam trajectory at the IP. The three parameters in the fit are the beam position, the incoming angle and the deflection angle. The result was …

The client submitted 5 sets of porcelain and stoneware subsurface (radioactive site) marker prototypes (31 markers each set). The following were determined: compressive strength, thermal shock resistance, thermal crazing resistance, alkali resistance, color retention, and chemical resistance.

Contained in the National Defense Authorization Act for FY 1988-89 (H.R. 1748, Section 3133), is a requirement for the President to conduct a study on the nuclear weapons complex for the purpose of determining the overall size and productive capacity necessary to meet national security objectives. Based on the study, the President is directed to formulate a plan to modernize the nuclear weapons complex including actions necessary to ensure operation of facilities in a safe and environmentally acceptable manner; a schedule for implementation of the plan; and the estimated costs of implementation of the plan. The Act calls for submission of a Report to the appropriate committees of the Congress including recommendations resulting from the Study and a description of the Plan. The report is to be submitted by February 15, 1988. In contrast to the Bill, the Committee report on H.R. 1748, Section 3133, calls for both a Study and a Plan to be submitted one year later than the aforementioned report, and puts much greater stress on recommendations concerning the capability of the weapons complex to be operated in a safe and environmentally acceptable manner. Thus, the Report will be submitted by President Reagan and the Study and …

AMAX Research & Development Center (AMAX R&D) has been investigating methods for enhancing the reactivity and durability of the zinc ferrite desulfurization sorbent. Zinc ferrite sorbents are intended for use in desulfurization of hot coal gas in integrated gasification combined cycle (IGCC) or molten carbonate fuel cell (MCFC) applications. For the present program, the reactivity of the sorbent may be defined as its sulfur sorption capacity at the breakthrough point and at saturation in a bench-scale, fixed-bed reactor. Durability may be defined as the ability of the sorbent to maintain important physical characteristics such as size, strength, and specific surface area during 10 cycles of sulfidation and oxidation.

AMAX Research & Development Center (AMAX R&D) has been investigating methods for enhancing the reactivity and durability of the zinc ferrite desulfurization sorbent. Zinc ferrite sorbents are intended for use in desulfurization of hot coal gas in integrated gasification combined cycle (IGCC) or molten carbonate fuel cell (MCFC) applications. For the present program, the reactivity of the sorbent may be defined as its sulfur sorption capacity at the breakthrough point and at saturation in a bench-scale, fixed-bed reactor. Durability may be defined as the ability of the sorbent to maintain important physical characteristics such As size, strength, and specific surface area during 10 cycles of sulfidation and oxidation.

This report describes recent progress and plans for calendar year 1987 in the Johns Hopkins University program to develop and improve spectroscopic diagnostics for the high temperature plasmas used in magnetic fusion research. An EUV spectrograph which provides time resolved spectra along fifteen chords of a plasma device has been completed and evaluation on DIII-D will began in late 1986. Other instrumentation work includes the evaluation of a sensitive detector for ion temperature/velocity distribution determinations and a feasibility study of Zeeman polarimetry for determining magnetic fields. A comprehensive data set taken on the TEXT tokamak is undergoing analysis as a means of improving the ionic parameters used in diagnostic studies and to expand the capabilities of existing instruments. Potential new advanced in spectroscopic technology are being monitored to determine if they provide advantages for fusion research.

For a number of years the MORSE user community has requested additional help in setting up problems using various options. The sample problems distributed with MORSE did not fully demonstrate the capability of the code. At Oak Ridge National Laboratory the code originators had a complete set of sample problems, but funds for documenting and distributing them were never available. Recently the number of requests for listings of input data and results for running some particular option the user was trying to implement has increased to the point where it is not feasible to handle them on an individual basis. Consequently it was decided to package a set of sample problems which illustrates more adequately how to run MORSE. This write-up may be added to Part III of the MORSE report. These sample problems include a combined neutron-gamma case, a neutron only case, a gamma only case, an adjoint case, a fission case, a time-dependent fission case, the collision density case, an XCHEKR run and a PICTUR run.

A series of viewgraphs is provided that summarize and illustrate some of the physics aspects and design issues of free electron lasers. Physics aspects include the coupling between electrons and light, electron beam properties that affect the free electron laser, and tapering of the wiggler. Design issues include focusing and mismatched electron orbit, as well as diffraction. Modelling of the free electron laser and scaling are also mentioned. (LEW)

A self-consistent design is described for a large tandem mirror experiment (MFTF-B) proposed to be constructed at the Lawrence Livermore Laboratory. Neutral-beam injected yin-yang mirror cells at each end of a 40 meter long central cell, provide MHD stability for the configuration, as in the TMX experiment. The largest potential well confining center-cell ions is generated by ECRH in auxiliary mirror cells (A-cells) added beyond the outer yin-yang mirrors. The required ECRH power (less than or equal to 1 MW) is minimized by use of thermal barriers installed at the local midplanes of each A-cell. In addition, the trapping of cold ions (n cold approx. n hot) in the local potential dips at the A-cell midplanes stabilize loss cone microstabilities. The impact of constraints imposed by neoclassical radial transport (resonant drifts), MHD stability (ballooning modes), and microstability (ion two-stream and loss cone modes) on the overall design will be assessed for the benefit of improving designs in future tandem mirror devices.

A key requirement setting the minimum electric propulsion performance (specific power ..cap alpha../sub e/ = kW/sub e//kg) for manned missions to Mars is the maximum allowable radiation dose to the crew during the long transits between Earth and Mars. Penetrating galactic cosmic rays and secondary neutron showers give about 0.1-rem/day dose, which only massive shielding (e.g., a meter of concrete) can reduce significantly. With a humane allowance for cabin space, the shielding mass becomes so large that it prohibitively escalates the propellant consumption required for reasonable trip times. This paper covers various proposed methods for using reactor power to propel spacecraft. 7 refs., 6 figs., 1 tab.

The purpose of the ICRH start-up antenna on MFTF-B is to heat the plasma and control the ion distribution as the density increases during start-up. The antenna, consisting of two center fed half turn loops phased 180/sup 0/ apart, has been designed for 1 MW of input power, with a goal of coupling 400 kW into the ions. To vary the heating frequency relative to the local ion cyclotron frequency, the antenna is tunable over a range from 7.5 to 12.5 MHz. The thermal requirements common to low duty cycle ICRH antennas are especially severe for the MFTF-B antenna. The stress requirements are also unique, deriving from the possibility of seismic activity or JxB forces if the magnets unexpectedly quench. Considerable attention has been paid to contact control at high current bolt-up joints, and arranging geometries so as to minimize the possibility of voltage breakdown.

The purpose of this note is to specify parameters for hypothetical SSC water cooling systems, in order that the comparative advantages of these system can be studied. The various methods of heat rejection considered include: cooling towers, cooling ponds, ground water recharge system, water-to-air (dry) cooling towers, use of tunnel sump water, or some combination.

Exploratory hole UE7nS was drilled to a depth of 672.1 m in East-Central Yucca Flat, Nevada Test Site, as part of a program sponsored by the Nuclear Monitoring Office (NMO) of the Advanced Research Projects Agency (ARPA). The purpose of the program is to determine the geologic and geophysical characteristics of selected locations that have demonstrated anomalous seismic signals. The purpose for drilling UE7nS was to provide the aforementioned data for emplacement site U7n. This report presents lithologic and stratigraphic descriptions, geophysical logs, physical properties, and water table measurements. An analysis of these data has been made and a set of recommended values is presented.

In linear accelerators the maximum achievable beam current is often limited by the Beam Breakup (BBU) instability. This instability arises from the interaction of a transversely displaced beam with the dipole modes of the acceleration cavities. The modes of interest have non-zero transverse magnetic fields at the center of the cavity. This oscillating field imparts a time varying transverse impulse to the beam as it passes through the accelerating gap. Of the various modes possible only the TM/sub 130/ mode has been observed on the Experimental Test Accelerator (ETA) and it is expected to surface on the Advanced Test Accelerator (ATA). The amplitude of the instability depends sensitively on two cavity parameters; Q and Z/sub perpendicular//Q. Q is the well-known qualtiy factor which characterizes the damping rate of an oscillator. Z/sub perpendicular//Q is a measure of how well the beam couples to the cavity fields of the mode and in turn, how the fields act back on the beam. Lowering the values of both these parameters reduces BBU growth.

None

Some 12 components of a valid study of the competitive economics of a newly ordered nuclear power plant are identified and explicated. These are then used to adjust the original cost projections of four authoritative studies of nuclear and coal power economics.

Aqueous suspensions of charged polymer latex particles exhibit several forms of ordered structure, the particular form depending on the size, number density and charge of the latex particles, and on the ionic strength of the aqueous medium. At low ionic strength, the inter-particle potential may become sufficiently long-ranged to generate crystalline order, which usually shows bcc symmetry at low density and becomes fcc above about 3% volume fraction of latex in the system. As the ionic strength increases, the crystalline structure melts, and ordered liquid structures develop. This paper reviews some of the recent small-angle neutron scattering experiments on polymer latex suspensions, in the light of new theoretical methods which permit in situ analysis of the particle size and charge. The discussion also encompasses new experimental methods for studying latex structures under dynamic shear conditions.

Measurements of neutron spectra produced by the Los Alamos National Laboratory (LANL) Little Boy replica assembly (Comet) were made with a combined multisphere and liquid scintillator system, that has been widely used at the Lawrence Livermore National Laboratory. The combined system was used for measurements at the side (90/sup 0/) and nose (0/sup 0/) of the assembly; additional measurements were made at 45/sup 0/ using only the liquid scintillator. Data were obtained at two meters from the center of the reactive region of the assembly, with good agreement between the multisphere and scintillator results. Comparison with liquid scintillator measurements performed by experimenters from the Canadian Defence Research Establishment, Ottawa (DREO) and calculations from LANL depended on the specific angle, obtaining the best agreement at 90/sup 0/. 32 references, 11 figures, 4 tables.

An automatic on line sewage effluent monitoring system has been developed. A representative fraction of the total waste stream leaving the site is monitored for pH, radiation, and metals as it passes through a detection assembly. This assembly consists of an industrial pH probe, NaI radiation detectors, and an x-ray fluorescence metal detector. A microprocessor collects, reduces and analyzes the data to determine if the levels are acceptable by established environmental limits. Currently, if preset levels are exceeded, a sample of the suspect sewage is automatically collected for further analysis, and an alarm is sent to a station where personnel can be alerted to respond on a 24-hour basis. Since at least four hours pass before LLNL effluent reaches the treatment plant, sufficient time is available to alert emergency personnel, evaluate the situation, and if necessary arrange for diversion of the material to emergency holding basins at the treatment plant. Information on the current system is presented, and progress is reported in developing an on-line tritium monitor as an addition to the assembly.