Report presenting the drag of a series of complete airplane-like configurations and their components at transonic velocities using the free-fall method. The configuration tested in this report has a 45 degree sweptback wing of aspect ratio 4.1 mounted forward of the maximum diameter of a 10-inch-diameter body of fineness ratio 12 equipped with stabilizing tail fins. Results are presented as curves showing the variation of drag coefficient with Mach number for the complete configuration and for each component.

Report presenting an investigation using a 4600 pound-thrust turbojet engine as part of a program to determine the comparative performance of fuels conforming to specifications AN-F-58 and AN-F-32. Results regarding the altitude performance, altitude low-speed blow-out limits, idling limits of fuel-metering control, altitude windmilling starts, carbon-deposition rates, and iron oxide contamination are provided.

Memorandum presenting an approximate method for the estimation of the properties of the incompressible laminar boundary layer on a flat plate in the slip-flow region using Karman's momentum method. At equivalent stations, the total thickness and the skin friction of a slipping boundary layer are less than that of the normal boundary layer at the same Reynolds number.

Report discussing testing using two rocket-propelled models to test the jettisonable-nose method of pilot escape. The nose was jettisoned successfully on the second attempt and the accelerations produced were found to be within human tolerance. The first test ended with a collision of the nose and wing, indicating that this is a possible risk during power-on flight.

Report presenting a wind tunnel investigation to determine the downwash angles, dynamic pressure loss, and wake width behind wings with sweep angles of 45, 30, and 0 degrees. Results indicated that the spanwise distribution of downwash was affected by sweep in a manner similar to span loading, increased toward the root by sweepforward and toward the tip by sweepback.

Report presenting an investigation to determine the benefits obtainable by applying boundary-layer control to a 45 degree swept-forward wing-fuselage combination. Force and pressure-distribution data were obtained with and without boundary-layer control with various combinations of leading-edge and trailing-edge flaps.

Tests were made in the Langley 7 by 10 foot tunnel on a model of a fighter-type airplane with external stores. The data obtained is presented and compared to flight-test results to determine the feasibility of estimating flight buffet Mach number from tunnel data.

Report presenting the aerodynamic characteristics of an all-movable, triangular-plan-form wing alone and with a body as determined from semispan model tests. The agreement between calculated and experimental results was not satisfactory for the most part, which seemed to be due to the failure of linear theory to define the actual flow field about the configurations investigated. Results regarding lift characteristics, drag characteristics, and pitching-moment characteristics are provided.

Report presenting a survey of two-dimensional data on trim changes near maximum lift resulting from deflection of various types of leading-edge and trialing-edge high lift devices. Results regarding pitching-moment coefficients, pitching-moment increments, and maximum lift coefficients are provided.

An altitude-wind-tunnel investigation of the performance of AN-F-58 and AN-F-32 fuels in an experimental turbojet engine was conducted over a range of simulated altitudes and flight Mach numbers. Combustion efficiencies obtained with AN-F-58 and AN-F-32 fuels were approximately equal. The minimum-speed altitude operational limit was essentially the same with either AN-F-58 or AN-F-32 fuel. Starting characteristics of the two fuels were approximately the same at low wind milling speeds. Visual observation showed no apparent differences in the carbon-deposition rates of AN-F-58 and AN-F-32 fuels.

Report presenting wind-tunnel testing of submerged air inlets on the fuselage of a scale model of a typical fighter-type airplane. The results are presented for ramp plan forms with parallel and with diverging walls and show the effect of the duct-entrance location, internal ducting efficiency, and deflectors.

Memorandum presenting wind-tunnel tests of a semispan model of an unswept wing of aspect ratio 4 and taper ratio 0.5 at Mach numbers up to 0.94 to determine its aerodynamic characteristics as influenced by Mach number, Reynolds number, and modification of the basic diamond profile by rounding the ridge. Lift, drag, and pitching-moment data are presented for a range of Reynolds and Mach numbers. The results indicated that no severe static-longitudinal-stability problems up to Mach number 0.94.

Report presenting testing of low-aspect-ratio triangular-plan-form lifting surfaces located on conical and cylindrical portions of a body have been determined at Mach number 1.2 and several subsonic speeds to determine if the aerodynamic characteristics of these surfaces at supersonic speeds could be improved by locating them in the subsonic conical-flow field. Results regarding lift and drag coefficients and lift-curve slopes are provided.

Memorandum presenting the results of measurements of gust and draft velocities within thunderstorms at a selected air field over a 5-day period. They are also compared to previous flights.

High-temperature tensile and thermal-shock investigations were conducted on beryllium oxide and beryllium oxide plus columbium metal additions. X-ray diffraction and metallographic results are given. The tensile strength of 6150 pounds per square inch for beryllium oxide at 1800 degrees F compared favorably with the zirconia bodies previously tested. Additions of 2, 5, 8, 10, 12, and 15 percent by weight of columbium metal failed to improve the shock resistance over that of pure beryllium oxide.

From Introduction: "The Ames Aeronautical Laboratory has in progress an experimental investigation of the aerodynamic characteristics of wings of interest in the design of high-speed fighter aircraft. This program included an investigation in the Ames 6-by 6-foot supersonic wind tunnel at both subsonic and supersonic Mach numbers of a wing-body combination having a 3-percent-thick, unswept, tapered wing with circular-arc sections and an aspect ratio of 3.1 (reference 1).

"The rocket-propelled-model technique has been applied to the investigation of low-lift buffeting. Results of preliminary tests show that severe buffeting, wing dropping, and normal-force changes occur almost simultaneously near zero lift over a Mach number range near 0.9 on unswept wings 12 percent thick. On unswept wings 7 percent thick, buffeting did not occur; however, mild wing dropping and normal-force changes were experienced" (p. 1).

Report presenting an investigation of an air-cooled internal-strut-supported blade in a modified production turbojet engine to determine the cooling effectiveness of this type of blade and the cooling-air pressure loss through the blade under engine operating conditions. Experimental results are presented and compared with the results of an analytical investigation.

Report that is part of a program to investigate the aerodynamic characteristics in pitch, yaw, and steady roll of various model configurations with variations in the wing geometric parameters. The paper presents the aerodynamic characteristics in pitch of wing-fuselage combinations with wings of aspect ratio 4, taper ratio of 0.6, and sweep angles varying from 3.6 degrees to 60 degrees. Results regarding lift characteristics, pitching-moment characteristics, drag characteristics, and lift-drag ratios are provided.

A heat-transfer investigation was conducted with air in an electrically heated platinum tube with long-approach entrance, inside diameter of 0.525 inch, and effective heat-transfer length of 24 inches over ranges of Reynolds number up to 320,000, average inside-tube-wall temperature up to 3053 degrees R, and inlet-air temperature up to 1165 degrees R. Correlation of data by the conventional Nusselt relation resulted in separation of data with tube-wall temperature. Good correlation was obtained, however, by use of a modified Reynolds number.

Report presenting an investigation at supersonic speeds of some of the factors affecting the flow over a rectangular wing with a symmetrical circular-arc section and a 30-percent-chord trailing-edge flap. The main purpose is to obtain more information on which to base the design of supersonic controls. Results regarding the effect of Mach number, effect of wing thickness, effect of fixing transition, effect of sealing the hinge gap, effect of model surface condition and asymmetry, and shock boundary-layer interaction are provided.

Report presenting an investigation in the supersonic tunnel at Mach number 1.85 and angles of attack from 0 to 5 degrees to determine optimum design configurations for a convergent-divergent type of supersonic diffusers with a subsonic diffuser of 5 degrees included divergence angle. Total-pressure recoveries in excess of the theoretical recovery across a normal shock at a free-stream Mach number of 1.85 were obtained with a number of configurations.

Report presenting an investigation to determine the effects of several design changes on the performance of large-capacity, double-entry, centrifugal compressors. Four modifications of a turbojet engine compressor were operated over a range of equivalent impeller tip speeds an the compressor overall and component performances were determined. Results regarding the impeller performance, diffuser performance, and compressor performance are provided.

From Introduction: "The investigation reported herein was therefore undertaken to extend this study to altitude conditions in which the low fuel-flow rates occur over the full range of engine speeds."