The first series tests in the KER-REP-1 loop proved that a fisssion product contaminated loop could be decontaminated to a safe level for contact maintenance. The second series of tests ere scheduled for a more thorough evaluation of these processes includes specific decontamination factors, process corrosion rates, loop activity reduction factors (loop decontamination factors), and any preferential decontamination which may be present.

Aluminum nitrate solutions are used as salting agents in the redox process and frequently in organic-aqueous extractions in the laboratory. Determination of specific gravity is a convenient means of estimating the concentration of such solutions. However, where an aluminum nitrate solution has been prepared by dissolving aluminum hydrate in nitric acid, the ratio of nitrate to aluminum may intentionally be other than stoichiometric, the solutions being described as acid, neutral, or acid deficient.

The following is an attempt to explain the method by which the precision associated with an observed volume reading in a process vessel (E-12, C-1) should be calculated based upon a regression analysis of cumulative data. There are two types of volume measurement consists of estimating the total volume in a vessel at some inventory time. A transfer measurement consists of estimating the volume between two levels within a tank.

This report summarizes the research and development work carried out during March, April and May, 1959, for Budget Activity 2790 - Separations Development for Non-Production Reactors, The effort on Activity 2790 will enable Hanford to begin reprocessing in January, 1962, the fuel elements from power reactors which employ depleted or slightly enriched uranium fuels.

The Single Tube Prototype Mockup (STPM) was constructed to be used as a tool to evaluate the mechanical problems involved in operating and maintaining many components of the Plutonium Recycle Test Reactor (PRTR). This report has been written to acquaint interested HAPO components with the capability of the STPM and for use as an aid in scheduling tests and/or to properly evaluate testing results obtained from the mockup.

This work was initiated as an evaluation of the application pf rubber finger ring dosimeters to the control of extremity radiation exposure. The use of film dosimeters is a well known general practice throughout the radiation protection profession, however, film radiation exposure measurements associated with plutonium metal handling present a unique problem. The practical measurement of extremity dose depends upon the accuracy and reproducibility of results under the most severe conditions using a dosimeter of minimum size of the radiation exposure to the hands in the rubber finger ring.

When following the performance of automatic and semi-automatic equipment that is left unattended for extended periods of time, it is often desirable to be able to check this equipment by remote means. A convenient vehicle for such a check is the telephone since nearly all locations have or can have a telephone extension installed. The check of the equipment may be made as simple or extensive as desired, with the outcome of the check represented by a relay condition, for example. The condition of the relay is then transmitted to the interrogator over the telephone line by means of the presence or absence of a tone.