A major problem encountered in the Manhattan Project was the protection of workers against damage resulting from acute or chronic exposure to external radiation. The problem of how to detect evidence of damage following exposure to total body radiation led to this study. These studies were conducted between January, 1942 and November, 1945. Three groups of persons were employed in this study. The first group of eight individuals harboring incurable neoplasms which was not extensive enough to influence general health, these patients were treated with 400 KV x-radiation while sitting in a wooden chair, doses were 27, 60, and 120r. Three persons having generalized illnesses chronic in nature were given total body radiation using 200 KV X-rays in multiple exposures totaling 100, 300, and 500r. A third group of normal volunteers from personnel of the Metallurgical Laboratory were treated with 200 KV x-rays in three divided doses totaling 21 r. Changes in peripheral blood in the fourteen individuals is reported. In group 1 the most persistent abnormality noted was a diminution in the number of lymphocytes after completion of the treatment. In group 2 a depression in the lymphocytes was also the most marked single change. In group 3 no …

We provide a practical and effective method for solving constrained optimization problems by successively training a multilayer feedforward neural network in a coupled neural-network/objective-function representation. Nonlinear programming problems are easily mapped into this representation which has a simpler and more transparent method of solution than optimization performed with Hopfield-like networks and poses very mild requirements on the functions appearing in the problem. Simulation results are illustrated and compared with an off-the-shelf optimization tool.

The precision of new HERA data on jet photoproduction opens up the possibility to discriminate between different models of the photon structure. This requires equally precise theoretical predictions from perturbative QCD calculations. In the past years, next-to-leading order calculations for the photoproduction of jets at HERA have become available. Using the kinematic cuts of recent ZEUS analyses, we compare the predictions of three calculations for different dijet and three-jet distributions. We find that in general all three calculations agree within the statistical accuracy of the Monte Carlo integration yielding reliable theoretical predictions. In certain restricted regions of phase space, the calculations differ by up to 5%.

Nuclear fusion is the energy source that powers the sun. For more than four decades man has sought to develop this essentially inexhaustible, clean power source for use on earth. Unfortunately the conditions needed to initiate fusion are daunting; the nuclear fuel, consisting of isotopes of hydrogen, must be heated to temperatures in excess of 100,000,000 C and maintained at that temperature long enough for the nuclear fuel to ignite and burn. Lasers are being used as one of the tools to achieve these conditions. The best lasers for this work are those that derive their energy from a unique set of optical glasses called laser glasses. The work to develop, manufacture and test these glasses has involved a partnership between university and industry that has spanned more than 25 years. During this time lasers used in fusion development have grown from small systems that could fit on the top of a table to systems currently under construction that are approximately the size of a municipal sports stadium. A brief historical and anecdotal account of the development of laser glasses for fusion energy research applications is the subject of the presentation.

Stanford Linear Accelerator Center (SLAC) was faced with the need to secure its PeopleSoft-Oracle business system in an academic environment that has no firewall. To provide protected access to the database servers for NT-based users all over the site while not hindering the lab's open connectivity with the Internet, we implemented a pseudo three-tier architecture for PeopleSoft with Windows Terminal Server and Citrix MetaFrame technology. The client application and Oracle database were placed behind a firewall, and access was granted via an encrypted link to a thin client. Authentication in the future will be through two-factor token cards. NT workstations in the business system unit were further secured through switched network ports and an automated installation process that included SMB signing and disabling LM Authentication in favor of NTLMv2. The hardened workstations then accessed the business system through the Citrix Secure ICA client. How these security measures affected our mixed environment (Windows9x, Samba, Transarc AFS clients, Pathworks, developers, researchers) is discussed.

Conscious awareness of our environment is based on a feedback loop comprised of sensory input transmitted to the central nervous system leading to construction of our ''model of the world,'' (Lewis et al, 1982). We then assimilate the neurological model at the unconscious level into information we can later consciously consider useful in identifying belief systems and behaviors for designing diverse systems. Thus, we can avoid potential problems based on our open-to-error perceived reality of the world. By understanding how our model of reality is organized, we allow ourselves to transcend content and develop insight into how effective choices and belief systems are generated through sensory derived processes. These are the processes which provide the designer the ability to meta model (build a model of a model) the user; consequently, matching the mental model of the user with that of the designer's and, coincidentally, forming rapport between the two participants. The information shared between the participants is neither assumed nor generalized, it is closer to equivocal; thus minimizing error through a sharing of each other's model of reality. How to identify individual mental mechanisms or processes, how to organize the individual strategies of these mechanisms into useful patterns, and to …

We discuss two topics in the production of heavy quarks in deep-inelastic scattering: the next-to-leading order Monte-Carlo HVQDIS and the next-to-leading logarithmic resummation of soft gluon effects, including estimates of next-to-next-to-leading order corrections therefrom.

A geotechnical study has been completed in H-Area for the In-Tank Precipitation Facility (ITP) and the balance of the H-Area Tank Farm (HTF) at the Savannah River Site (SRS) in South Carolina. The study consisted of subsurface field exploration, field and laboratory testing, and engineering analyses. The purpose of these investigations is to evaluate the overall stability of the H-Area tanks under static and dynamic conditions. The objectives of the study are to define the site-specific geological conditions at ITP and HTF, obtain engineering properties for the assessment of the stability of the native soils and embankment under static and dynamic loads (i.e., slope stability, liquefaction potential, and potential settlements), and derive properties for soil-structure interaction studies. This document contains the records of cone penetrometer and dilatometer soundings for the In-Tank Precipitation Facility (ITP) and H-Tank Farm (HTF) Geotechnical Report, Volume 3.

We have studied the determination of the running b-quark mass, m{sub b}(M{sub Z}), using Z{sup 0} decays into 3 or more hadronic jets. We calculated the ratio of {ge} 3-jet fractions in e{sup +}e{sup -} {yields} b{bar b} vs. e{sup +}e{sup -} {yields} q{sub l}{bar q}{sub l} (q{sub l} = u or d or s) events at next-to-leading order in perturbative QCD using six different infra-red- and collinear-safe jet-finding algorithms. We compared with corresponding measurements from the SLD Collaboration and found a significant algorithm-dependence of the fitted m{sub b}(M{sub Z}) value. Our best estimate, taking correlations into account, is m{sub b}(M{sub Z}) = 2.52 {+-} 0.27(stat.){sub -0.47}{sup +0.33}(syst.){sub -1.46}{sup +0.54}(theor.) GeV/c{sup 2}.

We have utilized ''in situ'' X-ray Absorption Fine Structure Spectroscopy to investigate the structure and composition of thin oxide films of nickel and iron that have been prepared by electrodeposition on a graphite substrate from aqueous solutions. The films are generally disordered. Structural information has been obtained from the analysis of the data. We also present initial findings on the local structure of heavy metal ions, e.g. Sr and Ce, incorporated into the electrodeposited nickel oxide films. Our results are of importance in a number of technological applications, among them, batteries, fuel cells, electrochromic and ferroelectric materials, corrosion protection, as well as environmental speciation and remediation.

The performance of a stand-alone polymer electrolyte fuel cell (PEFC) system directly fueled by hydrogen has been evaluated for transportation vehicles. The study was carried out using a systems analysis code and a vehicle analysis code. The systems code includes models for the various PEFC components and is applicable for steady-state and transient situations. At the design point the system efficiency is above 50% for a 50-kW system. The efficiency improves under partial load and approaches 60% at 40% load, as the fuel cell operating point moves to lower current densities on the V-I polarization curve. At much lower loads, the system efficiency drops because of the deterioration in the performance of the compressor, expander, and eventually the fuel cell. The system performance suffers at lower temperatures, as the V-I characteristic curve for the fuel cell shifts downward because of the increased ohmic losses. The results of the transient analysis indicate that the hydrogen-fueled PEFC system can start rather rapidly, within seconds from ambient conditions. However, the warm-up time constant to reach the design operating temperatures is about 180 s. It is important during this period for the coolant to bypass the system radiator until the coolant temperature approaches the …

The protection of nuclear and civil structures from the destructive effects of earthquakes has been the focus of intense research and development throughout the world. Seismic isolation is an effective means for reducing and even eliminating the devastating consequences of earthquakes on people, equipment and structures. Engineers have developed many devices for implementing the seismic isolation strategy and the most effective and economical ones have been identified through the test of time. One of these devices is the laminated elastomeric isolation bearing. The behavior of high damping elastomer bearings during several recent earthquakes has shown that they are a viable device for mitigating the effects of earthquakes. In this paper, results are presented from recent tests on two different elastomers. The first is a highly filled, high modulus, high damping elastomer and the second is a highly-filled, low modulus, high damping elastomer. The stiffness recovery characteristics of the high modulus elastomer subjected to beyond design basis strains and the results of seven years of aging on the low modulus elastomer are presented.

The PEP-II B-Factory is presently engaged design and fabrication of several unique magnets referred to as septum quadrupoles. This family of magnets is required to contain a low energy beam of positrons (3.1 GeV) and a high energy electron beam (9.0 GeV) in adjacent beam pipes housed within a common magnet. One beam will be focused while the other passes through an almost field free region. To do this, an asymmetric magnet must be designed having a pure, high quality quadrupole field in the magnet aperture and an adjacent low field bypass channel. A current sheet or ``septum`` coil must be placed between these two regions to produce the desired magnetic results. Design of this high current density septum coil presents many challenges since space between the two vacuum beam pipes where the coil must reside is very limited. This paper will describe the overall design of the septum quadrupoles and the solutions employed to achieve the required magnetic performance.

The Low Energy Ring (LER) of the PEP-II B-Factory will use wiggler magnet systems for emittance control and additional damping. The wiggler baseline is a set of 11 individual iron core, water cooled, dipole magnets designed operate at 1.6 T and generate 400 kW of synchrotron radiation. Space has been provided to add a second wiggler with additional 400 kW of synchrotron radiation if more damping is needed in the future. A copper vacuum chamber is used with continuous antechambers connected to both sides of the beam chamber via slots. Synchrotron radiation dump surfaces both antechambers. We describe the design and analysis of the wiggler magnets and the salient features of the vacuum chamber and dumps.

Neutron scattering has been used to study the spin fluctuations in the YBaCuO and BiSrCaCuO materials. Evidence is found for both incommensurate fluctuations and a commensurate resonance excitation. Measurements on the lattice dynamics for YBaCuO show incommensurate structure that appears to stem from charge fluctuations that are associated with the spin fluctuations.

For the last several years, US DOE`s Office of Environmental Restoration and Waste Management (EM) has actively pursued a policy of involving local stakeholders in the planning and implementation of environmental management activities at contaminated sites throughout the DOE complex. An ongoing ORNL study is focusing on how to measure the success of the public participation efforts. Five DOE facilities were selected for intensive site visits; 4 or 5 additional sites were covered by telephone interviews. Key stakeholder groups were interviewed. Based on the data collection and preliminary analysis, 17 definitions of success were developed for public participation programs. Objective and subjective indicators of the success of the public participation efforts are discussed.

High convergence, indirect drive implosion experiments have been done at the Nova Laser Facility. The targets were deuterium and deuterium/tritium filled, glass microballoons driven symmetrically by x rays produced in a surrounding uranium hohlraum. Implosions achieved convergence ratios of 24:1 with fuel densities of 19 g/cm{sup 3}; this is equivalent to the range required for the hot spot of ignition scale capsules. The implosions used a shaped drive and were well characterized by a variety of laser and target measurements. The primary measurement was the fuel density using the secondary neutron technique (neutrons from the reaction {sup 2}H({sup 3}H,n){sup 4}He in initially pure deuterium fuel). Laser measurements include power, energy and pointing. Simultaneous measurement of neutron yield, fusion reaction rate, and x-ray images provide additional information about the implosion process. Computer models are in good agreement with measured results.

In support of the commercialization of fuel cells for transportation, Georgetown University, as a part of the DOE/DOT Fuel Cell Transit Bus Program, conducted a market study to determine the inventory of passenger buses in service as of December, 1991, the number of buses delivered in 1991 and an estimate of the number of buses to be delivered in 1992. Short term and long term market projections of deliveries were also made. Data was collected according to type of bus and the field was divided into the following categories which are defined in the report: transit buses, school buses, commercial non-transit buses, and intercity buses. The findings of this study presented with various tables of data collected from identified sources as well as narrative analysis based upon interviews conducted during the survey.

Solid targets irradiated with 10{sup 19} W/cm{sup 2} or greater of 1 {mu}m light in picosecond pulses are found to be radioactive. The strongest activities observed are the result of photonuclear reactions in which an energetic photon excites the nucleus sufficiently to produce particle emission leaving a radioactive daughter. The photoreaction cross sections are known for a wide range of nuclei and provide a quantitative measure of the photon flux produced in the target. Both the delayed daughter activities and measurements of the prompt particles emitted in the reaction can be used as diagnostics. Examples of these techniques applied in diagnosing experiments at the Nova laser facility adapted to generate petawatt pulses using chirped pulse amplification will be presented. These results will be compared with bremsstrahlung photon spectra calculated using electron spectra measured in a magnetic spectrograph. {copyright} {ital 1999 American Institute of Physics.}

Turnaround time for this project was 60 days, as required in Reference 2. The analyses were to be performed using SW-846 procedures whenever possible to meet analytical requirements as a Resource Conservation Recovery Act (RCRA) protocol project. Except for the preparation and analyses of polychlorinated biphenyl hydrocarbons (PCB) and Nickel-63, which the program deleted as a required analyte for 222-S Laboratory, all preparative and analytical work was performed at the 222-S Laboratory. Quanterra Environmental Services of Earth City, Missouri, performed the PCB analyses. During work on this project, two events occurred nearly simultaneously, which negatively impacted the 60 day deliverable schedule: an analytical hold due to waste handling issues at the 222-S Laboratory, and the discovery of PCBs at concentrations of regulatory significance in the 105-N Basin samples. Due to findings of regulatory non-compliance by the Washington State, Department of Ecology, the 222-S Laboratory placed a temporary administrative hold on its analytical work until all waste handling, designation and segregation issues were resolved. During the hold of approximately three weeks, all analytical and waste.handling procedures were rewritten to comply with the legal regulations, and all staff were retrained in the designation, segregation and disposal of RCRA liquid and solid wastes.

For the characterization of inertial confinement fusion plasmas we implemented a high-energy 4{omega} probe laser at the Nova laser facility. A total energy of > 50 Joules at 4{omega}, a focal spot size of order 100 {micro}m, and a pointing accuracy of 100 {micro}m was demonstrated for target shots. This laser provides intensities of up to 3 x 10{sup 14}W cm{sup -2} and therefore fulfills high-power requirements for laser-plasma interaction experiments. The 4{omega} probe laser is now routinely used for Thomson scattering. Successful experiments were performed in gas-filled hohlraums at electron densities of n{sub e} > 2 X 10{sup 21}cm{sup -3} which represents the highest density plasma so far being diagnosed with Thomson scattering.

A 1 mm square diamond photoconductive detector (PCD) has been installed on the LLNL Nova laser system, for use as a broad band soft x-ray power diagnostic. The PCD is installed behind an array of pinholes, which cast multiple, overlapping images of the source onto the diamond. This allows reduction of the x-ray intensity, to avoid saturation problems, while avoiding the spectral dependency of thin film filters. The diode current is read out on a 5 GHz bandwidth scope. The system is calibrated by comparison to an absolutely calibrated array of filtered vacuum x-ray photodiodes (XRD` s) (``dante``). The time response of the PCD and its bias electronics have been characterized using the 5th harmonic (210 nm) of a short pulse (< 1 ps) Ti:sapphire laser. The data show a fast rise, limited by the 5 GHz scope bandwidth, and a slower fall off, characterized by an RC time of order 200 ps.

We have developed a hand-held fiber optic based optical coherence tomography (OCT) system for scanning of the oral cavity We have produced, using this scanning device, in viva cross-sectional images of hard and soft dental tissues in human volunteers Clinically relevant anatomical structures, including the gingival margin, periodontal sulcus, and dento-enamel junction, were visible in all the images The dento-enamel junction and the alveolar bone were identifiable in approximately two thirds of the images These images represent, to our knowledge, the first in viva OCT images of human dental tissue.

Diagnostics for the National Ignition Facility (NIF)/Inertial Confinement Fusion (ICF) program must include good characterization of the fusion source. Ideally, diagnostics would measure the spatially-resolved history of the fusion reaction rate and temperature. Existing diagnostics can satisfy this goal only partially. One class of new techniques that could play a major role in high-yield diagnostics is measurements based on fusion {gamma} rays. The Fusion Diagnostic Gamma Experiment (FUDGE) can be used to perform energy-resolved measurements of (D,T) fusion reaction rates This diagnostic is based on the 16 7-MeV {gamma} rays that are produced by (D,T) fusion. The {gamma} rays are free of spectral dispersion and can be detected with a high bandwidth Cherenkov detector. A simple magnetic monochromator selects signals from the 16 7-MeV {gamma} rays and reduces background signals from non-fusion {gamma} rays.