Chemical Engineering Division Summary Report January, February, and March, 1954 (open access)

Chemical Engineering Division Summary Report January, February, and March, 1954

Progress is reported on (1) direct cycle boiling reactor studies, (2) solvent extraction, (3) fluoride volatilization separation process, (4) elevated temperature separations, (5) fluidization studies, (6) development of analytical techniques, (7) processing and utilization of radioactive wastes.
Date: May 1, 1954
Creator: Lawroski, Stephen; Rodger, W. A. & Vogel, R. C., 1928-
System: The UNT Digital Library
Differential Thermal Analysis of Irradiated Diamond and Silicon Carbide (open access)

Differential Thermal Analysis of Irradiated Diamond and Silicon Carbide

It was demonstrated by differential thermal analysis (DTA) that: 1. Catastrophic amounts of energy can be stored in diamond. 2. Even at low irradiations, the release takes place over serval hundred degrees, indicating a spectrum of activation energies. 3. At higher irradiations, the stored energy release is considerably less than the increased energy contents and seems not to have been completely released even at the highest temperatures reached. 4. There is some indication of an increased heat capacity below the temperature of stored energy release. It was shown by DTA that large amounts of energy can be stored in silicon carbide on irradiation. The release was found to be spread out over a greater range of temperatures than in diamond and indicated a larger and higher group of activation energies. Catastrophic release was not achieved. The amount of stored energy released over the range of temperatures used was 140 cal/g in a sample irradiated in a water-cooled test hole at HEW for an exposure of 265 Mwd/aT.
Date: December 1, 1954
Creator: Primak, William, 1917-
System: The UNT Digital Library
Chemical Engineering Division Summary Report October, November, and December, 1953 (open access)

Chemical Engineering Division Summary Report October, November, and December, 1953

Progress is reported on (1) experimental breeder reactor program, (2) solvent extraction, (3) fluoride volatilization separation process, (4) elevated temperature separations, (5) denitration of uranyl nitrate in a fluidized bed, (6) development of analytical techniques, (7) processing and utilization of radioactive wastes.
Date: January 1, 1954
Creator: Lawroski, Stephen & Stevenson, C. E.
System: The UNT Digital Library
Testing of Fuel Element Parts and Assemblies by the Radiographic Method (open access)

Testing of Fuel Element Parts and Assemblies by the Radiographic Method

Concurrently with the production of canned uranium slugs for pile operation there arises the problem of nondestructive testing so that no slug which may fail structurally during operation be placed in the pile. The ultimate goal of any such testing program is to devise nondestructive testing methods which will eliminate defective slugs. A secondary goal of the testing program is to learn as much as possible about the construction of the canned slug so that the mechanisms of failure can be understood. Radiography, an increasingly useful nondestructive test method, offered one possible way of investigating this area.
Date: July 1, 1954
Creator: VanderLaan, Robert H.
System: The UNT Digital Library
Corrosion and Stability Tests on Chemical Poisons in Higher-Temperature Water (open access)

Corrosion and Stability Tests on Chemical Poisons in Higher-Temperature Water

Corrosion-stability tests have been made in static autoclaves at 500 and 600F on solutions of compounds having high neutron cross sections to evaluate their usefulness for shutdown purposes. The only compound tested which appeared to be completely stable in 600F water was boric acid. Limited corrosion data did not show it to cause excessive corrosion of zirconium or stainless steel.
Date: September 1, 1953
Creator: Breden, Calvin Rudolph, 1901- & Abers, Alma
System: The UNT Digital Library
Development of a Process to Produce Zirconium Hanford Type Process Tubing by Roll Forming And Inert Arc Welding (open access)

Development of a Process to Produce Zirconium Hanford Type Process Tubing by Roll Forming And Inert Arc Welding

The development of methods which were successful in producing zirconium Hanford type process tubing by roll forming and inert are welding (He) flat strip to which appropriate rails had ben previously attached by resistance welding is described in this report. Grade 2 drip arc melted crystal bar material was used.
Date: May 1, 1953
Creator: Noland, R. A. & O'Keefe, G. B.
System: The UNT Digital Library
Chemistry Division, Section C-1, Summary Report for April, May, And June 1952 (open access)

Chemistry Division, Section C-1, Summary Report for April, May, And June 1952

Report describing the research and development activities related to nuclear chemistry and radiochemistry and basic chemistry conducted by the Argonne National Laboratory Chemistry Division, Section C-1.
Date: August 1, 1952
Creator: Osborne, D. W.
System: The UNT Digital Library
Chemistry Division, Section C-1, Summary Report For October, November and December 1951 (open access)

Chemistry Division, Section C-1, Summary Report For October, November and December 1951

Report describing the research and development activities related to nuclear chemistry and radiochemistry and basic chemistry conducted by the Argonne National Laboratory Chemistry Division, Section C-1.
Date: February 1, 1952
Creator: Manning, W. M. & Osborne, D. W.
System: The UNT Digital Library