The results of an experimental investigation of the downwash and wake characteristics behind a rectangular plan-form wing of aspect ratio 3.5 are presented. The airfoil section was a 5-percent-thick, symmetrical double wedge. The tests were made at a Mach number of 1.53 and a Reynolds number of 1.25 million. A comparison between experimental and theoretical values of the downwash angles is made.

Memorandum presenting an investigation conducted to evaluate the effectiveness of a simple internal regenerative fuel preheater for a 20-inch-diameter ram jet. Data obtained at subsonic sea-level conditions indicated that fuel could be successfully preheated in this manner.

Report presenting the results of an experimental investigation of rim cracking in a welded-blade composite gas-turbine wheel, in two carbon-steel disks, and five tool-steel disks. Various characteristics were investigated, including the effectiveness of holes in preventing crack propagation and the influence of hardness and various types of notch on rim cracking.

Report presenting the results of an experimental investigation to determine the pressure-recovery and mass-flow characteristics of single and twin NACA submerged intakes on the sides of a fuselage at various angles of sideslip. Tests were conducted with single and twin submerged intakes on a model of a fighter-type airplane.

From Introduction: "The aerodynamic characteristics of a series of 10-foot-diameter propellers are being investigated in the Langley 16-foot high-speed tunnel in a comprehensive propeller research program. Using high-critical-speed NACA 16-series airfoil sections (reference 1), these propellers are designed to have Betz minimum induced-energy loss loading (reference 2) for a blade angle of 45^o at the 0.7 radius, when used as a four-blade propeller operating at an advance ratio of approximately 2.1 The ultimate purpose of the program is to determine the influence upon propeller design factors and of compressiblity; the propeller tests reported herein form part of the investigation of the effects of blade-section thickness ratio."

Report presenting measurements of elevator-stabilizer effectiveness and trim of the X-1 airplane at 40,000 feet altitude at a range of Mach numbers and normal-force coefficients.

Report presenting a rocket-powered model of the X-3 configuration flown through a range of Mach numbers to determine the response of the model to rapid deflections of the horizontal tail and its effects on lift, drag, longitudinal stability and control, and longitudinal-trim change. The model was found to remain statically and dynamically stable through the lift-coefficient and Mach number range of the test.

Report presenting an investigation of the overall performance of the J35-A-23 compressor, which is a 16-stage compressor designed to produce a total-pressure ratio of 8.75 at an equivalent flow of 155 pounds per second and an equivalent speed of 6100 rpm. Tests were run at a range of flows and speeds. Notes on installation and characteristics of the compressor are also provided.

From Introduction: "In the present paper, which supplements reference 1, V-g records obtained from F8F-2 airplanes in 1949 are analyzed statistically to determine the frequency of experiencing large values of normal load factor and airspeed. These results are compared with the results from the F8F-1 airplane."

Report presenting results of a flight investigation using a jet-powered bomber airplane to determine the vertical tail loads. Strain-gage measurements were made of the fin and rudder loads in abrupt rudder kicks and in gradual sideslip maneuvers.

Report presenting an investigation in the transonic blowdown tunnel from Mach numbers 0.80 to 1.41 to determine the increments in lift and drag due to installation of a triangular-shaped air inlet in the root of a 45 degree sweptback wing and to determine the internal flow characteristics of the inlet. Results regarding pressure measurements of the inlet model, force measurements of basic and inlet models, and effect of boundary-layer bypass scoop and fuselage nose configuration on characteristics of inlet model are presented.

Report presenting an investigation to determine the dynamic stability and control characteristics of a scale flying model of the Consolidated-Vultee XFY-1 vertically rising airplane. It includes the results of flight tests to determine the stability and control characteristics of the model in hovering, take-offs, and landings.

Report presenting free-flight tests made with four fin-stabilized bodies of fineness ratio 8.91 to determine the effect of body cross-sectional shape on body drag at a range of Mach and Reynolds numbers. Results regarding the curve of drag coefficients, drag on the nose and body, and body pressure drag are provided.

Report presenting an experimental investigation of pyramidal, wedge-like bodies as devices for delaying separation of a turbulent boundary layer. Within certain limits, effective boundary-layer control was obtainable with wedges of different geometry, but the drag of the wedges was high, making it desirable to keep their size to a minimum. Greater maximum lift was obtainable by placing the wedges well forward along the chord and by allowing open spaces between adjacent wedges.

Report presenting an investigation of a wing-body combination with a plane triangular wing of aspect ratio 2 and NACA 0008-63 sections in streamwise planes at subsonic and supersonic Mach numbers. Lift, drag, and pitching moment are presented for a range of Mach and Reynolds numbers.

Report presenting a wing-body combination with a plane triangular wing of aspect ratio 2 and NACA 0005-63 sections in streamwise planes has been investigated at subsonic and supersonic Mach numbers. Lift, drag, and pitching moment are presented for a range of Mach and Reynolds numbers.

Report presenting an investigation of the rolling effectiveness at transonic and supersonic speeds of an inversely tapered sweptback wing with a 10-percent-thick cambered airfoil section and outboard partial-span controls made by means of rocket-propelled test vehicles.

Report presenting flight testing at high-subsonic and supersonic speeds at high Reynolds numbers to determine the zero-lift drag of a fin-stabilized body and a wing-body combination. The body was parabolic in profile, had a fineness ratio of 10, and a ratio of body frontal area to wing area to 0.306.

Effect of distributed boundary-layer suction on operating pressure ratio of a supersonic wind tunnel was investigated. Investigation was made in 3.84- by 10-inch supersonic tunnel operating at Mach number 2.0 and suction was applied in neighborhood of the normal shock to two walls of a constant-area extension of test section. A reduction of 4 percent of operating pressure ratio was attributed to improved flow conditions at subsonic-diffuser inlet. The theoretical normal shock was, in practice, replaced by a multiple-branch shock configuration across which the flow parameters changed in approximate accordance with the Rankine-Hugoniot values.

Report presenting the results of an experimental wind-tunnel investigation of the damping in pitch of two triangular wings having leading edges swept back 45 degrees are presented. The wings differed only in airfoil section. Results regarding the damping coefficients, aeroelastic effects at supersonic speeds, Reynolds number effects, and application of the results to the prediction of the dynamic behavior of full-scale aircraft are provided.

From Summary: "A preliminary investigation was conducted to determine the altitude performance of pentaborane and a blend fuel of 64.2 percent pentaborane in JP-4 fuel in a tubular combustor of a current production type turbojet engine. Deposits on the liner barrel and dome were virtually nonexistent. The combustion efficiency of 90 to 94 percent for pentaborane and approximately 90 percent for the blend. Outlet temperature profiles were marginal; however, the developed combustor provided lower pressure losses than obtained in conventional combustors."

Report presenting an investigation in the 7- by 10-foot tunnel to determine the effect of aspect ratio on the aerodynamic characteristics in pitch of wing-fuselage combinations with 45 degrees sweepback at the quarter-chord line and 0.6 taper ratio at high subsonic speeds. Results regarding the lift characteristics, pitching-moment characteristics, drag characteristics, and lift-drag ratios are provided.

Report presenting a compilation of free-spinning model results of investigations of the spin and recovery characteristics of 12 flying-wing and unconventional-type designs. Dimensional data, mass data, and three-view drawings of the models that correspond to each of the 12 airplane designs are provided. Results regarding erect spins, inverted spins, and spin-recovery parachutes are also provided.

Report presenting the performance of the turbine component of a Python turbine-propeller engine with four tail-pipe configurations determined over a range of altitudes, engine speeds, and fuel flows. Results regarding the corrected turbine speed, corrected turbine enthalpy drop, pressure ratio, and efficiency were established on a turbine-characteristic plot.