The purpose of this report is to present the information obtained relative to the characteristic adsorption of radioisotopes in a long (forty feet) laboratory soil column treated with a high salt, process waste of high activity density. The movement of adsorbed cations in a soil column subjected to prolonged leeching by water also was determined.

Abstract: The data obtained from the radioassay of fish collected in vicinity of the Hanford Works between April, 1948 and June, 1950 are presented. Most of the radioactivity in the fish resulted from the concentration of p32 in the scales, bone, and certain visceral organs. The level of activity density in the fish was influenced by size, feeding habits and metabolic rate in addition to the activity density of the water. Changes in operation of nuclear reactors have resulted in progressive increases in activity densities of fish from one year to the next. The levels of radioactivity are not sufficiently high to be hazardous to either the fish or persons eating them.

From introduction: "This report provides background information regarding the study results presented in the first volume of this report and provides information resulting from the studies made on the gas cooled reactor concept."

A preliminary evaluation of the autoclave corrosion behavior of a series of U-low C alloys and a series of U-low Zr alloys prepared by Fuels Fabrication Development Operation has been made. The corrosion testing was conducted by Coatings and Corrosion Operation by the experimental methods and procedure outlined in HW-61378.

From objective: "The objective of this work was to design, develop, assemble, and test and automatic analyzing monitor for recording the prominent isotopes in reactor effluent cooling water."

This document describes required laboratory space and lists major equipment items necessary for a routine water quality laboratory in the P. R. T. R. Building. During discussions with R. D. Widrig and V. L. Rooney about the analytical sample program for the Plutonium Recycle Test Reactor, the author was asked to summarize equipment and space needs for a water control laboratory to provide routine analytical coverage on some of the water systems. Based upon 1706-KE-KER experience, some operating personnel may be used to provide analytical coverage on those routine analyses that are needed on around-the-clock basis with a savings of both time and money.

Report describing the methods, discrepancies, accuracy of methods, and conclusions of two different analytical methods of spectrochemical analysis of plutionium.

The computation of liquid-boiling heat exchanger performance under a wide variety of operating conditions is a cumbersome, time-consuming procedure. Rapid evaluation of a design requires the use of some form of computational aid. Exchanger equations covering the case of liquid-boiling heat transfer have been derived and evaluated for a specific correlation of local boiling condition. Examination of various data as presented by Bonilla and McAdams indicates that the boiling coefficients are not fully reproducible and appear to be sensitive to surface conditions, gases, geometry, etc. It therefore is believed advantageous to extend the reference analysis to cover a wide range of surface and pool boiling conditions. In this manner, the effects of potential errors in both boiling and liquid film coefficients may be investigated with minimum effort.

A continuous gamma-monitoring instrument capable of measuring the activity of the product of the Uranium Recovery plant has been developed and applied under process conditions. It has a detection limit of 15% and a normal range of up 1000% of the activity of natural uranium. Activity measurements made with this instrument have shown good correlation with laboratory determinations and are contributing to improved control of the solvent extraction process.

Introduction:"A corrosion test program to determine the effect TBP process streams, which contain chlorides, have upon the corrosion resistance of several construction materials, was completed. Data are presented on the performance of Carpenter 20, T-309SCb, T-347. T-316 and tantalum in the RAF and RAW process streams and on the performance of titanium and zirconium in the RAW stream."

Introduction: In order to determine the relative corrosion resistance of welded mild and stainless steels in Redox Stream IAW neutralized to pH 0, 2, and 10 a test program, described below, has been carried out.

Introduction: "The need for a method of acid determination which could be used for small samples and easily adapted to remote control led to the investigation of the use of electrolytically generated base for the titration of acid in certain solutions. The use of electrolytically generated base for the titration of acetic acid in the presence of nitric acid has been reported (1)."

This document authorizes the performance in accordance with the specifications noted, the PRTR Critical Tests described herein. The experiments described have the following objectives:

Introduction: "When uranium slugs are irradiated in the Hanford piles, one of the many substances formed is U-237. It arises primarily from the reaction: U-238 (n,2n) U-237. This uranium isotope is a beta and gamma emitter with a half-life of 6.7 days. Because it is isotopic with U-238, it accompanies the uranium recovered by the Redox Process, and its concentration is, of course, not diminished by the fission-product decontamination cycles. As a consequence, the maximum total decontamination of irradiated uranium which can be achieved depends upon the quantity of U-237 present in the processed uranium."

From introduction: "The following report presents a body of information obtained in the Health Instrument Development Laboratory from September, 1948, to the present, and is intended to be a preliminary review of [the study of electrodeposition of plutonium]. Many improvements in technique and methods and investigations along lines not explored are suggested by the present work. These will be undertaken as time permits, and reported at a later time."

The purpose of this program is to determine the effects of neutron radiation and reactor gaseous atmospheres on the structural integrity of candidate materials for the PRTR gas-cooled loop. An exploratory investigation is being conducted to select a high temperature resistant alloy for the fabrication of tubes and supporting appliances for the PRTR gas-cooled loop. In addition to a low neutron cross section, the material must be able to withstand the operating conditions outlined in Table 1.

As potentially suitable alternate methods of installing closure plugs in cored slugs, four different schemes were considered. One of these schemes, whereby a flat chamfered uranium disc is crimped into a counterbored recess at each end of the bare slug after pickling, was developed to a workable state, and partially evaluated prior to reassignment of the job to another group. From the results of initial evaluation tests, this process appears to provide leak-free core closures and offers economic benefits that make it attractive as a production method, should cored slugs be adopted as standard.

Objective: "The laboratory equilibrium study RC-E-1 described in this report was carried out to obtain uranium equilibrium curves at various concentrations of nitric acid and of TBP."

Studies are described of the percutaneous absorption and gastrointestinal absorption in the rat of ruthenium administered in the form of "insoluble particulates." Results are also reported on the gastrointestinal holdup of these particulates.

This report has been prepared to review the status of design for buried waste line and presents the major factors involved in support of the conclusions. This report is the second in a series reporting on the general subject of underground corrosion. The first on cathodic protection of waste lines noted the technology of stainless steel and its effect on existing waste line and recommended continued use of the cathodic protection. Experience with buried stainless pipe had shown that, unless protected, such installations are subject to severe pit corrosion. As designs developed the use of encasements has become a standardized approach. This discussion will evaluate this trend.

Early in the U.S. gas-cooled reactor program, it was recognized that a considerable research and development effort would be needed to utilize the full potential of gas cooling. Hanford Laboratories contribution to this program began in August, 1958 when a graphite studies program was initiated. The primary objectives of the Hanford program are: (1) to secure improved knowledge of the reaction of gas coolants with protected and unprotected graphites over a range of conditions of practical interest for gas cooled power reactors with tolerable damage to the graphite moderator.

From introduction: "This report is concerned with exploratory experiments designed to studies the efficiency of a number of scavengers for zirconium and niobium adsorption and to provide preliminary information on the best conditions to employ on the most satisfactory of those scavengers studied, namely Super Filtrol FO. The data in this report include data obtained through October, 1949, and are by no means considered to be final. The investigation is currently being actively continued."

Study of factors, such as the average particle size and particle-size distribution, which affect the fluidization properties of uranium trioxide powders.

Fillerwelding is a fusion welding process that provides for the automatic addition of controlled amounts of fillerwire during inert-gas-shielded tungsten-arc welding. Fillerwelding aluminum jacketed fuel elements has been successfully demonstrated and is being used on a routine basis. This manual was written to provide the necessary information to operate and maintain the fillerweld equipment.