Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause observable differences in the rod could not be detected on analysis, but was visible in the microstructure."

This report is a progress report detailing operations and ongoing projects at the Brookhaven National Laboratory. The report describes new developments with buildings and progress regarding ongoing experiments. The report includes photographs showing progress in the construction of the reactor and other images and figures that accompany the descriptions of projects.

Technical report describing the building of safety devices and features for the Oak Ridge reactor by the Reactor Safeguard Committee of the Atomic Energy Commission. Outlines the difficulties encountered in detailed design and construction operations for the facility.

From abstract: "This report presents the progress in the laboratory development of a continuous solvent recovery process for the tributyl phosphate-diluent mixture used in the Purex Process. Investigations were made with 1/2" diameter pulse columns, using a nine foot sodium carbonate contacting column and a four foot water wash column."

From abstract: "The following report presents a summary of operating experience with decelerating receivers for ion beam reception. Sample calculations for design of such a receiver for the isotopes of lithium are presented. Estimates of maximum production and requirements to attain such production are given. The maximum ion beam envisioned is 17 amperes obtained from extrapolation of experimental results."

Technical report presenting preliminary results obtained in the static corrosion test program to screen promising construction materials for a proposed liquid fuel power breeder reactor.

Technical report investigating the distribution of rare earth elements between a liquid bismuth-uranium solution and fused KCI-LiCi mixtures. Report warrants further research on the liquid bismuth-uranium-fused salt system due to the benefit of continuous fission removal processes.

Technical report describing the Brookhaven National Laboratory nuclear reactor and the physical studies of heat transfer and efficiency conducted to improve nuclear reactor operations.

From introduction: "The work described in this report was carried out as part of the feasibility study (ORNL-117) of a supercritical water reactor (SCWR) for use in nuclear propulsion of aircraft. The object of this work was to study the dynamic behavior of a particular design of supercritical water reactor. Numerical results are presented in Appendix I."

Abstract: "Probes were used to measure certain properties of the cloud of positive ions and electrons ejected from a pulsed ion source having two hydrogen-loaded electrodes. Time-of-flight measurements show: the presence of H+ ions with 50 ev directed energy; an increase of this energy with increasing pulse current in the source; a higher peak yield of ions with higher peak currents in the source; and higher yields and higher ion energies up to 110 ev have been recorded with the use of a pulsed magnetic field impressed upon the source. The neutral positive ion-electron beam from the source has been projected against an increasing magnetic field and the reflected and transmitted signals have been recorded and compared as a function of the magnetic field. Probe signals from the plasma as it encounters the magnetic field are oscillatory, suggesting that magnetohydrodynamic phenomena are presented."

Abstract: "The reflections of microwaves from the walls of a plasma-containing vessel are studied. The probable cause of the reflections is discussed, and several suggestions are made for eliminating the reflections from the waveguide in the vessel and particularly from the pyrex vessel wall and copper tubing surrounding the pyrex. Quarter-wave-thick carbon-filled plastics or glasses having a very low vapor pressure room most promising when placed inside the pyrex cylinder. BaTiO3 appears to be an excellent material when placed outside the vacuum."

"An investigation of the chemical effects of 1-Mev electrons on BrF3 at 25 degrees C has been carried out. Pressure measurements taken during the irradiation suggest the presence of Br2 and BrF5 as decomposition products and a fractional distillation of the irradiated liquid confirmed their presence. The extent of decomposition was determined both by fraction distillation and spectrophotometric methods. The radiation effect seemed to reach saturation when approximately 10 per cent of the BrF3 was destroyed. The exposure necessary for the decomposition products to reach a concentration of half the saturated value was calculated to be 2.7 microampere hours/cc BrF3 while the "G" value was found to be 1.5. A qualitative comparison of irradiation dosages from the Statiltron with that expected from spent fuels revealed that little decomposition of BrF3 reagent is to be expected from 1-say cooled Hanford fuel (in pile for 100 days) while in the case of 1-day cooled MTR type fuel (in pile for 12 days) a saturated effect might be realized in 1-3 hours. Since at most only 10 per cent of the BrF3 is destroyed it is concluded that BrF3, from a radiation resistance standpoint, is a suitable standpoint, is a suitable reagent for …

"The Atomic energy Commission has undertaken a development program to provide the technology needed for the evaluation and economic design of nuclear power plants. This program is to be carried out during the next five years at several national laboratories and industrial organizations. The Sodium Graphite Reactor (the SGR) is one of those to be investigated and experimentally tested as part of this 5-year effort. The program on the SGR is intended to expand our area of information covering sodium-graphite technology, experimentally demonstrate the feasibility of this reactor complex and extend its performance limits, and apply in information developed to designs suitable for the full-scale nuclear power plant. As a principal part of this program, a Sodium Reactor Experiment (the SRE) is to be constructed and operated; it will be the major experimental facility in which the performance of this reactor will be studied and new technological advances tested. This report continues an earlier series 2-7 in which previous work on the SGR and the SRE has been described. In this report, the progress on the program is described in two main sections. Section A is devoted to work relating to the general technology of Sodium Graphite Reactors, and to …

Technical report with short reports covering (1) Effect of radiation on water and aqueous systems; (2) Effect of neutrons on graphite; (3) Effect of radiation on solid compounds; and (4) Scattering, stopping-power, ion-pair production, etc.

Abstract. thorium can be precipitated as a salt of p-dimethylaminoazophenylarsonic acid at a pH of about 1.5. the precipitate, collected on a sintered glass filter is washed with dilute ammonium hydroxide to dissolve the dye. the amount of thorium is determined by measuring the concentration of the dye spectrophotometrically at a wavelength of 450 millimicrons. Zirconium, which interferes, can be separated and determined using the same reagent in strong hydrochloric. the behavior of thorium metal upon treatment with various acids and upon fusion withKHSO4 is described. three satisfactory procedures are given for dissolving the metal with sulfuric acid, phosphoric acid, and by a potassium hydrogen sulfate fusion. The laboratory was presented with the problem of analyzing for a large number of elements in O2 metal. the results of a systematic study of methods for effecting solution of the metal are offered here since they may be of some interest and use to other laboratories. The four methods which effected complete solution of the metal are (1) Sulfuric acid method; (2) Fusion method; (3) Phosphoric acid method; and (4) Nitric acid-hydrofluoric acid method.

From Abstract : "The thermal diffusivities of pure silicon and of Armco iron have been measures from 300 to 1400°K. The specific heats of the same materials have been measured over the same temperature range."

Abstract. Thorium peroxide was precipitated from thorium nitrate solutions containing varying amounts of sulfate ion and of hydrogen ion. The washed solids were analyzed both wet and dry. Analyses were made for thorium, peroxide oxygen, sulfate, nitrate, and water contents. X-ray powder photographs of the dried samples by W.H. Zachariasen showed the presence of only two phases. When precipitated from high sulfuric acid, the solid phase was isomorphous with Th(OO)SO4.3H20. More weakly acid solutions whose sulfate content was varied over wide limits [SO4--/Th(IV) (in solution before precipitation) = 0.005 to 67.0] yielded a solid, isomorphous with thorium peroxide nitrate and containing 3.0 to 3.8 peroxide oxygen atoms for each thorium atom. The sulfate content of this latter phase varied continuously between the limits SO4--/Th(IV) = 0.34 to 0.01 with nitrate ion present when the sulfate content was very low. This continuous variation in composition is in agreement with the previously proposed structure of this phase.

The following document is a compilation of quarterly reports from August 1946 to November of 1947 from the Biology Division of the University of Chicago.

The following documents were compiled into a quarterly report that was to be published in the Radiobiology Volume of the PPR. The following reports provide data from the Biology department of the University of Chicago between May and August of 1947.

Report discussing the results of an investigation of a test for statistical consistency of counter-scaler units.

Introduction: Measurements of polonium content in solids are usually performed by dissolving the material and preparing a thin sample which can be measured with one of the available instruments. A measurement of the radiation emerging from the thick sample should be sufficient to evaluate the polonium content. For this reason a calculation has been performed and the results have been compared with those obtained by the thin sample method. Obviously this proposed method using thick samples would be faster.

Abstract: "Tests have been developed for both the qualitative detection and quantitative determination of fluorine in chlorine. The qualitative test is made by passing the gas through manganous chloride. If the pink solid tubes brown there is greater than 0.5 percent of fluorine in the gas. The quantitative test is a modification of the Steiger and Marvin Test with oxidized titanium solution."

The following report covers the literature available in the Battelle library as well as the Atomic Energy Commission (New York, N.Y.) on the processing of monazite sands for thorium and rare earth contents.

The following report follows a complete radiochemical analysis that has been made on the sample of first-cycle neutralized waste, as well as a gravimetric analysis made on the sludge in the sample of first-cycle waste.