'The authors have begun to examine the extraction and recovery of heavy elements from aqueous waste streams using redox-active metal chalcogenides. They have been able to prepare extractants from known chalcogenide starting materials, studied the efficacy of the extractants for selective removal of soft metal ions from aqueous phases, studied the deactivation of extractants and the concomitant recovery of soft metal ions from the extractants, and characterized all of the solids and solutions thus far in the study. The study was proposed as two parallel tasks: Part 1 and Part 2 emphasize the study and development of known metal chalcogenide extractants and the synthesis and development of new metal chalcogenide extractants, respectively. The two tasks were divided into sub-sections that study the extractants and their chemistry as detailed below: Preparation and reactivity of metal chalcogenide host solids Extraction of target waste (guest) ions from simulated waste streams Examination of the guest-host solids recovery of the guest metal and reuse of extractant Each section of the two tasks was divided into focused subsections that detail the specific problems and solutions to those problems that were proposed. The extent to which those tasks have been accomplished and the continued efforts of the …

The authors have measured production fractions and spectra for {pi}{sup {+-}}, K{sup {+-}} and p, and production spectra for K{sup 0} and {Lambda}{sup 0} in both hadronic Z{sup 0} decays and a Z{sup 0} {yields} light quark (uds) subset at SLD. The SLD Cherenkov Ring Imaging Detector was used to identify charged hadrons. The CCD vertex detector was used to select the enriched uds sample. For the global sample, the results are consistent with previous experiments. The authors observe a clear flavor dependence in production spectra, but only a small effect in hadron fractions and {xi} = ln(1/x{sub p}) peak positions.

'Mercury and other highly-toxic heavy metals such as cadmium and lead are present in many aquatic environments, and the remediation of such environments or the avoidance of heavy-metal contamination in the first place is an area of active interest. In recent years tougher environmental regulations and the high initial cost of new, more effective, and more selective extractants has made the reuse of extractant materials and the minimization of secondary waste volume a focus of their scientific effort. The authors research has involved the investigation of redox-active layered metal chalcogenides as selective, effective, and redox-recyclable extractants for heavy metals from aqueous solution.'

'The mobility of actinides in surface soils is a key issue of concern at several DOE facilities in arid and semiarid environments, including Rocky Flats, Hanford, Nevada Test Site, Idaho National Engineering Laboratory, and Los Alamos National Laboratory and the Waste Isolation Pilot Plant (WIPP). Key sources of uncertainty in assessing Pu mobility are the magnitudes of mobility resulting from three modes of transport: (1) wind erosion, (2) water erosion, and (3) vertical migration. Each of these three processes depend on numerous environmental factors and they compete with one another, particularly for actinides in very shallow soils ({approximately} 1 \265m). The overall goal of the study is to quantify the mobility of soil actinides from all three modes. The authors study is using field measurements, laboratory experiments, and ecological modeling to address these three processes at three DOE facilities where actinide kinetics are of concern: WIPP, Rocky Flats, and Hanford. Wind erosion is being measured with suite of monitoring equipment, water erosion is being studied with rainfall simulation experiments, vertical migration is being studied in controlled laboratory experiments, and the three processes are being integrated using ecological modeling. Estimates for clean up of soil actinides for the extensive tracts of …

The attached reports and proposal summarize the work to date for the revised Ultrasonic Resonance Interferometry system. The most recent set of experiments, to determine the accuracy of the implementation of a new calibration curve to account for the variation of the wave speed with temperature, were never completed due to lack of funding. The general focus of the ongoing work, outlined in the weekly reports, had been improvements in accuracy of the measurement system using software modifications. The future focus of the project, as outlined in the attached proposal, was to incorporate a thermal conductivity probe with the ultrasonic measurement system to allow measurement of fluids which have a bimodal wavespeed vs. molarity relation.

The authors present an improved comparison of the strong couplings of gluons to light (u, d, and s), c, and b quarks, determined from multijet rates in flavor-tagged samples of hadronic Z{sup 0} decays recorded with the SLC Large Detector at the SLAC Linear Collider between 1993 and 1995. Flavor separation on the basis of lifetime and decay multiplicity differences among hadrons containing light, c, and b quarks was made using the SLD precision tracking system, yielding tags with high purity and low bias against {ge} 3-jet final states. They find: {alpha}{sub s}{sup uds}/{alpha}{sub s}{sup all} = 0.997 {+-} 0.011(stat) {+-} 0.011(syst) {+-} 0.005(theory), {alpha}{sub s}{sup c}/{alpha}{sub s}{sup all} = 0.984 {+-} 0.042 {+-} 0.053 {+-} 0.022, {alpha}{sub s}{sup b}/{alpha}{sub s}{sup all} = 1.022 {+-} 0.019 {+-} 0.023 {+-} 0.012.

The authors have measured production rates as a function of momentum of the identified hadrons {pi}{sup +}, K{sup +}, K{sup 0}, K*{sup 0}, {phi}, p, {Lambda}{sup 0} and their antihadrons in inclusive hadronic Z{sup 0} decays, as well as separately in decays into light, c and b flavors. In addition they have compared hadron and antihadron production rates in light quark (rather than antiquark) jets. The SLD Cherenkov Ring Imaging Detector was used to identify charged hadrons. The vertex detector was used to tag high-purity samples of light- and b-flavor events. The electron beam polarization was used to tag samples of quark and antiquark jets. Clear flavor dependences are observed, consistent with expectations based upon measured production and decay properties of heavy hadrons. They use the light-flavor results to test the predictions of MLLA QCD and of various fragmentation models. Differences between hadron and antihadron production in light quark jets are observed at high momentum fraction, providing direct evidence that higher-momentum particles are more likely to contain a primary quark or antiquark, and they use these results to make a new direct measurement of strangeness suppression in the jet fragmentation process.

The treatment for some thyroid carcinomas involves surgically removing the thyroid gland and administering the radiopharmaceutical Sodium iodide-{sup 131}I (NaI). A diagnostic dose of NaI is given to the patient to determine if remnant tissue from the gland remains or larger doses are administered in order to treat the malignant tissue. Past research regarding NaI uptake and retention in euthyroid individuals (normal functioning thyroid) reveal that radioiodine concentrates mainly in the thyroid tissue and the remaining material is excreted from the body. The majority of radioiodine in athyroid (without thyroid) individuals is also eliminated from the body; however, there has been recent evidence of a long-term retention phase for individuals with no radioiodine concentrating tissue. The general purpose of this study was to develop a kinetic model and estimate the absorbed dose to athyroid individuals regarding the distribution and retention of NaI.

Three laser research programs are proposed: (1) to find new laser systems in the wavelength region between 2000 and 4500 A; (2) to attempt scaling lasers to high output power; and (3) to focus research on metal vapor laser systems which have promise of high efficiency. Twenty-eight new laser transitions from Cu II spanning the wavelength region from 2486 to 7988 A have been observed. A list of papers and conferences are given that summarize the metal vapor laser research. (TFD)

None

None

None

The 1,1-reductive elimination of ethane from three cis-bis(phosphine)-dimethylpalladium complexes, L/sub 2/Pd(CH/sub 3/)/sub 2/ (L = PPh/sub 3/, PPh/sub 2/,CH/sub 3/ and L/sub 2/ = Ph/sub 2/PCH/sub 2/CH/sub 2/PPh/sub 2/), and three trans analogs (L = PPh/sub 3/, PPh/sub 2/CH/sub 3/ and L/sub 2/ = 2,11-bis(diphenylphosphinomethyl)benzo(c)phenanthrene (TRANSPHOS)) was carried out. The three cis complexes underwent reductive elimination in the presence of coordinating solvents (DMSO, DMF, and THF). The trans complexes which could isomerize to cis (L = PPh/sub 3/, PPh/sub 2/CH/sub 3/) did so in polar solvents and then underwent reductive elimination. TRANSPHOS dimethylpalladium would not undergo reductive elimination of ethane. The eliminations from the cis isomers were intramolecular and displayed first order kinetics. Although TRANSPHOS dimethylpalladium(II) would not undergo a 1,1-reductive elimination of ethane, the addition of CD/sub 3/I to a DMSO solution of this complex at 25/sup 0/C rapidly produced CD/sub 3/-CH/sub 3/, implicating a transient palladium(IV) intermediate. E- and Z-bromostyrylbis(diphenylmethylphosphine)palladium(0) react with methyl lithium in THF at ambient temperature to give the E- and Z- propenylbenzenes, respectively. At -78/sup 0/C, the intermediate E- and Z-styrylmethylbis(diphenylmethylphosphine)palladium(II) complexes (9a,b) can be isolated. On raising the temperature of solutions of 9a,b in THF, E- and Z-propenylbenzenes are produced. The reductive elimination …

An attempt was made to relate episodes of air pollution at Barrow, Alaska, containing vanadium, to the behavior of planetary waves in middle and high latitudes. A stationarity index for planetary waves is defined as the ratio between amplitudes computed from monthly mean maps and the mean amplitudes computed on a daily basis and averaged over the same month, irrespective of phase angle. Longitude-time sections of 500-mb height anomalies at various latitudes are related to vanadium pollution episodes at Barrow.

It is considered that the short term stability of n-GaAs PEC's in a ferrocene-based, ambient temperature molten salt electrolyte is reasonably good. However, longer term evaluation is required to determine the extent and significance of corrosion, stability, etc. Extremely few fundamental studies have been made of the semiconductor/molten salt interphase and experiments in this area would be most useful. Indeed, even the design parameters for PECs of any kind have not been quantitatively delineated and present consideration will be given to models for PEC solar cells and limitations caused by ion transport in the electrolyte. The MoSe/sub 2/ and MoS/sub 2/ electrodes appear to have substrate reproducibility and transport limitations that make them unsuitable candidates for efficient PEC's at this time. Similarly, the lack of availability of high quality CuInSe/sub 2/ and CuInS/sub 2/ substrates limits the quantitative experimental evaluation of their utility for PEC applications. We are presently focusing attention on CdSe/CdTe mixtures and CdS as electrodes as well as Si and GaAs in molten salt and polyelectrolyte solutions. The system for solar cell evaluation and network analysis of substrates and cells was mode operational. Preliminary work on economic and theoretical modelling was begun. Progress is reported. (WHK)

A large component of radon entry cannot be explained by pressure differences between the soil and inside the structures. The persistence of this radon entry even when the house is pressurized by 1 Pa indicates that it must be due to molecular diffusion. The radon entry rate as measured by accumulators below ground level (soil + concrete) is roughly 2 times greater than that measured above ground level (concrete alone). The soil permeability is about 10{sup {minus}12} m{sup 2} and does not change dramatically with depth down to 2 m. The diffusion component of radon entry is reduced by about 30% when the floor wall joint is sealed. The Rn3D model is operating on our computer system and is being modified to accommodate the geometrical configurations of the underground test structure.

Characteristics of the oceanic mixed layer over the North Pacific were examined utilizing a number of statistical methods. Based on the analyses of twelve years of data, a quasi-meridional differentiation (QMD) in sea surface temperature (SST) spectra across the North Pacific was observed. The SST spectra became increasingly red as an increasing function of latitude. A strong 21 to 26 day cycle in SST anomalies is discussed which may be a reflection of heat fluxes. These fluxes also vacillate significantly on this time-scale in conjunction with cycles observed in the atmospheric energy modes of available potential and kinetic energy. Examination of an oceanic heat budget on a spatial and temporal basis suggest that the impact of latent and sensible heat fluxes upon ..delta..SST is partially a function of the magnitude of the heat fluxes as well as of the depth to which their effects are mixed. The heat budget analyses and the fitting of power spectra of SST anomalies over the North Pacific to a two-parameter oceanic model, suggest that SST behavior over the mid-oceanic regions of the North Pacific is dominated by the influence of latent and sensible heat fluxes. On the other hand, over the remainder of the …

Cross-spectral analysis is used to examine the dependence of the temporal covariation of sea-surface temperature (SST) anomalies at pairs of spatially separated points in the North Pacific on (1) the time scale of the variations, (2) the relative displacement of the points and (3) their location within the North Pacific basin. Spatial scales considered here range from 1000 kilometers up to the width of the basin. The study focuses on cross-spectral estimates for the interannual frequency band, 0.125-0.75 yr/sup -1/ although estimates for three other bands spanning higher frequencies are also examined.

Extrusion and rolling processes exhibiting large amounts of plastic flow are analyzed using a finite element technique that is based on a modified creeping viscous flow approximation. The technique, called the initial stress-rate method, iteratively corrects creeping viscous flow solutions to generate results that include elastic response. The momentum equations have been coupled with the energy equation to provide the capability to predict thermomechanical response during forming operations.

Efforts have been primarily directed toward evaluation of the room temperature molten salt electrolyte in terms of its overall performance for photovoltaic cells. Mass transport processes may prove to be the rate-limiting factor for such electrolytes, unless the concentration of the photo-active redox component can be increased and the solvent viscosity reduced. Acid-base surface chemistry of n-GaAs as occurs in aqueous systems, has been found present and its consequences will be further explored. The selection and optimization of PEC electrolytes is a complex task and we believe that a systems approach would facilitate in identifying the basic electrolyte properties needed. A preliminary analysis reveals that although some of the criteria for an electrolyte are definable precisely, others do require empirical experimentation. It can be concluded that relatively few electrolytes in current use are adequate and it would appear that greater efforts to develop electrolytes would be advantageous. The various types of electrolytes that could be used for PEC's have been identified. Good quality MoSe/sub 2/ single crystals can be grown and short circuit currents greater than previously reported have been achieved in an I/sub 2//I/sup -//Pt cell. A novel technique to produce photo-active films by anodization is being investigated, initially …

We are making progress on our investigation of the mechanism of olefin exchange with Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8}. We are probing this system by kinetic study of the reaction of Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8} with butyl acrylate (BA) under various pressures of ethylene.

Strong free convection airflows occur within passive solar buildings resulting from elevated temperatures of surfaces irradiated by solar energy compared with the cooler surfaces not receiving radiation. The geometry of a building has a large influence on the directions and magnitudes of natural airflows, and thus heat transfer between zones. This investigation has utilized a variety of reduced-scale building configurations to study the effects of geometry on natural convection heat transfer. Similarity between the reduced-scale model and a full-scale passive solar building is achieved by having similar geometries and by replacing air with Freon-12 gas as the model's working fluid. Filling the model with Freon-12 gas results in similarity in Prandtl numbers and Rayleigh numbers based on temperature differences in the range from 10/sup 9/ to 10/sup 11/. Results from four geometries are described with an emphasis placed on the effects of heat loss on zone temperature stratification shifts.

This report presents the results of wind-tunnel tests supported through the Solar Energy Research Institute (SERI) by the Office of Solar Thermal Technology of the US Department of Energy as part of the SERI research effort on innovative concentrators. As gravity loads on drive mechanisms are reduced through stretched-membrane technology, the wind-load contribution of the required drive capacity increases in percentage. Reduction of wind loads can provide economy in support structure and heliostat drive. Wind-tunnel tests have been directed at finding methods to reduce wind loads on heliostats. The tests investigated primarily the mean forces, moments, and the possibility of measuring fluctuating forces in anticipation of reducing those forces. A significant increase in ability to predict heliostat wind loads and their reduction within a heliostat field was achieved.

We have obtained a neutron diffraction data set for Os{sub 2}(CO){sub 8}({mu}-C{sub 2}H{sub 4}). While the structure is still being solved, it is already clear that the hybridization at both of the ethylene carbons is sp{sup 3}. Our first interpretation of our liquid crystal NMR results had suggested a very acute H-C-H angle. We have also obtained {sup 13}C liquid crystal data for Os{sub 2}(CO){sub 8}({mu}-C{sub 2}H{sub 4}). Liquid crystal NMR ({sup 13}C as well as {sup 1}H) spectra have been obtained for Os(CO){sub 4}(C{sub 2}H{sub 4}) and its solution structure determined, in order to test our methodology on a molecule with a rigid structure. The normal modes of Os(CO){sub 4}({mu}-C{sub 2}H{sub 4}) and its deuterated and {sup 13}C-labelled isotopomers have been completely assigned. A partial vibrational analysis of Os{sub 2}(CO){sub 8}({mu}-propene), Os{sub 2}(CO){sub 8}(trans-2-butene), and Os{sub 2}(CO){sub 8}(1-butene) has been completed. We have prepared Os(CO){sub 4}({mu}-CH{sub 2}CH{sub 2}CH{sub 2}) and its 3,3-dideuterio analog. In the course of this work the reaction of Na{sub 2}Os(CO){sub 4} with a number of 1,3-propanediol derivatives has been examined. 1,3-Propanediol ditosylate afforded much better yields of the osmacycle than did either the ditriflate or diiodide. 2,2-Dideutero-1,3-propanediol ditosylate was used to prepare the deuterium-labelled osmacyclobutane.