Report issued by the U.S. Bureau of Mines on the West Belt copper-zinc mines. The properties and characteristics of the mineral composition are presented. The report includes tables and maps.

This report has two parts to it discussing mineralogical examination of pitchblende concentrates and nitric acid digest residues. Part I gives the results of a cursory examination with the petrographic microscope of samples of pitchblende concentrates and residues to see if there is a relationship between the mineral composition of the samples and the filterability of the residue. Part II gives a revaluation of the data in Report BMI-241 on the mineral composition of two residues from the nitric acid digestion of pitchblende concentrates at the Rallinckrodt Chemical Works.

From introduction: This preliminary report summarizes the results of the 1950 drilling in the Legin group area of San Miguel County, Colorado and gives a more complete, but preliminary, estimate of the uranium and vanadium ore reserves. When the radiometric and chemical assay data are completed, a detailed report will be transmitted.

From abstract: During the month of May 1950, the Davison Chemical Corporation, under contract with the Atomic Energy Commission, drilled 24 phosphate prospecting holes in the western part of the Bonny Lake mine, in the SW NW4 and the NW*SW4 sec. 32, T. 29 S., R. 24 E., Polk County, Fla. The purpose of this drilling was to obtain a comparison between tonnage and grade of uranium in the phosphate as indicated by prospecting, and the tonnage and grade of uranium in the phosphate products recovered in the mill. The results presented in this paper are based upon a study of drill cores, drill logs, gamma-ray logs, and the chemical analyses of drill-core samples.

From abstract and summary: The Blue and Moon Mesa areas are about 13 miles southeast of Gateway, Mesa County, Colo. Total production of carnotite ore from the Blue and Moon Mesa areas has been about 1,000 short tons that averaged about 0.25 percent U30Oand 1.75 percent V205. Most of this production was obtained from 1940 to 1943 and in 1949. The U. S. Geological Survey explored the northern parts of these areas by diamond drilling between August 9 and December 14, 1950. The Survey drilled 113 holes, totalling 16,039 feet. This drilling was mostly wide-spaced and was done to obtain geologic information.

Technical report outlining the rate of production of modified MTR type fuel elements for the Bulk Shielding Facility has proceeded. Includes compatibility test that were started as a guide in the selection of materials suitable for fuel-element fabrication. [From Summary]

Technical report detailing expansion of the Aircraft Nuclear Propulsion at the Oak Ridge National Laboratory. Major facilities completed at this time were the Shielding Rector, the ANP Critical Facility, and the 86-in. Cyclotron. Outlines further need for radiation damage studies. [From Summary]

Technical report describing the tests on types 309, 316, and 347 stainless steel. These steels were tested for a total of 779 to 828 hours in three different synthetic waste solutions. Results shoe that the best all-around corrosion resistance to the test conditions was exhibited by 316 stainless steel, but in one solution 347 stainless steel was more resistant. [From Abstract]

The effect of temperature on the properties of graphite is being determined by exposing samples to pile neutrons at controlled temperatures in the range 75 C to 225 C. The first series of samples were charged into the newly installed dry, water-cooled test channel at B pile on January 23, 1951. This report presents details of the charging operation and observations noted during the initial operation of the test.

It is the purpose of this document to record the significant steps in the removal of a ruptured slug from tube {number_sign}2562-H.

This is a progress report of the production reactors on the Hanford Reservation for the month of January 1951. This report takes each division (e.g. manufacturing, medical, accounting, occupational safety, security, reactor operations, etc.) of the site and summarizes its accomplishments and employee relations for that month.

None

None

Minor changes in materials and methods resulted in increased yields in the production of fuel elements for the Bulk Shielding Facility. Attempts to bond uranium to a mercury-- silver alloy resulted in bonds of insufficient strength. Thorium alloys containing 2 to 4% Nb. Cr. Mn, Ti, Zr, Be. Al, and Si were prepared. The alloys containing Be, Al. or Si were hard, brittle, and not cold-workable. The alloys containing the other elements were coldworkable in the as-cast condition. Impact testing of pure thorium, using standard V-notch specimens, revealed a transition from brittle to tough behavior at 120 to 200 deg C. The determination of UAL/sub 4/: UAL/sub 3/ ratios, lattice parameters, and microstructures for the Al--Si--U system is reported. It was found that for a 20% uranium alloy, only 0.8% Si is necessary to completely suppress the formation of UAL/sub 4/. In general, ferritic iron--chromium alloys appeared more resistant to static corrosion by 1000 deg C lithium and lead than did austenitic alloys. Compatability tests with combinations of Mo, UO/sub 2/ BeO, Nb, and stainless steels 309 and 316 are discussed. True stress-natural strain-time diagrams for copper at room temperature are presented. (See also ORNL-2839.) (C.J.G.)

None

Report documenting the suitability of Georgia for plant locations to produce synthetic liquid fuels, based on raw materials such as coal, natural gas, oil shales, and oil-impregnated strippable deposits.

Report documenting the suitability of North Carolina for plant locations to produce synthetic liquid fuels, based on raw materials, water sources, and local interest.

None

None

None

The following document reports the process of the recovery and decontamination of uranium using pentaether as the solvent extraction agent in a continuous flow system.

Report issued by the U.S. Bureau of Mines on the oil-shale reserves near the Green River formation. Samples are analyzed for economic value, and presented in tables and illustrations. The report also includes maps of the sample areas.

Note presenting comparisons of the low-speed experimental lift and hinge-moment parameters of flapped lifting surfaces with and without sweepback with values computed by several theoretical procedures. Based on these limited results, one theoretical method appears to be more satisfactory than the other methods investigated and is therefore recommended fore preliminary design estimates. Sample calculations are included.

"The sandwich plate consisting of corrugated sheet fastened between two face sheets is considered. Application of existing theories to the analysis of such a sandwich plate requires the knowledge of certain elastic constants. Formulas and charts are presented for the evaluation of these constants" (p. 1).