Fourth part of the "final report of a study directed toward the evolution, design, and demonstration of the principle design features of interim indirect cycle water cooled and moderated nuclear power plants which will be useful in early cooperative programs between the Atomic Energy Commission and the United States maritime industry" (p. i).

Report presenting research and development papers from the Oak Ridge National Laboratory's Analytical Chemistry Division.

Report documenting the ongoing research and developments of the Chemical Technology Division of the Oak Ridge National Laboratory.

The intent of this work was to explore more fully the pressing of sinterable UO2 powders into cylindrical compacts in the hope that a more precise prediction of green density in terms of powder properties, pressure, and geometry could be evolved.

Abstract: This technical report elucidates principles of hazards evaluation. The concept of hazards potential is introduced and utilized to show how a reactor system perturbation will influence its nuclear safety. Literature relating to reactor safety is referenced to provide the sources of information required for hazards analysis and show how they influence a hazards evaluation. A checklist of items which should be considered in evaluating a change, test, or modification is presented.

Abstract: This technical report presents design criteria to prevent the brittle fracture of ferritic reactor vessels that cold occur as a result of the rise in NDT caused by fast neutron irradiation. The criteria require that maximum principal stress in the vessel does not exceed 18 percent of yield stress at temperatures below NDT + 60 degree F. Under certain conditions the allowable stress may be based on the irradiated yield stress. A discussion of brittle fracture and an explanation of the criteria are included.

From abstract: "The design, fabrication, and irradiation results are described for a 0.028 inch thick 304 stainless clad fuel element (SH-4B) exposed in the Vallecitos Boiling Water Reactor loop under superheat conditions."

Report describing a 300-Mw(e) Supercritical Pressure Power Reactor's facilities, physics, economics, and problems encountered during its development. Appendix begins on page 103.

Report describing the status of the SM-1, SM-1A, and PM-2A reactors, specifically regarding the effects "of irradiation on nil-ductility transition temperature and the associated problem of brittle fracture." (p. iii)

This report consists of the description, drawings, connections, and schematics of the various control elements that make up the control system of the Engineering Test Reactor Critical Facility (ETRC).

Report discussing the evaluation of the "behavior of austenitic and ferritic stainless steels, iron-chromium-aluminum base alloys and nickel-base superalloys, in medium and high temperature simulated reactor environments" (p. 2).

Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the research and development program for the United States Atomic Energy Commission sodium Components Design Project.

Report regarding the structural evaluations made of the upper head of the Experimental Gas Cooled Reactor (EGCR). This report includes descriptions of the model, experimental procedures, and analyses of the results. Appendix begins on page 139.

Abstract: This technical report contains a summary of analytical and experimental work performed on SM-1 Core II, with special components is presented. The effects of these special assemblies upon power distribution and core reactivity were calculated and compared to experimental measurements. A thermal analysis was conducted to determine steady state and transient performance of the special test components of the core as well as some of the hotter standard Core II components. Experimental work discussed includes individual reactivity effects of all the special elements and the total effect of all of the elements. Power mappings were also made and are reported.

Abstract: This technical report contains a description and results of a second series of critical experiments performed on the SM-2 core mock-up, as additional to the first series of experiments reported in APAE No. 54. The SM-2 core mock-up contains 36.4 kg U-235 and and estimated 67.9 gm B-10. The equivalent diameter and the active height are about 22 in.; the metal-to-water volume ration is 0.344. Data is presented on activation, reactivity, and stuck rod measurements. All measurements were conducted on the open seven control rod array employing 38 stationary fuel elements. Activation measurements consisted of neutron flux measurements using uranium fission foils for relative power distribution studies, the effect of flux suppressors on reducing power peaks, blocked coolant channel measurements, and gamma ray dose distribution. Reactivity measurements were performed to determine the effect f flow divider, flux suppressors and stimulated high temperature and pressure operation; b-10 loading in the SM-2 core; and core material coefficients. For the later, the worth in cents per gm or cents per cc was determined at simulated temperature of 510 degree F for B-10, U-235, stainless steel, and void. Stuck rod measurements were made to obtain an indication of the criticality margin in the …

From introduction: "The purpose of this report is to present the details of the exploratory and developmental work on tandem rolling, and the subsequent fabrication of tandem rolled fuel rods for irradiation testing in the Vallecitos Boiling Water Reactor."

Report describing tests "in which a double chambered irradiation capsule containing NaK (sodium-potassium alloy) in its inner chamber was deliberately perforated to allow NaK (the heat transfer medium) and water to react within the capsule chambers" (p. 2). The report includes descriptions of the materials used in the tests, test procedures, and results.

Report describing the performance, fission product tolerance, design, and costs of the DR-1 Gas Loop, which is an in-reactor test facility.

Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data on completed fuel elements. The importance of in-line sampling for monitoring fission product activity is stressed as well as the need for failed fuel element detection methods.

Abstract: This technical report describes the as-constructed SM-1 penetrated gasket designed for SM-1 Core and Flow Instrumentation (Task XIV). This report supplements APAE No. 79, The Summary Hazards Report for Task XIV, and evaluates the effects of a postulated failure of this gasket. The effects of failure on the Maximum Credible Accident are determined and conclusions and recommendations for the use of this gasket are made.

Abstract: This technical report describes the Martin Co. PM-1-M-2 test element and analyzes the potential hazard incurred by its inclusion in the SM-1 Core II. A nuclear analysis develops power distributions and reactivity effects. Hydraulic and thermal analyses develop anticipated burnout heat flux ratios. An evaluation of the risk involved with the inclusion of this element is presented. In view of the narrow margin by which the PM-1-M-2 test element meets the minimum burnout ratios as defined by Alco Products, Inc., it is recommended that if time permits that critical facility design verification be accomplished. The PM-1-M-2 test element meets the minimum requirements for insertion in SM-1 Core II and in view of the importance of this element to the PM-1 and PM-3A program, should be considered for insertion.

Abstract: The removal of both SM-1 Core I high burnup elements from the SM-1 Core II and the insertion of two SM-1 Core I spare elements i their places are discussed. Nuclear and thermal characteristics of Core II with the change are presented and conclusion related to the change in hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative estimate of core safety. There is no conceivable reason why this perturbation may not be safely made in the SM-1 Core II.

Abstract: The removal of both SM-1 Core I high burnup elements from SM-1 Core II and the insertion of the PM-1-M-2 element and the SM-1 Core I spare element in SM-1 Core II is discussed. Nuclear and thermal characteristics of Core II with these changes are presented and conclusions related to the changes in the hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative estimate of core safety. There is no conceivable reason why the perturbation may not be safely made in the SM-1 Core II.

Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II and special components. The special components consist of impact specimens, a boron gradient rod, SM-2 elements, a PM-1-M element, and high burnup SM-1 Core I elements. The change in hazards, due to operation of SM-1 with Core II and the special components is evaluated. The analysis indicates there is no change in hazards.