Technical report detailing expansion of the Aircraft Nuclear Propulsion at the Oak Ridge National Laboratory. Major facilities completed at this time were the Shielding Rector, the ANP Critical Facility, and the 86-in. Cyclotron. Outlines further need for radiation damage studies. [From Summary]

Technical report covering experiments happening on the Analytical Chemistry Division's sites at the Oak Ridge National Laboratory. Includes information on ionic analyses, radio-chemical analyses, spectrochemical analyses, service analyses, inorganic preparations, analytical chemical control of homogeneous reactor solution, optical and electron microscopy, and service analyses for the period ending March 26, 1951. [From Abstract]

Technical report covering experiments happening on the Analytical Chemistry Division's sites at the Oak Ridge National Laboratory. Includes information on ionic analyses, radiochemical analyses, spectrochemical analyses, service analyses, inorganic preparations, analytical chemical control of homogeneous reactor solution, optical and electron microscopy, and service analyses. [From Abstract]

Report issued by the Oak Ridge National Laboratory discussing aqueous homogeneous reactors used in central-station power. As stated in the introduction, "it contains an evaluation of the potentiality of producing power only, as exhibited by aqueous homogeneous systems" (p. 6). This report includes tables, and illustrations.

Technical report detailing kinetic equations that have been developed for a boiling-type reactor and inherent reactor stability studies that have been made on the basis of these equations. Presents features of the proposed reactor, comparisons of circulating types, investigations of bubble-rise velocities, effects of transient conditions of vapor mass in steam chest, and bubble time delay functions yield favorable results. [From Abstract]

Technical report outlining cavity-type ionization chambers with graphite walls that are used to measure heat dissipation in the graphite reflector of the MTR mock-up. Studies the relationship between the ionization occurring in the chamber and the heat generated in the surrounding graphite medium. [From Abstract]

Technical report presenting a summary of the flowsheets, equipment, and progress for the Oak Ridge National Laboratory (ORNL) pilot plant development of the Purex Process and of the ORNL Metal Recovery Program. As of this report, conversion of the Purex pilot plant equipment in Buildings 3019 and 3503 is 90% complete. The building structure for the ORNL Waste Metal Recovery plant had been completed, and 15% of the process equipment had been installed. The first hot runs for this plant were scheduled for June, 1951. [From Abstract; Introduction]

Quarterly technical report including reports on chemistry of source, fissionable, and structural elements, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, and instrumentation. [From Abstract]

Quarterly technical report including reports on chemistry of source, fissionable, and structural elements, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, and instrumentation. [From Abstract]

Technical report covering chemistry of source, fissionable, and structural elements, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, and instrumentation at the Oak Ridge National Laboratory for the period ending September 30, 1950. [From Abstract]

This quarterly progress report discusses topics of research and experimentation at the Oak Ridge National Laboratory, including inorganic chemistry, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, chemistry of the solid state, instrumentation, reactor chemistry.

Technical report describing the tests on types 309, 316, and 347 stainless steel. These steels were tested for a total of 779 to 828 hours in three different synthetic waste solutions. Results shoe that the best all-around corrosion resistance to the test conditions was exhibited by 316 stainless steel, but in one solution 347 stainless steel was more resistant. [From Abstract]

From abstract: "The probability for a fission neutron to escape fast leakage from bare, hydrogen moderated reactors is calculated by a method utilizing only the microscopic cross section of the materials. These results can be employed to determine the effectiveness of other substances in preventing fast neutron leakage. These calculations are carried out for aluminum and iron."

Technical report outlining how uranium hexaflouride was prepared be the direct combination of irradiated uranium metal with elemental fluorine and subsequently decontaminated by adsorption, filtration, and sublimation on a laboratory scale. Report proposes a survey of other methods of preparing UF6 from uranium metal, a study of adsorption techniques for removing plutonium from UF6, and an investigation of fractional distillation for removing the volatile fission product fluorides from UF6. [From Abstract, Summary]

Technical report detailing corrosion tests of Type 347 stainless steel for two weeks in boiling uranyl nitrate, sulfuric acid media, with and without additions of Al+3 and F-1 in a 2:1 mole ratio. The results of these tests show that although the presence of aluminum greatly reduces the deleterious effect of fluoride, the corrosion rates are still three to four times greater than when no fluoride is present. [From Abstract]

From abstract: "Neutron-irradiated uranium was electromagnetically separated to provide enrichment of the isotope of mass 236. The final isotopic abundance of U 236 was determined to be 95% in 1800 milligrams of uranium. Useful by-products of the program were 22 grams of 25% U 236 and 1100 grams of 99.7% U 235. These enriched materials have been made available for use on Atomic Energy Commission projects. Possible application of this separation process to recovery of the fuel from the MTR reactor is described."

From abstract: "Neutron-irradiated uranium was electromagnetically separated to provide enrichment of the isotope of mass 236. The final isotopic abundance of U 236 was determined to be 95% in 1800 milligrams of uranium. Useful by-products of the program were 22 grams of 25% U 236 and 1100 grams of 99.7% U 235. These enriched materials have been made available for use on Atomic Energy Commission projects. Possible application of this separation process to recovery of the fuel from the MTR reactor is described."

Technical report containing the general arrangement of the Low Intensity Training Reactor and outcomes of experiments that have been performed in the reactor to measure the rate of fission product heat dissipation from the fuel pieces after loss of water. [From Summary, Introduction]

Air filter and rainwater collections of atmospheric fall-out were made at Atlanta, Georgia; Urbana, Illinois; Topeka, Kansas; Fort Worth, Texas; and Nashville, Tennessee. Collections reflect the effects of the radioactive cloud from the Nevada tests.

Technical report covering the Homogeneous Reactor Experiment (HRE) reactor physics and engineering, out-of-pile corrosion, in-pile studies, recombination of hydrogen and oxygen, HRE chemical studies, experimental programs for the HRE, and long-range studies. [From Summary]

Technical report acting as a detailed progress report on all homogeneous-reactor-motivated work at the Oak Ridge National Laboratory (ORNL). Includes work of the Homogeneous Reactor Experiment, the long range research programs associated with aqueous-fluid fuel systems. [From Foreword]

Technical report outlining the reconstitution of the Homogeneous Reactor Experiment Project (HRE) as the Homogeneous Reactor Project. Report covers the need for a broader developmental program to establish the feasibility of obtaining the potential advantages of homogeneous reactors for the production of fissionable materials and power. Details the ultimate objective of the ORNL program to provide the technical information required to determine the feasibility of a full scale plutonium power producing homogeneous reactor. [From Summary]

From abstract: "The rate of hydrolysis of TBP and the effect of the hydrolysis products in the Purex Process have been studied. Hydrolytic conditions may be encountered in the process which would lead to formation of dibutyl phosphoric acid, causing significant losses of tetravalent plutonium in stripping. This situation may be easily alleviated by reducing and stripping the plutonium in the trivalent state."

Technical report presenting a consideration of the characteristics of fused salt-ThF4 solutions suitable for use in homogeneous reactors. Presented in tandem with a brief survey of the literature pertaining to such solutions and a summary of the experimental work accomplished. [From Abstract]