Report documenting baseline data for the use in developing a comprehensive strategy for the reduction of energy use in transportation.

Annual report for the Oak Ridge National Laboratory Health Physics Division including sections on medical physics and internal dosimetry; chemical physics and spectroscopy; biological and radiation physics; assessment technology; emergency technology; analytic dosimetry and education group; theses, papers, publications, and lectures; and miscellaneous staff activities.

Report documenting the ongoing research and development of the Oak Ridge National Laboratory's Chemical Technology Division.

From summary: "Report documenting research and developments made by the Health Physics Division of the Oak Ridge National Laboratory."

Report discussing "[a]n ecological theory of adaptation at the community level of organization" focused around an estuary and its resident life forms.

Report containing ongoing research and development of the Solid State Division of the Oak Ridge National Laboratory.

Report issued by the Oak Ridge National Laboratory discussing thermodynamic calculations of nuclear fuels. As stated in the introduction, "the equations developed in this report could be used to calculate the capacity of chlorine for transporting plutonium tetrachloride" (p. 2). This report includes tables, and illustrations.

Report containing the description and design of U₃O₈-Aluminum Dispersion Fuel Elements for Core I of the Puerto Rico Research Reactor. Topics include the requirements of core materials, materials specifications, manufacturing procedures, and shipping preparation.

This technical report describes development work done on method of particle separation by the Biology Division of the Oak Ridge National Laboratory and the Oak Ridge Gaseous Diffusion Plant during the period January 1 to June 30, 1963, under the Joint National Institute for Health-Atomic Energy Commission Zonal Centrifuge Development Program. The central effort has been to develop zonal centrifuge systems for the separation of cells and sub-cellular particles, including viruses, and bio-colloids, including proteins and nucleic acids.

Report documenting research and developments made by the Health Physics Division of the Oak Ridge National Laboratory.

Review of methods by which the radial deposition mechanism was determined in experiments with simulated waste solutions are briefly reviewed.

Economic and hazards calculation of pot calcination of Purex and Thorex wastes.

A program has been coded for the ORACLE which will solve, using Monte Carlo technique, the transport problem for monodirectional, monoenergetic gamma radiation incident at an angle Θ, upon an infinite laminated slab of finite thickness. Each of the laminations (or regions) is itself an infinite, homogeneous slab of finite thickness. The code is designed to give estimates of energy deposition, energy flux, tissue dose rate, reflected and transmitted energy current, and the angular and energy distribution of the reflected and transmitted energy current. All the answers except for energy deposition and reflected and transmitted energy current are optional.

A helium coolant side-stream purification system consisting of parallel sections for radioactive and non-radioactive de-contamination was designed for the proposed Pebble Bed Reactor Experiment. Primary equipment components are two gas coolers, gas heater, charcoal delay trap, CuO oxidizer, Molecular Sieve adsorber, and full flow filter. The charcoal delay trap is sized to provide a hold-up of 30 minutes for Kr isotopes, 6hr hold-up for Xe isotopes, and 99.9% retention of iodine isotopes resulting in "de-contamination factors" varying from l for Kr85 to 556 for I131. Non-radioactive de-contamination will result in a steady state concentration of CO2 in the coolant of 20.8ppm or less.

A literature study has been made of rates for the reaction of oxygen with high-purity artificial graphite. Values from a number of sources have been expressed on a common basis which provides approximate correction for the retarding effects of oxygen diffusion in the graphite pores. The corrected rates can be correlated by the equation k = 7.24 x 10^9 exp (-22 100/T), where k has units of weight fraction oxidized per hour and T as in °K. Effects of oxygen concentration, solid and gas-phase contaminants, and radiation on the observed rates are discussed. Methods for estimating rates and spatial distribution of heat release during graphite oxidation are presented. These should be of value in analyzing the hazard of a graphite fire following a coolant system rupture in a gas-cooled, graphite-moderated reactor.

A development program is being carried out in the pilot plant to improve the equipment involved in monitoring, metering and pumping process streams. The equipment under development includes an alpha monitor, a gamma monitor, a waste water monitor, a liquid flow rate meter, a canned rotor pump, a diaphragm pump, air lifts and a pressure tank pump. This report presents the present status of the testing program.

Methods for the noncorrosive removal of volatile fission products and UO2 dust from carbon steel and stainless steel have been developed. Procedures for applying these methods to the decontamination of the EGCR charge and service machines are described.

A conductometric titration method described by Goldstein was adapted for use in a remote analytical facility. The results obtained by mean of experiments made prior to this adaptation indicated that methanol is the most satisfactory medium in which to determine excess sulfuric acid in uranyl sulfate solutions that stimulate Homogeneous Reactor type fuel. When methanol is used, the complexation of hydrolyzable ions with sodium fluoride, as described by Pepkowitz, Sabol, and Dustin, is not required.

EXPIRE is a calculation which predicts the reactivity-lifetime, instantaneous and integrated effective multiplication constants and instantaneous and integrated effective multiplication constants and instantaneous conversion ratio for heterogeneous reactors. The concentration of all the isotopes of interest from Th232 to Am243 are calculated as a function of time using the average reactor power density and a uniform flux distribution. The equations have been programmed for the IBM-704 computer and the average running time is approximately two minutes per reactor lifetime.

A portable shield has been designed, developed, fabricated and shop tested to provide the HRT with a facility for direct dry maintenance operations. It provides temporary replacement for any one of the lower roof plugs and should permit many operations to be performed without flooding the reactor cell with water.

The effect of adding small quantities of fuel or poison to the HRT has been estimated using perturbation theory. The results have been reduced to a single relation and a set of graphs which make the estimation of added reactivity relatively simple. The perturbation theory results are compared with multigroup results and reasonable agreement is demonstrated; however, there is some question concerning the prompt neutron lifetime.

The theory of mass transfer into a flowing fluid is utilizes to estimate the effect of gas film resistance on overall rates of transfer through a porous septum. The expressions developed for the mass transfer ratio...

The preparation of essentially pure dimethyl selenide for the Isotype Separations Group, Chemistry Division, is described. The compound was prepared by warming a mixture of selenium, sodium hydroxide, sodium formaldehyde sulfoxylate in aqueous solution for several hours at 50°C and then adding methyl iodide. Dimethyl selenide was removed by distillation.

The calculation of concentration transients caused by mixing in the interconnected three-body system of the fuel dump tanks, core and blanket has been coded for the IBM-704. The system of equations includes material balances, the dependence of critical temperature on core and blanket concentrations, and the effect of temperature (density) changes on flow rates. The controllable flow rates, the fuel dump tank weight and the initial conditions are input variables. Outputs include core and blanket concentrations, critical temperature, concentration ratio and power ratio. The code has been used to compute transients during a number of operating situations.