From introduction: A new method for determining the radiation characteristics of leakage from electronic equipment for interference studies is described in this report. Basically, an unintentional leakage source is considered to be electrically small, and may be characterized by three equivalent orthogonal electric dipole moments and three equivalent orthogonal magnetic dipole moments. When an unknown source object is placed at the center of a transverse electromagnetic (TEM) cell, its radiated energy couples into the fundamental transmission mode and propagates toward the two output ports of the TEM cell. With a hybrid junction inserted into a loop connecting the cell output ports, one is able to measure the sum and difference powers and the relative phase between the sum and difference outputs. Systematic measurements of these powers and phases at six different source object positions, based on a well-developed theory, are sufficient to determine the amplitudes and phases of the unknown component dipole moments, from which the detailed free-space radiation pattern of the unknown source and the total radiated power can be determined. Results of simulated theoretical examples and an experiment using a spherical dipole radiator are given to illustrate the theory and measurement procedure.

From abstract: This paper describes a Bessel null technique to measure the frequency response of a frequency-modulated rf carrier and a program to automate frequency response measurements of signal generators with output frequencies from 0.450 to 2000 MHz. The measurements obtained using this technique are more precise than those obtained by a highly trained technician using a manual system.

Description of a computer program for searching chemical information on magnetic tape.

From abstract: The thermophysical and transport properties of selected fluids have been programmed in FORTRAN 77 which is available for micro computers. The input variables are any two of P, p, T (pressure, density, and temperature) in the single phase regions, and either P or T for the saturated liquid or vapor states. The output is pressure, density, temperature, internal energy, enthalpy, entropy, specific heat capacities (Cp and Cv), speed of sound and, in most cases, viscosity, thermal conductivity and dielectric constant.

Abstract: A thermodynamic property formulation for ethylene, developed as a part of a joint industry-government project, is presented. The formulation includes an equation of state, vapor pressure equation, and equation for the ideal gas heat capacity. The coefficients were determined by a least squares fit of selected experimental data. Comparisons of property values calculated using the equation of state with measured values are given. The equation of state is not valid in the critical region (pc + 0.3 pc for temperatures of Tc + 0.05 Tc). Errors on the order of 20 percent for derived properties and 10 percent for density may be encountered near the critical point. Tables of the thermodynamic properties of ethylene for the liquid and vapor phases for temperatures from the freezing line to 450 K with pressures to 40 MPa are presented. The equation of state and its derivative and integral functions for calculating thermodynamic properties are included. Estimates of the accuracy of calculated properties are given. A guide for use of computer programs for the calculation of thermodynamic properties of ethylene with listings of subprograms and a sample program to illustrate the use and results of the program are included.

Report issued by the U.S. National Bureau of Standards discussing the use of metric units of measurement during construction. As stated in the scope, "this document outlines a selection of SI units, with multiples and sub-multiples, for general use in building design and construction" (p. 1). This report includes tables, and illustrations.

Abstract: A general theoretical approach is formulated to describe the complex electromagnetic environment of an N-element array. The theory reveals the element-to-element interactions and multiple reflections within the array. From the formulation, it is found that the interaction between an excited element and an open-circuited element can be viewed as the sum of terms describing all possible signal paths within the array environment which start from the radiating element and terminate on the element under observation. Within all paths except the most direct one, multiple reflections between subgroups of elements take place. The resulting solution is highly structured and recursive and is discussed in detail in the text. Illustrative examples are provided to facilitate understanding of these ideas.

The survey covers PVT, thermodynamic, thermal, transport, electrical radiative and mechanical properties.

Integrated tables of pressure, volume, and temperature for the saturated liquid, from the triple point to the critical point, for oxygen, nitrogen, argon, and parahydrogen.

The need for thermodynamic functions of para hydrogen, especially in compressed liquid and dense fluid states, prompts the tabulation of these provisional properties, computed by approximate methods utilizing the new PVT data of these reports. Computation and preparation of the tables is discussed under the following: Approximate Computational Methods; Correlation Methods; Discussion of Errors; and Tables of Functions.

From introduction: For the first time, transfer standards have been developed for measuring 1.064 Pm laser pulses of duration about 10-100 ns, peak irradiance of about 10-8-10-4 W/cm2, and fluences of about 10-16-10-11 J/cm2 . These energy and power measurement devices use PIN and APD silicon detectors, respectively, and can be used as stable transfer standards with total uncertainties (random errors computed at the 95 percent confidence level) of 10 to 15 percent. The system for calibrating these transfer standards is also described and consists of a cw Nd:YAG laser beam acousto-optically modulated to provide low-level laser pulses of known peak power and energy. A detailed evaluation of systematic and random errors is also shown.

Abstract: The improved Density Reference System, the reference densimeter, and the method of determining sample density are described. The uncertainty of the density reference system is + 0.055%. The contribution from the estimated systema -ic error in density was + 0.022%. The estimated uncertainty caused by random error is three times the standard deviation of 0.011% and is based on sixty-three measurements of the densities of saturated liquid methane. The total density uncertainty is taken to be the sum of the systematic and random errors. This applies to the density range of 400 to 480 kg/m at pressures from 0.8 to 4 bar absolute and temperatures between 109 and 128 K. This accuracy statement is expected to apply over ranges of at least 400 to 1000 kg/m3 in density, 77 to 300 K in temperature, and 0.8 to 7 bar in pressure though the accuracy over these ranges has not been verified.

Abstract: Densimeters for liquefied natural gas (LNG) from four manufacturers were tested in liquid methane and an LNG-like mixture of methane, propane, and nitrogen in the density reference system (DRS). The calibration and performance of one type tested for the first time are reported. The stability of the calibrations and performances of three densimeters of a type previously tested have been examined and are also reported here.

Graphical presentation of he three-phase region at and near the triple point of parahydrogen.

Abstract: The preliminary design and testing of a planar circuit six-port with diode detectors is described. The planar circuit medium was chosen to be finline, and all preliminary work was done in WR-42 waveguide (18-26.5 GHz). The finline substrate was alumina, and initially commercial beam-lead diodes were bonded to the finline metalization. The goal is to design an integrated circuit which could be fabricated on one chip (with diode detectors) and used as part of a six port network analyzer in the waveguide bands above 18 GHz. Initial designs proved to b unsatisfactory because of high losses and reflections. Most of the problems have b en solved, and a usable integrated finline circuit is a good possibility for a millimeter wave six-port.

Abstract: A microcalorimeter has been built in WR 10 waveguide, 75-110 GHz, to serve as a power standard at the National Bureau of Standards (NBS). Included here is an evaluation of the errors in using the microcalorimeter for the measurement of effective efficiency of bolometer mounts. The error analysis shows a systematic uncertainty of +/- .83 percent and a random uncertainty of .37 percent.

Technique for varying the coupling of power from far-infrared gas lasers and the design and construction of these lasers.

Introduction: Small aperture theory is used to investigate the dual TEM cell. Analyzing coupling through an empty versus a loaded aperture leads to a model of dual TEM cell shielding effectiveness measurements. Small obstacle scattering yields results for both the field perturbation and the change in a cell's transmission line characteristics due to the presence of a test object in a TEM cell. In each case, theoretical values are compared to experimental data.

Abstract: Shielding effectiveness relates to a material's ability to reduce the transmission of propagating fields in order to electromagnetically isolate one region from another. Because a complex material's shielding capability is difficult to predict, it often must be measured. A number of measurement approaches are studied including the use of a shielded room, coaxial transmission line holders, time domain signals, the dual TEM cell, and an apertured TEM cell in a reverberation chamber. In each case, we consider the system's frequency range, test sample requirements, test field type, dynamic range, time required, analytical background, and present data taken on a common set of materials.

From abstract: The excitation of a transverse electromagnetic (TEM) cell by a vertical electric Hertzian dipole is analyzed where the gap between the septum and side wall is assumed to be small. Approximate expressions for the field distribution and characteristic impedance are derived. These expressions are numerically evaluated for some typical geometries, and good agreement with previously published results is shown. The formation also allows a vertical offset for the septum position, thus offering more flexibility of increasing the size of the test area to accommodate larger pieces of test equipment.

Abstract: The input impedance of a probe antenna exciting a transverse electromagnetic (TEM) transmission line cell is formulated by a variational approach. The formulation also utilizes the results from a previous work on the field distribution inside a TEM cell excited by a vertical electrical Hertzian dipole. The final result of imoedance is shown to consist of two distinct terms, which are respectively contributed by the ordinary rectangular waveguide and the gap perturbation. Numerical results for both the real and imaginary parts of the impedance are given. The resistive part is found to be proportional to the square of the probe length, and the reactive part largely capacitive.

Abstract: Selected publications of the Ion Storage Group of the Time and Frequency Division, NBS, Boulder, Colorado.

This paper presents the details to implement a WR15 attentuation and reflection coefficient magnitude measurement system.

From introduction: The purpose of this Technical Note is to describe refracted-ray scanning in detail, to analyze it as a measurement system, to document a particular system for implementing it, and to show some exemplary results.