Paper presenting three ideas regarding potential simplifications of missile-control systems in order to make them more reliable without sacrificing system performance. The three methods presented include an autorotating-vane spoiler, a bellows flap, and free controls. All are based on modified airplane control systems.

Report presenting the results of an investigation to determine the effects of a small jet of air exhausting from the nose of an elliptical body of revolution upon boundary-layer transition and the viscous, pressure, and total drag of the forebody at three body stations at Mach number 1.62. The jet effects on body pressure, pressure variations, boundary-layer transition, and total drag are provided.

Report presenting an investigation of the lateral stability and control effectiveness of a model of a fighter-type airplane model with a low-aspect-ratio and 3.4-percent-thick wing with negative dihedral at a range of Mach numbers, sideslip angles, and angles of attack. Results regarding the lateral characteristics at zero angle of attack, lifting conditions, and lateral and directional controls are provided.

Memorandum presenting an experimental investigation of the cooling characteristics of a small air-cooled turbine blade for use in a turboprop engine in a static cascade facility. Three test blades were studiued at three combustion-gas temperatures. Results regarding gas-flow conditions in cascade test section, correlation of temperature data, and application of correlated data to the typical engine are provided.

Memorandum presenting a review of the subsonic-diffuser data available in the literature, which is then reduced to certain appropriate performance coefficients and presented as functions of the significant geometric and flow variables. Results regarding total-pressure-loss factor, diffuser effectiveness, recovery of diffuser effectiveness in the tailpipe, inlet speed effects, exit flow distributions, boundary-layer control, and effects of distorted inlet velocity distribution are provided.

Memorandum presenting the results of a wind-tunnel investigation of the static stability and control characteristics of a model of a fighter airplane employing a low-aspect-ratio swept-back wing with trailing-edge elevons, a swept-back vertical tail, but no horizontal tail. The results indicated that, for the test conditions at which the investigation was conducted, the model, with elevons undeflected, was longitudinally and directionally stable.

Free flight tests of 45-deg swept wings of 3.15 aspect ratio and 0.54 taper ratio to measure wing damping and possible transonic flutter.

Report presenting an investigation at two Mach numbers to examine the flow, force, and moment characteristics associated with spoilers mounted on a flat plate at a range of sweep angles. Pressure measurements were obtained over the plate and spoiler faces. The pressures were integrated to determine the spoiler lift, pitching-moment, drag, and hinge-moment characteristics.

Memorandum presenting an investigation in natural icing conditions to determine the effect of ice formations on the performance of an axial-flow turbojet engine. A description of the change over time in tail-pipe temperature, engine jet thrust, fuel flow, ice collection, and acceleration qualities are provided.

"An experimental investigation was conducted to determine the cooling effectiveness of a wide variety of air-cooled turbine-blade configurations. The blades, which were tested in the turbine of a - commercial turbojet engine that was modified for this investigation by replacing two of the original blades with air-cooled blades located diametrically opposite each other, are untwisted, have no aerodynamic taper, and have essentially the same external profile. The cooling-passage configuration is different for each blade, however" (p. 1).

Report presenting a method for calculating the lift and pitching-moment characteristics of circular cylindrical bodies in combination with triangular, rectangular, or trapezoidal wings or tails through the subsonic, transonic, and supersonic speed ranges. A computing table and set of design charts are presented to reduce the calculations to routine operations. Information about lift, center of pressure, effects of wing incidence, and limitations and extensions of the method is provided.

Report discussing an investigation to determine the effects of aeroelasticity on the rolling effectiveness of a model of a McDonnell F3H-1 airplane wing. The plane was found to be subject to aeroelastic losses that varied with Mach number and altitude.

Report discussing a project to determine a high-energy fuel suitable for turbojet-powered aircraft. Components of the project include thermal and combustion properties, experiments with combustors using boron compounds, evaluation of boron fuels in full-scale turbojets with and without afterburners, and boron fuel use in ramjet flights. The most promising fuel found in the report is pentaborane.

Memorandum presenting a brief summary of the recent theoretical and experimental work on local heat-transfer rates on blunt-nose bodies. Results regarding the calculation of local flow conditions, prediction of stagnation-point heating rates, and calculation of heating rates over entire nose are provided.

Memorandum presenting an investigation in the 7- by 10-foot tunnel to determine the effect of wing-root leading-edge and scoop-type jet-engine air-inlet configurations on the static longitudinal stability characteristics and the duct-flow characteristics of a scale model of the MX-1764 airplane. The addition of the inlet configurations to the model generally resulted in slight reductions in longitudinal stability and increases of maximum lift coefficient.

Low cowl drag, external compression inlet with subsonic dump diffuser for high Mach number application.

Memorandum presenting a study of an acceleration-limiting control on a turbojet engine in order to determine its feasibility as an acceleration control. A proportional-plus-integral type of controller was used in the investigation. Results regarding the one-loop control and two-loop control are provided.

Memorandum presenting a survey of the problems introduced by the increased longitudinal stability and reduced directional stability of aircraft operating in the low supersonic speed range. Information regarding longitudinal stability and directional stability are provided.

Memorandum presenting an investigation of the effects of modifying a twin side-inlet duct system on an interceptor airplane as recorded and analyzed over an altitude range from about 25,000 to 51,000 feet throughout the transonic speed range to a Mach number of about 1.2. The modifications consisted primarily of redesigning the inlet lip, increasing the cross-sectional area of the inlet and diffuser, and adding a region of duct contraction ahead of the engine.

Report presenting free jet tests of a model of the inlets and forebody of the McDonnell XF3H-1 airplane with the original and two alternate nose shapes. Results regarding the total-pressure recovery after diffusion, maximum mass-flow ratio, inlet total-pressure profile, shadowgraphs, flow variation, and pressure oscillations are provided.

Report presenting an experimental investigation in a simulated afterburner test rig to determine the effects of some configuration variations on afterburner combustion performance. Results regarding the reduced-diameter flameholder, inclined radial-gutter flameholder, tapered-shell afterburner, and turbulence generators are provided.

Combustion chamber liners for gas turbines and experimental set-ups were tested for failure. A ceramic-lined test chamber was operated at fuel/air ratios up to 0.050. Thermal-shock evaluation indicated that a ceramic lining, which expands after firing, would crack but would not fall apart during operation. Refractoriness of the lining and the resistance to mechanical shock were adequate. In general, shell temperature reductions of approximately 400 deg F were effected by the use of this lining at fuel/air ratios of 0.016 and 0.050. The mechanism of failure of the ceramic lining was induced by sudden heating and cooling during operation.

Investigation at transonic speeds in the high-speed 7- by 10-foot tunnel to determine the rolling-effectiveness characteristics of a spoiler on a double-wedge-type semispan wing with a sweepback angle of 42 degrees. Results regarding the variation of rolling-moment coefficient, spoiler effectiveness, and rolling effectiveness are provided.

Report discussing an investigation of the DM-1 glider, which has an approximately triangular plan form, with auxiliary studies of a model of triangular wings. The pitching-moment coefficient, drag coefficient, and angle of attack with the lift coefficient are provided. Results indicated that the angles of descent without power are likely to be prohibitive and airplanes with the tested type of wings will not be able to land safely without power.