The calculation of shielding the thickness for plutonium is complicated by the many different energies represented in the gamma radiation emitted during decay of the plutonium isotopes. Dose rate predictions are also frequently confused by gamma from varying content of fission product impurities in the plutonium, as well as other gamma radiation induced through alpha and neutron particle absorption within the source material or its environment. After assumptions are made for these many factors the radiation data for shielding determination is still frequently inadequate because of wide variations in dose rates resulting from self-absorption. The degree if self-shielding is in turn dependent on nature of the plutonium compound, degree of compactness, weight, and over-all geometrical distribution of the source material. By preparing a variety of plutonium samples representing combinations of these varying factors, actual dose rates and gamma spectra, as obtained from them, can then be extrapolated for application to specific situations.

Summary: "Criticality was considered impossible in any contingency encountered in practice under either of the following conditions which include no safety factor: (a) In any isolated cylinder not more than 5 in. in disruptor, if the total amount of U235 present does not exceed 7.5 Eg. (b) In an isolated vessel of any shape and size, if the total amount of U235 present does not exceed 880 g. An "isolated" vessel is one which does not "see" more than 0.1 [...] other vessels containing fissionable material."

Space has been reserved near the southeast corner of the 100-N Area for the 122-N Decontamination Facility. Previous correspondence between Burns and Roe, Inc and General Electric bae discussed various facilities which might be needed in the building. The concepts of the decontamination processes are under active development by research groups at Hanford. At present, there are several workable processes known; each one has one or more fairly serious drawbacks.

An investigation of corrosion in the 327 Building's water storage basin was made to determine whether the static storage of aluminum jacketed fuel elements could cause corrosion effects that would interfere with studies of in-pile corrosion.

A multi-purpose program for processing exponential data has been prepared for the 709 computer. The main purposes of the program is to compute the material buckling from raw data (given counts, time, and counter information) or from previously calculated Athermal's. It is also possible to compute only CeCh (end and harmonic corrections) for a given B11 or series if B11's no counting data being entered. In every case, pile measurements must be submitted as input for corrections.

Water treatment systems for preparing and maintaining high purity water in out-of-reactor or in-reactor test oops are becoming increasingly important. In out0of-reactor experiments the presence of ionic impurities in the water has a marked influence on film formation and corrosion rates. It is therefore , imperative that these impurities be maintained at the lower practical concentration.

This procedure is intended to be used as: 1. An instruction and guide for operation of the KER loops. 2. To aid in familiarization and understanding of the general operation of the loops. 3. To prevent lost time due to errors in loop operation. The procedure is not meant to be completely comprehensive in all details of loop operation.

An abrasive cutoff machine design, based upon a previous model, (1) was undertaken to provide for the sampling of radioactive material. the design objective was; first, to provide samples for metallographic examination, second, to provide samples for physical and mechanical property testing, and, third, to meet the following design requirements: 1. Remote operation. 2. Airborne contamination control. 3. Radioactive waste collection. 4. Remote maintenance.

The preparation of radioactive metallurgical specimens for microscopic examination is one of the responsibilities of the Radiometallurgy Sub-Unit. An abrasive cut-off machine development program, based upon a previous experimental model, was undertaken to provide a method for sectioning of irradiated materials without undue personnel exposure or spread of contamination and finally to provide data for the design of an abrasive cutting unit for use in the work cells in the Radiometallurgy Building. A horizontal-feed type set-off machine, powered by a 7 1/2 hp motor with V-belt drive, has been developed for the submerged sectioning of irradiated uranium and is currently being used successfully to obtain samples for metallurgical, chemical and physical investigations without excessive personnel exposure or spread of radioactive contaminates.

Abstract: An investigation was conducted to determine the absorption and translocation of fission products by Russian thistle from a localized spot of contaminated soil. The amount and identity of the radioactive elements absorbed and translocated by the Russian thistle is given along with the location of these elements in the plants. Beta radioactivity to the amounts of 10 microcuries per gram caused no visible effects on the growth habits of sectioned material are included.

A preliminary soil column experiment with a waste sample from the 207-S-11 well, which monitors the 216-S cribs, indicated that cesium was absorbed almost completely by the soil but that strontium breakthrough to ground water in the near future seemed likely. Accordingly, it was suggested that the 216-S wastes be discharged to a new disposal site, and that samples of the wastes which are currently being discharged to the 216-S cribs be obtained for soil absorption tests. The primary purpose of these tests was to obtain data which could be used to suggest ways and means of improving the absorption of strontium by soil from the process condensate stream (D-2_ and the cell drainage stream (D-1), both of which have been discharged to the 216-S cribs for the past several months.

The purpose of this report is to present the information obtained relative to the characteristic adsorption of radioisotopes in a long (forty feet) laboratory soil column treated with a high salt, process waste of high activity density. The movement of adsorbed cations in a soil column subjected to prolonged leeching by water also was determined.

The following document describes data collected from a 14-month period of analyzing crustaceans containing radioactivity. Provided is information based on the change of radioactivity through seasonal changes.

The following report provides data collected during an investigation in the Columbia River. The purpose of this investigation was to research the radioactivity present in the bottom-living organisms of the river.

Abstract: The data obtained from the radioassay of fish collected in vicinity of the Hanford Works between April, 1948 and June, 1950 are presented. Most of the radioactivity in the fish resulted from the concentration of p32 in the scales, bone, and certain visceral organs. The level of activity density in the fish was influenced by size, feeding habits and metabolic rate in addition to the activity density of the water. Changes in operation of nuclear reactors have resulted in progressive increases in activity densities of fish from one year to the next. The levels of radioactivity are not sufficiently high to be hazardous to either the fish or persons eating them.

The Non-Production Fuel Reprocessing Program involves the chemical processing of valuable reactor fuels received from privately owned power reactors. It is necessary therefore, to accurately measure the fuel material received in order to insure proper payment to reactor operator and to provide the Atomic Energy Commission with appropriate accountability data. The volume measurement study described herein was conducted in order to determine the limits of accuracy that could be obtained in measuring relatively large volumes of solution under plant processing conditions.

The following document analyzes radioactive spot contamination in and around the T and B Plant Areas.

From introduction: "This report provides background information regarding the study results presented in the first volume of this report and provides information resulting from the studies made on the gas cooled reactor concept."

An addendum to report HW-30390 a additional power generation calculation for P, the rate of energy release, in kilowatts, was derived.

Handwritten report. This theoretical introduction to the anisotropic elastic properties of the orthorombic [sic] uranium crystal presents certain basic ideas which are useful in the study of experimental methods for determining preferred orientations in polycrystalline bodies. The method of analysis used to determine the elastic constants suggests explanations and correlations for the observations of sonic wave experiments on bars having preferred orientations and also serves as an introduction into the type of mathematical relations used in the study of anisotropic crystals.

This report contains the results of tests which demonstrated the feasibility of using graphite labyrinth type seals, i.e., a bushing machined with alternate grooves and lands on the inside diameter to create a sufficient pressure drop to provide a satisfactory seal.

A bibliography on the subject of air sample activity vs flow rate has been prepared. The findings in two documents reviewed have been applied directly to this problem. It is concluded that air sample activity is not dependent on flow rate when sampling particles whose average diameter in 0.06 micron or greater.

Disposal of liquid radioactive wastes to ground requires knowledge of the area ground-water hydrology. Information is desired on direction and velocity of ground-water flow. Direction of flow can be determined from maps showing contours on the water table surface, such contours being derived from well water elevations. Ground-water velocity is more difficult to ascertain.

Experimental combination hand and shoe counter redesign as a compact, simplified, register readout instrument no larger than the present Five-Fold called Model 2.