Summary: "Criticality was considered impossible in any contingency encountered in practice under either of the following conditions which include no safety factor: (a) In any isolated cylinder not more than 5 in. in disruptor, if the total amount of U235 present does not exceed 7.5 Eg. (b) In an isolated vessel of any shape and size, if the total amount of U235 present does not exceed 880 g. An "isolated" vessel is one which does not "see" more than 0.1 [...] other vessels containing fissionable material."

Abstract: An investigation was conducted to determine the absorption and translocation of fission products by Russian thistle from a localized spot of contaminated soil. The amount and identity of the radioactive elements absorbed and translocated by the Russian thistle is given along with the location of these elements in the plants. Beta radioactivity to the amounts of 10 microcuries per gram caused no visible effects on the growth habits of sectioned material are included.

Report detailing an analysis of the deposition of I-131 on vegetation. Analysis was necessary to determine the potential hazards of the gases from the dissolution of the metal on vegetation.

Report describing how the neutralized aqueous waste from the TBP Metal Recovery Process will be concentrated by evaporation to minimize the requirements for underground storage tank capacity.

From introduction: "This report presents the apparent viscosities of supernate-sludge slurries prepared synthetically to simulate the conditions known to exist in the waste storage tanks, but with fission products and plutonium absent."

The following documents are progress reports that follow chemical research studies in subjects such as ruthenium tetroxile distillations, extraction-scrub studies of zirconium and niobium, and oxidation of plutonium and stabilization of plutonium(VI) during extraction of IAF solutions.

Objective: The objective of this study is to develop a simple method of either removing the C1- ion from the RAW or converting the ion into a less corrosive valence state.

From statement of objectives: The purposes of the work described in this report are to provide data useful for designing and operating the dissolver solution clarification equipment to be installed in the Redox production plant.

Abstract: This report gives the results of a radiochemical analysis of particles collected by electrostatic precipitation from ventilation air of the "B" plant at Hanford Works.

From introduction: This report summarizes a study of the composution and physical properties of a number of hydrocarbon diluents together with some generalizations regarding relations between [vapor pressure, density and viscosity] properties.

Report describing the methods, discrepancies, accuracy of methods, and conclusions of two different analytical methods of spectrochemical analysis of plutionium.

From introduction: "The test was performed to gain knowledge which would be useful for evaluating and improving currently planned methods for the design and construction of high density concrete shielding."

Introduction:"A corrosion test program in support of the Redox Project was carried out during the second quarter of 1950 to determine the corrosion rates of several austenitic stainless steels in simulated 202-B Waste Storage solution containing HF, HN03, and H2SO4 acids. The results of this program are contained herein and all original data are recorded in laboratory notebook HW-3282-T."

The following report provides the results of laboratory corrosion tests held to investigate the behavior of austenitic stainless steel, Type 347, in selected O.R.N.L. #1 Redox streams.

Introduction: "A laboratory investigation of the relative corrosion resistance of several austenitic stainless steels to the RAW stream of the Tributyl Phosphate Waste Metal Recovery Process was made during the first quarter of 1950. The results of this investigation are reported herein; all original data are recorded in laboratory notebook HW-3282-T."

The following report covers the construction materials selected for laboratory corrosion studies and the determination of their corrosion rates in process solutions.

Introduction:"A corrosion test program to determine the effect TBP process streams, which contain chlorides, have upon the corrosion resistance of several construction materials, was completed. Data are presented on the performance of Carpenter 20, T-309SCb, T-347. T-316 and tantalum in the RAF and RAW process streams and on the performance of titanium and zirconium in the RAW stream."

From introduction:"It was the aim of this investigation to determine the resistance of several materials of construction to current and anticipated and anticipated Hanford separation process waste streams under specific conditions. The corrosion rates of mild steel and austenitic stainless steel and the resistance of several commercial protective coatings were established."

The following report provides data from completed tests for corrosion testing of stellite-T347 stainless steel test cylinders.

The following report provides results from laboratory tests on the corrosion resistance of various types of stellite facings on astenitic stainless steel T-347 to Redox streams.

Introduction: "The need for a method of acid determination which could be used for small samples and easily adapted to remote control led to the investigation of the use of electrolytically generated base for the titration of acid in certain solutions. The use of electrolytically generated base for the titration of acetic acid in the presence of nitric acid has been reported (1)."

The following report describes the process of the determination of nitrous oxide with the infrared spectrometer.

The following report examines a rapid method used to eliminate the possibility of explosive perchlorate-organic mixtures in a control laboratory in order to determine radiocesium. These methods include the usage of chloroplatinic acid as a precipitate of radocesium.

Introduction: "The adoption of aluminum nitrate as salting agent in the Redox process made it imperative that a method be available for determining plutonium in the presence of aluminum. However, large amounts of aluminum have been found to interfere with the determination of plutonium by the lanthanum fluoride procedure. Previous attempts to increase the accuracy of the lanthanum fluoride method, by precipitating LaF3 from 4 M HF (rather than 2 M), have been successful only when the initial plutonium level was high."