Two xenon extraction runs were made this month. It appears that a small design change in Trap #2 will be necessary so that a dry ice-trichloroethylene slurry can be used for coolant rather than liquid freon. For each of the runs this month the enriched generator was exposed for four hours in the est pile operating at 100 watts. A period of eight hours for cooling and xenon builidup was allowed before the collection and separation runs were started.

Hanford uranium contains minute angular inclusions which affect the microstructure, reactivity, and other important factors controlling the serviceability of the metal. Small quantities of the inclusions have been isolated by chemical means, and the x-ray diffraction patterns and chemical analyses of the isolated materials have been determined. As a first step in the identification of the inclusions present in rolled uranium, a search was made for a chemical method of separating the inclusions from the matrix metal.

This report describes the work carried out in 321 Building semiworks equipment, to define the factors contributing to high corrosion-product contamination and presents recommendations for reducing the impurity level to meet current specifications (maximum of 200 parts total metals per million parts U).

The first of two general methods are discussed based on the removal of the thin layer of aluminum to which graphite adheres. Two electro-polishing techniques, an electrolytic etch, an anodization-deanodication cycle and two chemical etches are described.

An improved method for the determination of boron in plutonium is reported. Precipitation of plutonium (III) acid oxalate prior to color development with curcumin results in increased precision, greater speed, and lower costs. Results are presented of a statistical study involving all variables.

Impurities are separated from plutonium solutions by means of TTA (thenoyltrifluoracetone) extractions. Plutonium in hydrochloric acid solution is reduced to the trivalent state with hydroxylamine, and some impurities are extracted into hezone or a solution of TTA in hezone. The organic phase is removed, and the plutonium in the aqueous phase is oxidized to the tetravalent state with nitric acid. Investigations of several variables which affect the extraction are described..

The monitoring of thermal and resonance neutron flux in a thermal reactor having high flux over periods of time from 1 to 12 months using think Co foils is considered. Special attention is paid to the many correction factors to be applied to the activation data; neutron temperature, effective cadmium cutoff energy, burnout of Co59 and Co60, and decay of Co60. Results on a homogeneity test of 10 mil, 0.08% Co-A1 alloy foils is given.

This is the sixteenth quarterly report of the research and development activities of the Radiological Sciences Department, Hanford Atomic Products Operation, as before, includes some items charged to control but included for general interest. Such are identified as "not charged to research."

Laboratory studies have shown that the double salt, CaF2-PuF4, can be precipitated by rapid addition of hydro-fluoric acid to solutions containing 25 to 75 g Pu/1, caleium equimolar to plutonium, and 1 to 10 M HNO3. The precipitate, which is subsequently washed with water and dried to 300 degrees C in dehumidified, deoxygenated argon, can be reduced thermally by calcium to give high yields of plutonium metal.

Large savings in waste storage space may be realized by lowering the pH at which TBP waste is stored. Additional savings in neutralizing chemicals and operating time would also increase the monetary gain from such a process change. However, before such a change could be made, the corrosive effect of TBP waste at a lower pH on the mild steel waste storage tanks had to be determined.

The hydrogen contents of several types of fabricated uranium have been determined by a vacuum method and expressed in terms of ccH2/ccU. The data indicate that alpha-rolled metal contains about 0.25 ccH2(STP)/ccU whereas beta heat-treated uranium yielded values between 0.30 and 0.37 cc per cc. Restricted efforts were made to determine where in the heat treatment the 5 to 10 cc of hydrogen per slug were taken up. It appears that no one operation is wholly responsible for this additional gas, although reactions between beta heat treated surfaces containing microscopic defects, and nitric acid may possibly play a large role. In general it may be said that slug produced by powder metallurgical techniques contain less hydrogen than pieces produced by rolling and heat treatment.

Thirty gram patches of plutonium dioxide can be readily chlorinated by reaction with phosgene or carbon tetrachloride at temperatures of 350 and 450 C respectively. Plutonium trichloride prepared by either method can be reduced to the metal in a hermetically sealed bomb by reaction with calcium. On a twenty gram scale yields of approximately 97 per cent are obtained when a calcium-iodine booster is employed. It has been demonstrated that a method for reduction of plutonium trichloride to the metal without the use of a booster can be development.