Report of the Texas State Auditor's Office related to the financial statements of the Office of the Fire Fighters' Pension Commissioner (Commission). The report discusses the changes that the Commission has implemented to reduce investment operations risk, and the reportable conditions related to internal controls that, if not corrected, could adversely affect the Commission's ability record, process, summarize, and report its financial data accurately.

Report of the Texas State Auditor's Office related to the full-time classified state employee turnover rate for Fiscal Year 1997. This report provides classified employee turnover information that can be used to evaluate and address areas of concern related to turnover and potentially reduce turnover costs to the State.

A team of senior managers from across the US Nuclear Regulatory Commission (NRC), working with the Office of Information Resources Management (IRM), has completed an NRC Strategic Information Technology (IT) Plan. The Plan addresses three major areas: (1) IT Program Management, (2) IT Infrastructure, and (3) Information and Applications Management. Key recommendations call for accelerating the replacement of Agency workstations, implementing a new document management system, applying business process reengineering to selected Agency work processes, and establishing an Information Technology Council to advise the Director of IRM.

Financial statements from Texas Human Rights Foundation, Inc. documenting assets, expenditures, and other financial information for fiscal years 1997 and 1998.

This report is a research aid that lists the U.S. Department of Defense (DOD) authorization and appropriations bills for FY1961-FY2019 including: bill numbers, report numbers, dates reported and passed, recorded vote numbers and vote tallies, dates of passage of the conference reports with their numbers and votes, vetoes, substitutions, dates of final passage, and public law numbers. Significant definitions are also included.

Financial statements from Texas Human Rights Foundation, Inc. documenting assets, expenditures, and other financial information for fiscal years 1996 and 1997.

Financial statements from Texas Human Rights Foundation, Inc. documenting assets, expenditures, and other financial information for fiscal years 1998 and 1997.

The VA, HUD and Independent Agencies appropriations bill includes funding for the Department of Veterans Affairs (VA), Department of Housing and Urban Development (HUD), Environmental Protection Agency (EPA), National Aeronautics and Space Administration (NASA), and a number of independent agencies. This report describes some of the key issues affecting agency funding in FY1997.

The FY1997 agriculture appropriations act (P.L. 104-180) was signed into law on August 6, 1996. P.L. 104-180 provides $52.84 billion in FY1997 budget authority for the U.S. Department of Agriculture and related agencies, an amount which is $5.60 billion below the Administration's FY1997 request and $10.25 billion below the FY1996 enacted level. Much of the reduction in funding from FY1996 levels is attributable to an $8.9 billion reduction in the reimbursement for net realized losses of the Commodity Credit Corporation, which is the funding mechanism for USDA's commodity programs. The act also requires recipients of the new farm bill-authorized market transition payments to use eligible land for farm production, or place it in a conserving use.

Thermal sprayed ethylene methacrylic acid (EMAA) and ethylene tetrafluoroethylene (ETFE), spray-and-bake ETFE and polyvinylidene fluoride (PVDF) and brushable ceramic-epoxy coatings were evaluated for corrosion protection in a biochemical process to treat geothermal residues. Coupon, Atlas cell, peel strength, cathodic disbondment and abrasion tests were performed in aggressive environments including geothermal sludge, hypersaline brine and sulfur-oxidizing bacteria (Thiobacillus ferrooxidans) to determine suitability for protecting storage tanks and reaction vessels. It was found that all of the coatings were resistant to chemical attack and biodegradation at the test temperature of 55 C. The EMAA coatings protected 316L stainless steel from corrosion in coupon tests. However, corrosion of mild steel substrates thermal sprayed with EMAA and ETFE occurred in Atlas cell tests that simulated a lined reactor operating environment and this resulted in decreased adhesive strength. Peel tests to measure residual adhesion revealed that failure mode was dependent on exposure conditions. Abrasion tests showed that the ceramic-epoxy had good resistance to the abrasive effects of sludge. Thermal sprayed EMAA coatings also displayed abrasion resistance. Cathodic disbondment tests in brine at room temperature indicated that EMAA coatings are resistant to disbondment at applied potentials of {minus}780 to {minus}1,070 mV SCE for the test conditions …

The focus of this work is the production of 2-mm P{alpha}MS mandrels by microencapsulation for use as National Ignition Facility (NIF) laser targets. It is our findings thus far that the processing techniques used previously for the 0.5-mm and 1.0-mm targets are no longer useful for preparation of the larger targets for a few fundamental reasons. The driving force for sphericity (from the minimization of interracial energy) decreases as the radius of curvature increases. Simultaneously, the mechanical robustness /stability of the water-oil-water emulsion droplets decreases as the droplet size increases. The impact of these physical conditions and the possibilities of circumventing these limitations have been examined while attempting to meet the NIF shell power spectrum criteria. Identifying the key parameters in the transition (solidification) from a w-o-w droplet to a solid polymer shell has been understood implicitly to be the paramount goal. It is believed through the knowledge gained that it will be possible to minimize the deleterious forces and maximize shell sphericity. At this point it is believed that properties intrinsic to the polymer (i.e., P{alpha}MS) such as its solution behavior and evolution of film stresses control the overall shell sphericity.

Thermal sprayed ethylene methacrylic acid (EMAA) and ethylene tetrafluoroethylene (ETFE), spray-and-bake ETFE and polyvinylidene fluoride (PVDF) and brushable ceramic-epoxy coatings were evaluated for corrosion protection in a biochemical process to treat geothermal residues. The findings are also relevant to other moderate temperature brine environments where corrosion is a problem. Coupon, Atlas cell, peel strength, cathodic disbondment and abrasion tests were performed in aggressive environments including geothermal sludge, hypersaline brine and sulfur-oxidizing bacteria (Thiobadus ferrooxidans) to determine suitability for protecting storage tanks and reaction vessels. It was found that all of the coatings were resistant to chemical attack and biodegradation at the test temperature of 55 C. The EMAA coatings protected 316L stainless steel from corrosion in coupon tests. However, corrosion of mild steel substrates thermal sprayed with EMAA and ETFE occurred in Atlas cell tests that simulated a lined reactor operating environment and this resulted in decreased adhesive strength. Peel tests to measure residual adhesion revealed that failure mode was dependent on exposure conditions. Long-term tests on the durability of ceramic-epoxy coatings in brine and bacteria are ongoing. Initial indications are that this coating has suitable characteristics. Abrasion tests showed that the ceramic-epoxy had good resistance to the abrasive effects …

A 3.5 liter refractory-lined joule-heated glass melter was built to test the applicability of electric melting to vitrify simulated high activity waste (HAW). The HAW streams result from dissolution and separation of Idaho Chemical Processing Plant (ICPP) calcines and/or radioactive liquid waste. Pilot scale melter operations will establish selection criteria needed to evaluate the application of joule heating to immobilize ICPP high activity waste streams. The melter was fabricated with K-3 refractory walls and Inconel 690 electrodes. It is designed to be continuously operated at 1,150 C with a maximum glass output rate of 10 lbs/hr. The first set of tests were completed using surrogate HAW-sodium bearing waste (SBW). The melter operated for 57 hours and was shut down due to excessive melt temperatures resulting in low glass viscosity (< 30 Poise). Due to the high melt temperature and low viscosity the molten glass breached the melt chamber. The melter has been dismantled and examined to identify required process improvement areas and successes of the first melter run. The melter has been redesigned and is currently being fabricated for the second run, which is scheduled to begin in December 1997.

None