Abstract. Wigner effects on aluminum, beryllium, and tuballoy have been studied by the electrical resistance method. Samples were exposed during an interval which would have produced an increase of approximately 22% in resistance of AGOT-K graphite. The resistance of tuballoy increased approximately 1%. It is shown that the increase can be accounted for by the amount of fission product impurity formed during the exposure. Neither aluminum nor beryllium showed any change. In the case of Be, the Wigner effect may be obscured, to some extent, by the approximately .2 - .3 atom % of impurity present in the samples. Based on the increase occurring in ADOT-K graphite, a change of approximately .2 - .5 x10-6 ohm-om might be expected in the case of Be. The accuracy of the method was sufficiently great to detect a change of this magnitude. Other experiments with Be will be undertaken when purer samples are available. Meanwhile, some samples of the present type ae being subjected to further irradiation.

Abstract. A satisfactory method has been found for dissolving thorium metal and thorium oxide in heat-treated 25-12 stainless steel vessels without excessive corrosion of the vessels. The dissolution medium consists of strong HNO3 containing a small amount of fluoride or fluo-silicate. the fluoride required has no harmful effects on a subsequent solvent-extraction step for a separation of uranium isotopes from the dissolved thorium.

Abstract. The effect of various inhibitors on the production of CrIII in W waters containing chromatic has been studies at a variety of pH's in the CP-3 pile. The addition of 2 ppm NaClO3 appears to have little effect a a pH of 5.3, but 2 ppm NaClO3 cr 0.15 ppm of Cl2 (in the form of NaOCl) somewhat decreases the amount of chromatic reduced at a pH of 7.1. The inhibition is not great enough, however, to reduce the amount of CrIII formed to the maximum concentration permissible at W (0.02 ppm). The addition of 3 ppm (NH4)2S2O3 as an inhibiter will permit W water to be used a a Ph of 7.0, but not at a pH of 6.5 as far as chromate reduction is concerned. The concentration of CrIII would be 0.01 ppm and 0.05 ppm, respectively, after one passage through the pile. Previous conclusion as to the effects of temperature, pH, intensity and the addition of ammonium persulfate, which had been reached from experiments with simulation W water, have been checked by studies with solutions made from water chipped directly from Hanford. All of the effects noted were found to be similar to those already reported, …