The purpose of the test was to observe the extent and location of corrosion, crud deposits and defects in components of the primary fluid system and its auxiliaries. This observation will allow an estimate to be made of the future behavior of the affected parts. The test also provides for obtaining corrosion products and crud samples for analysis as necessary for planning remedial actions. This test was limited to the 1D Main Coolant Pump which failed November 3, 1958. The pump failed after 2234 hours of operation on "fast" speed and 887 hours at "slow" speed. An inspection for corrosion was not conducted but smear samples were taken and a radiochemical analysis made. This analysis showed the following isotopes were present in the smear sample: Co38, Co60, Fe59, Mn54, Hf191 and Zr95. The upper and lower radial pump bearings and journals were severely scored and galled while the thrust bearing and runner appear to be in good condition.

The purpose of the test was to obtain performance data for the main coolant pumps on fast and slow speed at various coolant temperatures. The 1A, 1B and 1C pump performances on both fast and slow speed were approximately as shown in the manufacture's predicted performance curve. The 1D pump performance was below the manufacturer's predicted flow efficiency, line current and hydraulic horsepower on both fast and slow speeds.