Abstract: Chemical and physical data on twenty binary uranium compounds that may prove suitable for refractory nuclear fuels were assembled. The compounds were those with aluminum, boron, carbon, iron, nickel, nitrogen, silicon, or sulfur. Too little is known at this time about the compounds to evaluate any of them for fuel. The program is being extended in an effort to provide the needed data.

From foreword: This report presents the preliminary design of a gamma irradiator intended for use as an experimental hospital sterilizer.

From introduction: "The ORNL-ANP liquid-to-liquid heat exchanger design and development effort has been based on an exceptionally high performance matrix of closely-spaced small diameter tubes that permits practically pure counter-flow operation. In the course of full-scale aircraft power plant design work a number of charts for this type of heat exchanger has been prepared. These charts were intended in part to show the effects of the various parameters in a readily understandable form, and in part to simplify and to reduce markedly the chore of making detailed design calculations. These charts have proved so helpful it seemed very worthwhile to assemble them into a report along with brief explanations and sample calculations."

From abstract: "On the 86-inch cyclotron a 41-kw beam has been calorimetered at a net ion loading efficiency of 40%; the average proton current was 1.85 ma at 22.5 Mev. Practical specific yields have been determined for (p,2n) reactions on zinc and bismuth. The investigation of products of proton-induced fission of uranium has been continued and new techniques are being used in measuring angular distribution of reaction products. The 63-inch heavy particle cyclotron is now in operation; N+++ particles have been accelerated to ~25 Mev. In preliminary tests, induced activities have been detected in carbon, nitrogen, and oxygen targets. A hot-cathode ion source is ready for test operation. The 22-inch cyclotron is being used in an investigation of the problems associated with the use of rf and dc electrodes for the acceleration of protons from the ion source into the dees. Radiation-induced corrosion in Inconel tubing containing #21 eutectic (ANP) has been produced by proton irradiation in the 86-inch cylclotron; it is shown that the corrosion was not due to thermal effects. Approximately 150 grams of highly purified U 238 (< 5 ppm U 235) have been prepared, and two grams of thorium 230 (ionium) has been enriched to 90.6%."

Technical report outlining the physical operability of 30% tributyl phosphate in a hydrocarbon dilutent for the extraction of uranium from more feed slurries. Operability had been satisfactorily demonstrated in jet mixing columns at the pilot plant of the Mallinckrodt Chemical Works. [From Abstract]

Introduction: In September of 156, Gilbert Associates, Inc., entered into a contract with the United States of America, acting through the United States Atomic Energy Commission, for the study and preliminary design of a nuclear power plant being considered for integration into a central station power system at an overseas site.

Abstract: Napier Drilling Company of Dallas, Texas drilled 53,998.0 feet for exploration purposes, under Contract No. AT(05-1)-256. This footage was drilled in 508 holes during the period from June 21, 1954 through May 13, 1955.

From introduction: The purpose of this paper is to present the geologic facts which have been discovered thus far about the Lukachukai area and to draw conclusions about uranium mineralization. Basic data of general nature are included to facilitate the work of future geologists in this area who may find the information applicable to new ideas.

Abstract: A low-level airborne radiometric survey of the younger pre-Cambrian Dripping Spring quartzite, undertaken in the mountainous region lying roughly 100 riles east of Phoenix, was completed June 3, 1955. Twenty-seven radioactive anomalies were located. To date seven of these have produced uranium ore, four more will probably become producers, and six others may possibly become producers. Flying was concentrated in the Dripping Spring quartzite, but reconnaissance flights were made over other formations. Private prospecting, both from the air and on the ground, increased considerably when the airborne project started. Eleven of the private discoveries have produced ore, and many others show considerable promise.

Introduction: "During the last quarter, members of the Chemical Development Group have been concerned with six major projects. (1) thermal and radiation properties of organic materials as moderators and coolants, (2) thermal and radiation stability of mirconium hydride, (e) reactor accessibility (transport of radioactive materials in cooling systems, ................. There have been, in addition, a number of smaller service projects, mostly of an analytical nature.:

The following report follows a test with the purpose of determining the effect upon image fidelity by exposing a television camera to high intensity radiation over an extended period. Provided later in the report are notes on the design of the utiliscope camera used for these tests due to notable design features.

The following report briefly covers broad general features of the chemical studies to be used by the Atomic Energy Commission in considering future work on the chemical studies of phosphate rock and shale.

The purpose of this report is to present information on materials which can possibly be employed in the HF-H₂O-H₂SO₄-system in the extractive distillation process to be investigated at NBL.

"In order to determine the factors involved in the scale-up of cores with concentric inlet and outlet pipes, a 48 inch carbon steel flow model, geometrically similar to a 6 foot diameter core, has been assembled and tested...Visual studies were made of dye and gas behavior in the sphere, and quantitative measurements of point residence times were obtained through the use of conductivity cells actuating a Brush recorder. Static pressure drop across the core was measured."

A report describing the methods and results of a chemical copper determination. A colorimetric method was considered the most feasible. Results and further discussion are provided in the report.

A simple method of solving for the phase shifts of the pion-proton scattering is presented. The rapid solution afforded can be utilized, as the Ashkin diagrams have been employed, to give starting values to an electronic computer or alternatively to analyze with more ease the variation of the phase shifts as a function of the input data in terms of the coefficients of the angular distributions. A new plot of a function of the total cross section versus the pion energy is introduced. The nearly straight line resulting should help to evaluate the experimental data.

The following handbook was made for the purpose of: (1) to give a semidetailed description of the testing reactor, and (2) to explain, in so far as possible, the reasons for the design.

The following report analyzes and calculates the accuracy of a procedure that processes independent source neutron cards in the Monte Carlo method.

The following document describes x-ray diffraction measurements for an approximate crystal structure for the beta phase of metallic uranium.

The following report analyzes the characteristics of eight chelated uranium complexes and seven uranium ammines, prepared from the reaction of organic solutions of uranium salts with complexing agents and organic bases.

Abstract: "The heat of solution of thorium sesquisulfide was determined in 6.000 molar HCl at 25 C to ascertain the stability of the thorium (III) halides. The molal heat of formation of Th2S3 from rhombic sulfur and crystalline thorium is calculated as 258.6 kcal."

This report follows a study that was undertaken to evaluate the practicality if removing the heat from the reactor cooling water by means of a "flash cooler" and to compare its economics with that of the conventional heat exchange system.

The following report discusses the production of three types of fluorine cells for the Manhattan Project's fluorine generation program: the high temperature fluorine cell operating at a temperature of 240 C., the low temperature cell operating at a temperature of 30 C., and the medium temperature cell operating at a temperature of 100 C.

This is a preliminary report on a multigroup's analysis on the IBM 604, a programmable Electronic Calculating Punch, as part of the course work W31-Eng. 52.