From introduction: The study of cyclotron-magnet design presented here is directed toward attaining a large ratio of energy in the ion beam with respect to cost. Alternatively, the goal may be regarded as a smaller, more convenient apparatus. These two objectives are not completely incompatible; a design that is more economical than the usual is also smaller. The best design of a cyclotron can be obtained only by considering the problem as a whole. The conditions necessary to maintain an ion beam, the conditions required for the operation of the oscillator, and a host of other problems influence the design of the magnet. It is assumed in this paper that the "other problems" can be satisfactorily solved, if the gap has a suitable geometry and the field a suitable space dependence.

From summary: The procedure has been to search for areas in which nonpedogenic calcrete or gypcrete may have developed and where additional study or exploration might be justified.

Technical report. Long-time tests have been made on the effect of various types of radiation on the corrosion of 2S aluminum in simulated W water. In no case was any acceleration of corrosion by the radiation observed; the effect of radiation, if any, appeared to be a protective one. Deuteron irradiation did accelerate the corrosion of mild steel at low flow rates in hot water of pH 6 to 7, but no appreciable effect was observed with copper, stainless steel, or tuballoy. The general theory of the effect of radiation on corrosion is discussed, with the conclusion that no acceleration of corrosion by radiation is to be expected in most cases of practical interest.

Abstract: Uranium-vanadium ore has long been known in the Trachyte district. Production started in 1913 and has been erratic and intermittent to date. Until recently, practically all production from the Henry Mountains area has come from the Trachyte district.

This is a progress report on the carbonate process, compiled by the chemical development department of the Carbide and Carbon Chemicals Corporation's Y-12 plant, covering the month of September, 1949. In the previous month, the problem of immediate interest to the Monticello operation were listed. Projects that were left incomplete during that time were continued during this month, as well as a brief investigation of the process in which raw ore is leached with sodium carbonate, the sands and slime separated, the sands leached with acid, and the slimes roasted in a pellitized form.

The following report analyzes different values and measurements that give the same results for the captured cross section of thermal neutrons for Si.

Abstract: "An accurate calculation is given for the quantity which corresponds to the diffusion length in the theory of the pile. The procedure is to establish a relationship between the diffusion length and the change in thermal utilization from a pile with infinite sides to one with sides of a finite length. The calculation of this change in the thermal utilization is then carried through. Approximation to the answer and numerically exact calculations are given in the report. The results show that for radif very near the optimum values the exact diffusion length is slightly larger than the one obtained from the usual formula...However, over most of the range of radii the exact diffusion length is smaller than the approximate one."

"These notes are intended to serve as a summary of the current knowledge of properties of materials. In the future some need may exist for related information on methods od testing, design and fabrication. This issue presents information on thorium with subdivisions..."

The following report presents data from the investigations on discovering factors affecting the precipitation of tubanyl peroxide from Alpha and Beta gunk solutions at reduced temperatures.

Summary: "An apparatus is described which applies alternate pulses from two ion beams to a galvanometer network. The isotopic ratio is read directly from a potentiometer. The comparison is independent of ion beam intensity. This method is not practical for application to the standard Nier assay instrument because of the low ion currents normally used. It is suggested that this comparison method may have utility in a spectrometer utilizing a high intensity ion source such as capillary ore or condensed spark."

Report of geological investigations of the Trachyte District of the Henry Mountains in Utah

Discussing photographs of rocks from Basalt Mesa

To obtain a better understanding of the mechanism involved in scaling behavior of zirconium, kinetic studies were made of the weight pickup in air after the following pretreatments; (1) exposure to oxygen or nitrogen, (2) exposure to air, oxygen or nitrogen and removal of the resulting surface compounds.

A report about anomalous low temperature thermal conductivity of grapnite samples.

This memorandum presents the process design for the solvent reast area of the Feed Materials Production Center. The purpose ofthe transmittal is to provide the basis for the detailed mechanical design and layout of this section of the refinery. Drawings, flowsheets, and specifications are included.

Abstract. In order to anticipate radiation - chemical effects in solutions of active lanthanum, various solutions and suspensions containing lanthanum were irradiated with an electron beam. Separation of lanthanum from barium by the alcoholic HCl method is not rendered less efficient by radiation, although considerable gas evolution occurs. Suspensions of lanthanum as hydroxide and as ferrocyanide are not appreciably solubilized by radiation. Lanthanum oxalate is decomposed by radiation, is partially thrown into solution, and finally dissolves completely when all the excess oxalate ion in the solution has been destroyed.

Discussing the occurrence of uranium deposits in the Pryor-Bighorn Mountains.

Discussing recommendations for diamond drilling in the four aces prospect in White Canyon, Utah.

The object of the work done during the month of June has been to assure that deposition of chemically pure chromium metal by gas plating, both by itself, or as a component of nickel-chronium and/or other alloys.

"The diffusivities of Fe, Co, and Al in otherwise pure Au were determined by a residual activity technique. It was found that the frequency factors and activation energies of the transition elements into Au are normal relative to the values for Au self-diffusion, and suggest that lattice diffusion is operative, in contrast to the corresponding situation for the diffusion of these elements in Al. This difference in behavior is explained in terms of the marked difference in solid solubilities in the two series."

The self-diffusivities of Co60 and Ni63 in cobalt--nickel solid solutions exhibit a greater activation energy below the Curie temperature (T/sub c/) than above. Values of DELTA Q = Q (ferromagnetic) -- Q (paramagnetic) are approximately equal to RT/sub c/. This observation is interpreted to indicate that the increment in activation energy arises from an increase in the formation energy of a vacancy in the ferromagnetic lattice, with the additional binding energy arising from the interaction of a spin with the Weiss field."

The purpose of the test was to determine the responses of the plant when subjected to load transients exceeding the design magnitudes, and to determine the maximum load changes, positive or negative, that the plant can sustain. The reactor plant responded satisfactorily to all load transients. The only limits exceed were the pressurizer high and low level alarm points. The magnitude of the transients and the time required for the plant to return to equilibrium was dependent upon the size of the the load change. The pressurizer spray was effective in reducing reactor coolant pressure positive surges; however, this resulted in larger negative surges than when the spray valve was closed.

"The effects of radiation emission on the motion of electrons in high energy synchrotrons are analyzed. The damping rates and quantum excitation of the three principal modes of oscillation are derived for strong focusing and constant gradient accelerators. Methods for correcting the radiation effects for strong focusing accelerators are discussed."

The definition of the Lebesgue integral is used to develop a numerical integration method in which the integral is evaluated directly from a contour plot of the function. It is useful in working from weather maps, potential surfaces, etc., but was particularly designed to assist in reducing blast diffraction space-time diagrams to simple, meaningful quantities.