Technical report. From Abstract : "The acidity of a solution of acid, HX, and salt, MX, is affected by both the concentration of X- and M+ owing to incomplete dissociation of the salt, MX. it was possible to increase the acidity of a solution of 2,6-di-tert-butylphenol - tetrabutylammonium 2,6-di-tert-butylphenolate relative to a dilute solution of tetrabutylammonium hydroxide by increasing the tetrabutylammonium bromide content. This indicates that the dissociation constant of the hydroxide base is sufficiently large that extensive dissociation occurs in dilute solutions. The addition of tetrabutylammonium bromide is therefore recommended as a general method for increasing the acidity and improving the titration characteristics of extremely weak acids."

Technical report describing and evaluating the the three experimental methods for obtaining equation of state data at low temperatures; (1) approximate measurement of the PVT relationship by a piston-displacement technique, (2) the measurement of a heat capacity at constant volume as a function of molar volume and temperature, and (3) direct measurement of the pressure variation of the elastic constants using ultrasonic techniques. X-ray methods also might be applicable.

Technical report. From Abstract : "Bis(di-2-ethylbutylphosphinyl)methane, EBDPM, forms complexes with uranium (VI) nitrate and thorium (IV) nitrate in which EBDPM acts as a bidentate ligand and the nitrato groups appear to be coordinated. The complex with uranium (VI) is a monomer, UO2(NO3)29EBDPM), while the complex with thorium in a dimer, [Th(NO3)4]2(EBDPM)3. Both complexes are of high thermal stability."

Technical report. From Abstract : "The scandium-yttrium and scandium-zirconium were studied by thermal and x-ray methods. Both systems are characterized by complete solid solubility in the low temperature hexagonal form and in the high temperature bcc form. In the Sc-Y system, there is a minimum in the solidus at 50 at. pct and 1365°C, while the solidus in the Sc-Zr system follows a nearly straight line relationship between the melting point of scandium and zirconium. There is a minimum in the temperature of transition from hexagonal to bcc in the Sc-Y system at 43 at. pct Y and 1175°C; while the temperature of transition is raised in the Sc-Zr system to a maximum of 1415°C at 30 at. pct Zr."

Technical report. From Summary : "At the present time arsenazo appears to be widely used for the spectrophotometric determination of rare earths. Unfortunately, the method is not selective. The separation of rare earths and yttrium from interfering elements has been studied, and the following method has been proposed. Rare earths are precipitated as fluorides using fluorides using calcium fluoride as the carrier. Thorium and zirconium are removed by extraction with thenoyltrifluoroacetone (TTA) in xylene at pH 1.3. Small amounts of residual aluminum, iron, etc. are removed by extraction with 8-quinolinolchloroform at pH 4.5. Rare earths are separated from calcium by TTA extraction at the same pH, and they are then back-extracted into 1 M nitric acid. After evaporation of the solution, the rare earths are determined spectrophotometrically with arsenazo."

Technical report. From Abstract : "The silver-1,10-phenanthroline system has been studied and the stability constants determined for the 1:1 and 2:1 complexes using the silver electrode. This known system was then used to study the complexes of 1,10-phenanthroline with other metals. The log βn values found for the over-all stoichiometric stability constants are as follows: Ag, 5.02, 12.07; Mn, 3.88, 7.04, 10.11; Cd, 5.93, 10.52, 14.30; Zn, 6.83, 12.05, 16.92. The stoichiometric stability constants determined for copper are log k2 = 6.42 and log k2k3 = 11.05."