This report presents a brief survey of the uses of sheet-metal coverings in conjunction with the inner structure. A method of construction is presented as well as a discussion on the strength of sheet metal.

This report tries to give a comprehensive survey of the most important propeller problems such as the shape of propellers and the effect of atmospheric conditions on propeller performance.

From Introduction: "The increasing use of airplane wings equipped with ailerons and the importance of knowing the aerodynamic characteristics of tail units (empennages) provided with movable parts (rudders and elevators) impart some interest to the so-called "empirical profiles." For this purpose we thought best to employ the method proposed by Munk for the approximate theoretical study of thin, slightly curved profiles, assimilable, from an aerodynamic view-point, to their mean camber line."

"In the present paper I shall not consider the problem of the best arrangement of airplane and propeller, but only a simple method for designing a propeller for a given arrangement of airplane parts. The inflow to the propeller and hence the efficiency of the propeller is affected most by the fuselage. The effect of the wings and of the other parts lying in the propeller slip stream is much less and is also more difficult to determine" (p. 1-2).

"This report gives the results of the second portion of an investigation in the twenty-foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics, on the cowling and cooling of a "Whirlwind" J-5 radial air-cooled engine. The first portion pertains to tests with a cabin fuselage. This report covers tests with several forms of cowling, including conventional types, individual fairings behind the cylinders, individual hoods over the over the cylinders, and the new N. A. C. A. complete cowling, all on an open cockpit fuselage. Drag tests were also made with a conventional engine nacelle, and with a nacelle having the new complete cowling" (p. 191).

From Summary: "In Technical Report no. 247 of the National Advisory Committee for Aeronautics theoretical formulas are given from which was computed a table for the pressure of air on coming to rest from various speeds, such as those of aircraft and propeller blades. In that report, the table gave incompressible and adiabatic stop pressures of air for even-speed intervals in miles per hour and for some even-speed intervals in knots per hour. Table II of the present report extends the above-mentioned table by including the stop pressures of air for even-speed intervals in miles per hour, feet per-second, knots per hour, kilometers per hour, and meters per second."

Part I gives a general method for finding the steady-flow velocity relative to a body in plane curvilinear motion, whence the pressure is found by Bernoulli's energy principle. Integration of the pressure supplies basic formulas for the zonal forces and moments on the revolving body. Part II, applying this steady-flow method, finds the velocity and pressure at all points of the flow inside and outside an ellipsoid and some of its limiting forms, and graphs those quantities for the latter forms. Part III finds the pressure, and thence the zonal force and moment, on hulls in plane curvilinear flight. Part IV derives general equations for the resultant fluid forces and moments on trisymmetrical bodies moving through a perfect fluid, and in some cases compares the moment values with those found for bodies moving in air. Part V furnishes ready formulas for potential coefficients and inertia coefficients for an ellipsoid and its limiting forms. Thence are derived tables giving numerical values of those coefficients for a comprehensive range of shapes.

This is the second of a series of investigations to determine water pressure distribution on various types of seaplane floats and hulls, and was conducted on a twin-float seaplane. It consisted of measuring water pressures and accelerations on a TS-1 seaplane during numerous landing and taxiing maneuvers at various speeds and angles. The results show that water pressures as great as 10 lbs. per sq. in.may occur at the step in various maneuvers and that pressures of approximately the same magnitude occur at the stern and near the bow in hard pancake landings with the stern way down. At the other parts of the float the pressures are less and are usually zero or slightly negative for some distance abaft the step. A maximum negative pressure of 0.87 lb. Per square inch was measured immediately abaft the step. The maximum positive pressures have a duration of approximately one-twentieth to one-hundredth second at any given location and are distributed over a very limited area at any particular instant.

This report describes a simple method for calculating the position of the elastic axis of a wing structure having any number of spars. It is shown that strong drag bracing near the top and bottom of a wing greatly increases the torsional strength. An analytical procedure for finding the contribution of the drag bracing to the torsional strength and stiffness is described, based upon the principle of least work, and involving only one unknown quantity. A coefficient for comparing the torsional rigidity of different wings is derived in this report.

This research on the pressure variations in the injection system of the N.A.C.A. Spray Photography Equipment and on the effects of these variations on the motion of the timing valve stem was undertaken in connection with the study of fuel injection systems for high-speed oil engines. The methods of analysis of the pressure variations and the general equation for the motion of the spring-loaded stem for the timing valve are applicable to a spring-loaded automatic injection valve, and in general to all hydraulically operated valves. A sample calculation for a spring-loaded automatic injection valve is included.

Typed copy of a report from the newspaper "El Comercio" on a statement by guerilla Jose Parade. It regards the death of a mining manager in Sandinista custody, the whereabouts of Augusto César Sandino, and the return of three US Marines' bodies to American forces.