This paper summarizes an analysis of the U.S.-Russian Nuclear Material Protection, Control and Accounting (MPC&A) Program, developed on the basis of extensive discussions with U.S. laboratory participants as well as personal experience. Results of the discussions have been organized into three main areas: Technical/MPC&A Progress; Programmatic and Administrative Issues; and Professional Aspects, Implications for MPC&A effectiveness, for MPC&A sustainability, and for future relations and collaboration are derived. Suggested next steps are given.

The first observation of the decay K{sup +} {yields} {pi}{sup +}{nu}{ovr {nu}} has been reported. The E787 experiment presented evidence for the K{sup +} {yields} {pi}{sup +}{nu}{ovr {nu}} decay, based on the observation of a single clean event from data collected during the 1995 run of the AGS (Alternating Gradient Synchrotron at Brookhaven National Laboratory). The branching ratio indicated by this observation, B(K{sup +} {yields} {pi}{sup +}{nu}{ovr {nu}}) = 4.2{sub -3.5}{sup +9.7} x 10{sup -10}, is consistent with the Standard Model expectation although the central experimental value is four times larger. The final E7878 data sample, from the 1995-98 runs, should reach a sensitivity of about five times that of the 1995 run alone. A new experiment, E949, has been given scientific approval and should start data collected in 2001. It is expected to achieve a sensitivity of more than an order of magnitude below the prediction of the Standard Model.

Renewable energy solutions for village power applications can be economical, functional, and sustainable. Pilot projects are an appropriate step in the development of a commercially viable market for rural renewable energy solutions. Moreover, there are a significant number of rural electrification projects under way that employ various technologies, delivery mechanisms, and financing arrangements. These projects, if properly evaluated, communicated, and their lessons incorporated in future projects and programs, can lead the way to a future that includes a robust opportunity for cost-effective, renewable-based village power systems. This paper summarizes some of NRELs recent experiences and lessons learned.

None

None

A photoelectrochemical solar cell that is based on the dye-sensitization of thin nanocrystalline films of TiO2 (anatase) nanoparticles in contact with a non-aqueous liquid electrolyte is described. The cell, fabricated at NREL, shows a conversion efficiency of -9.2% at AM1.5, which approaches the best reported value of 10%-11% by Grtzel at EPFL in Lausanne, Switzerland. The femtosecond (fs) pump-probe spectroscopy has been used to time resolve the injection of electrons into the conduction band of nanocrystalline TiO2 films under ambient conditions following photoexcitation of the adsorbed Ru(11)-complex dye. The measurement indicates an instrument-limited -50 fs upper limit on the electron injection time. We also report the sensitization of nanocrystalline TiO2 by a novel iron-based dye, CIS-[Fe 11 (2,2'-bipyridine-4,4'-dicarboxylic acid)2 (CN)2], a chromophore with an extremely short-lived, nonemissive excited state. The dye also exhibits a unique"band selective" sensitization through one of its two absorption bands. The operational principle of the device has been studied through the measurement of electric field distribution within the device structure and studies on the pH dependence of dye-redox potential. The incorporation of WO3 -based electrochromic layer into this device has led to a novel photoelectrochromic device structure for"smart window" application.

We are developing and building the ''Mercury'' laser system as the first in a series of a new generation of diode-pumped solid-state lasers (DPSSL) for advanced high energy density (HED) physics experiments at LLNL. Mercury will be the first integrated demonstration of a scalable laser architecture compatible with advanced Inertial Confinement Fusion (ICF) goals. Primary performance goals include 10% efficiencies at 10 Hz and a <10 ns pulse with l {omega} energies of 100 J and with 2 {omega}/3 {omega} frequency conversion. Achieving this performance will provide a near term capability for HED experiments and prove the potential of DPSSLs for inertial fusion energy (IFE).

Thin-walled, compliant plastic structures for meso-scale fluidic systems were fabricated, tested and used to demonstrate valving, pumping, metering and mixing. These structures permit the isolation of actuators and sensors from the working fluid, thereby reducing chemical compatibility issues. The thin-walled, compliant plastic structures can be used in either a permanent, reusable system or as an inexpensive disposable for single-use assay systems. The implementation of valving, pumping, mixing and metering operations involve only an elastic change in the mechanical shape of various portions of the structure. Advantages provided by the thin-walled plastic structures include reduced dead volume and rapid mixing. Five different methods for fabricating the thin-walled plastic structures discussed including laser welding, molding, vacuum forming, thermal heat staking and photolithographic patterning techniques.

The 242-A Evaporator is the primary waste evaporator for the Hanford Site radioactive liquid waste stored in underground double-shell tanks. Low pressure evaporation is used to remove water from the waste, thus reducing the amount of tank space required for storage. The process produces a concentrated slurry, a process condensate, and an offgas. The offgas exhausts through two stages of high-efficiency particulate air (HEPA) filters before being discharged to the atmosphere 40 CFR 61 Subpart H requires assessment of the unfiltered exhaust to determine if continuous compliant sampling is required. Because potential (unfiltered) emissions are not measured, methods have been developed to estimate these emissions. One of the methods accepted by the Environmental Protection Agency is the measurement of the accumulation of radionuclides on the HEPA filters. Nondestructive assay (NDA) was selected for determining the accumulation on the HEPA filters. NDA was performed on the HEPA filters before and after a campaign in 1997. NDA results indicate that 2.1 E+4 becquerels of cesium-137 were accumulated on the primary HEPA 1700 filter during the campaign. The feed material processed in the campaign contained a total of 1.4 E+l6 Bq of cesium-137. The release factor for the evaporator process is 1.5 E-12. …

The US Department of Energy (DOE) has initiated remediation for stored high-level radioactive wastes. At the DOE Hanford site in southeastern Washington, 149 large underground tanks contain such wastes, generated by various chemical processes during the manufacture of plutonium for nuclear weapons. One of the key steps in this remediation effort is to characterize the waste stored in these tanks so that it can be treated properly and safely. A number of samples have been extracted from a subset of the tanks and analyzed for various chemical and radiological constituents. The analytical results were used to cluster tanks into groups with similar waste compositions. The tank groups determined by clustering of the analytical data are compared to tank groups determined using process-based historical models. Agreement between the two grouping strategies may reduce the number of samples required to characterize the waste in a tank, and perhaps support the use of the historical models to characterize tanks that have not been sampled. A successful implementation of this approach with one tank group is described here. This particular case yielded DOE significant savings of characterization resources.

This report contains vugraphs of presentations given at the meeting. The topics covered include the following: FFTF Deactivation Strategy; Sodium Drain and Disposition; Sodium Processing; and Fuel Storage and Disposition.

This paper presents several innovative and common sense approaches to pollution prevention that have been employed during facility deactivation at the Hanford Site in South Central Washington. It also presents several pollution prevention principles applicable to other projects. Innovative pollution prevention ideas employed at the Hanford site during facility deactivation included: (1) Recycling more than 185,000 gallons of radioactively contaminated nitric acid by sending it to an operating nuclear fuels reprocessing facility in England; (2) Recycling millions of pounds of chemicals and excess materials to other industries for reuse; (3) Evaporating flush water at a low rate and discharging it into the facility exhaust air stream to avoid discharging thousands of gallons of liquid to the soil column; and (4) Decontaminating and disposing of thousands of gallons of radioactively contaminated organic solvent waste to a RCRA licensed, power-producing, commercial incinerator. Common sense pollution prevention ideas that were employed include recycling office furniture, recycling paper from office files, and redeploying tools and miscellaneous process equipment. Additional pollution prevention occurred as the facility liquid and gaseous discharge streams were deactivated. From the facilities deactivation experiences at Hanford and the ensuing efforts to disposition excess chemicals and materials, several key pollution prevention principles …

Lockheed Martin Hanford Corporation is developing and implementing an integrated technical baseline for cleaning up environmental contamination at the Hanford Site in Washington State. The Hanford Site is located in Washington State and has been referred to as one of the largest Environmental Cleanup challenges in the US. It became contaminated with radioactive and dangerous wastes during the 40+ years it was being used to produce weapons grade plutonium in support of the US nuclear weapons program (See Figure 1). The US Department of Energy (US DOE) is responsible for cleanup of the Hanford Site with the Environmental Protection Agency (EPA) and the Washington State Department of Ecology (Ecology) both providing regulatory oversight. The US DOE, EPA and Ecology entered into an agreement in 1989 (Hanford Federal Facility Agreement and Consent Order, commonly referred to as the Tri-Party Agreement) that provides the framework for cleanup of the Hanford Site. However, since the inception of the Tri-Party Agreement, there have been numerous changes due to technical issues, funding issues, and priority changes within the cleanup mission. As a result, progress on the definition and execution of the cleanup work has been slower than anticipated and has resulted in some false starts, …

Waste processing and preparing waste to support waste processing relies heavily on ventilation. Ventilation is used at the Hanford Site on the waste storage tanks to provide confinement, cooling, and removal of flammable gases.

Oil based aerosol ``Smoke`` commonly used for testing the efficiency and penetration of High Efficiency Particulate Air filters (HEPA) and HEPA systems can produce flammability hazards that may not have been previously considered. A combustion incident involving an aerosol generator has caused an investigation into the hazards of the aerosol used to test HEPA systems at Hanford.

As the systems engineering activities at the US Department of Energy`s Hanford reservation have matured, they have been placed in many positions within the management structure. Some of these have been more successful than others. This paper describes the organizational evolution of systems engineering over the last few years to its current successful configuration. Background The US Department of Energy (DOE) owns the 640 square mile Hanford reservation located in southeast Washington State (Figure 1). The Site has been operated for DOE by a team of contractors, who read like a Who`s Who in American Industry. Throughout its history from its founding in 1943 until 1991, Hanford`s primary mission was to produce special nuclear material for the nuclear weapons program. This mission resulted in significant quantities of radioactive and mixed waste that is stored on the site in a variety of forms. In addition much of the surface area, subsurface soil, and groundwater are contaminated to various degrees. The Reservation is located on the banks of the Columbia River, and the avoidance of contaminating the waterway that services the Pacific Northwest is a national concern. In 1991, the mission of the Hanford Site was changed from production to environmental cleanup. …

The Project Hanford Management Contract called for the enhancement of site-wide decision processes, and development of a Hanford Risk Management Plan to adopt or develop a risk management system for the Hanford Site. This Plan provides a consistent foundation for Site issues and addresses site-wide management of risks of all types. It supports the Department of Energy planning and sitewide decision making policy. Added to this requirement is a risk performance report to characterize the risk management accomplishments. This paper presents the development of risk management within the context of work planning and performance. Also discussed are four risk elements which add value to the context.

This paper describes the operational experience in drying brines generated at a radioactive wastewater treatment facility. The brines are composed of aqueous ammonium sulfate/sodium sulfate and aqueous sodium nitrate/sodium sulfate, The brine feeds receive pretreatment to preclude dryer bridging and fouling. The dryer products are a distillate and a powder. The dryer is a vertical thin film type consisting of a steam heated cylinder with rotor. Maintenance on the dryer has been minimal. Although many operability problems have had to be overcome, dryer performance can now be said to be highly reliable.

None

Extracellular matrix and extracellular matrix-degrading matrix metalloproteinases play a key role in interactions between the epithelium and the mesenchyme during mammary gland development and disease. In patients with breast cancer, the mammary mesenchyme undergoes a stromal reaction, the etiology of which is unknown. We previously showed that targeting of an autoactivating mutant of the matrix metalloproteinase stromelysin-1 to mammary epithelia of transgenic mice resulted in reduced mammary function during pregnancy and development of preneoplastic and neoplastic lesions. Here we examine the cascade of alterations before breast tumor formation in the mammary gland stroma once the expression of the stromelysin-1 transgene commences. Beginning in postpubertal virgin animals, low levels of transgene expression in mammary epithelia led to increased expression of endogenous stromelysin-1 in stromal fibroblasts and up-regulation of other matrix metalloproteinases, without basement membrane disruption. These changes were accompanied by the progressive development of a compensatory reactive stroma, characterized by increased collagen content and vascularization in glands from virgin mice. This remodeling of the gland affected epithelial-mesenchymal communication as indicated by inappropriate expression of tenascin-C starting by day 6 of pregnancy. This, together with increased transgene expression, led to basement membrane disruption starting by day 15 of pregnancy. We propose that …

Tumor cell invasion relies on cell migration and extracellular matrix proteolysis. We investigated the contribution of different integrins to the invasive activity of mouse mammary carcinoma cells. Antibodies against integrin subunits {alpha}6 and {beta}1, but not against {alpha}1 and {alpha}2, inhibited cell locomotion on a reconstituted basement membrane in two-dimensional cell migration assays, whereas antibodies against {beta}1, but not against a6 or {alpha}2, interfered with cell adhesion to basement membrane constituents. Blocking antibodies against {alpha}1 integrins impaired only cell adhesion to type IV collagen. Antibodies against {alpha}1, {alpha}2, {alpha}6, and {beta}1, but not {alpha}5, integrin subunits reduced invasion of a reconstituted basement membrane. Integrins {alpha}1 and {alpha}2, which contributed only marginally to motility and adhesion, regulated proteinase production. Antibodies against {alpha}1 and {alpha}2, but not {alpha}6 and {beta}1, integrin subunits inhibited both transcription and protein expression of the matrix metalloproteinase stromelysin-1. Inhibition of tumor cell invasion by antibodies against {alpha}1 and {alpha}2 was reversed by addition of recombinant stromelysin-1. In contrast, stromelysin-1 could not rescue invasion inhibited by anti-{alpha}6 antibodies. Our data indicate that {alpha}1 and {alpha}2 integrins confer invasive behavior by regulating stromelysin-1 expression, whereas {alpha}6 integrins regulate cell motility. These results provide new insights into the specific functions …

None

The ¹H(e,e'K⁺)Lambda reaction was studied as a function of the squared four-momentum transfer, Q², and the virtual photon polarizations. The Q² dependence of the sigma-L/sigma-T ratio differs significantly from current theoretical predictions. This, combined with the precision of the measurement, implies a need for revision of existing calculations.

The skeletal structure of aerogel is determined before, during, and after the gel is formed. Supercritical drying of aerogel largely preserves the pore structure that is determined near the time of gelation. To better understand these gel formation mechanisms we carried out measurements of the time evolution of light scattering in a series of gels prepared without conventional acid or base catalysis. Instead, ultraviolet light was used to catalyze the formation of silica gels made from the hydrolysis of tetraethylorthosilicate and partly prehydrolyzed tetraethylorthosilicate in ethanol. Time evolution of light scattering provides information regarding the rate and geometrical nature of the assembly of the primary silica particles formed in the sol. UV-catalyzed gels show volumetric growth typical of acid-catalyzed gels, except when UV exposure is discontinued at the gel point, where gels then show linear chain formation typical of base-catalyzed gels. Long term UV exposure leads to coarsening of the pore network, a decrease in the clarity of the aerogel, and an increase in the surface area of the aerogel. Additionally, UV exposure up to the gel point leads to increased crystallinity in the final aerogel.