In part 1, we describe how the creation of quasiparticles by current flow through a normal-insulator-superconductor (NIS) junction degrades the cooling performance of the junction. Degradation occurs due to the absorption of recombination phonons in the normal electrode and due to a reduction in the cooling power. In part 2, we describe how vibrations from a pulse tube mechanical cooler affect X-ray measurements performed with a superconducting tunnel junction.

The Strategic Power Utilities Group (SPUG) of the National Power Corporation (NPC) in the Philippines owns and operates about 100 power plants, mostly fueled by diesel, ranging in energy production from about 15 kilowatt-hours (kWh)/day to 106,000 kWh/day. Reducing the consumption of diesel fuel in these plants, along with the associated financial losses, is a priority for SPUG. The purpose of this study is to estimate the potential fuel and cost savings that might be achieved by retrofitting hybrid power systems to these existing diesel plants. As used in this report, the term ''hybrid system'' refers to any combination of wind turbine generators (WTGs), photovoltaic (PV) modules, lead-acid batteries, and an AC/DC power converter (either an electronic inverter or a rotary converter), in addition to the existing diesel gensets. The resources available for this study did not permit a detailed design analysis for each of the plants. Instead, the following five-step process was used: (1) Tabulate some important characteristics of all the plants. (2) Group the plants into categories (six classes) with similar characteristics. (3) For each class of system, identify one plant that is representative of the class. (4) For each representative plant, perform a moderately detailed prefeasibility analysis …

This article discusses the advantages and disadvantages of using computer modeling to study physiology, and provides an example of how students can begin to use computer modeling in the classroom.

The U.S. Department of Energy (DOE), Office of Environmental Management (EM) has responsibility for cleanup and disposition of nuclear wastes and excess materials that are a legacy of the nuclear arms race. In fulfilling this responsibility, EM applies a systems engineering approach to identify baseline disposition plans for the wastes and materials (storage, stabilization, treatment, and disposal), assess the path viability, and develop integration opportunities to improve the disposition viability or to combine, eliminate, and/or simplify activities, technologies, and facilities across the DOE Complex, evaluate the baseline and alternatives to make informed decisions, and implement and track selected opportunities. This paper focuses on processes used to assess the disposition path viability - the likelihood that current planning for disposition of nuclear waste and materials can be implemented.

Ultrasonic waves form a useful nondestructive evaluation (NDE) probe for determining physical, microstructural, and mechanical properties of materials and parts. Noncontacting laser ultrasonic methods are desired for remote measurements and on-line manufacture process monitoring. Researchers at the Idaho National Engineering & Environmental Laboratory (INEEL) have developed a versatile new method for detection of ultrasonic motion at surfaces. This method directly images, without the need for scanning, the surface distribution of subnanometer ultrasonic motion. By eliminating the need for scanning over large areas or complex parts, the inspection process can be greatly speeded up. Examples include measurements on parts with complex geometries through resonant ultrasound spectroscopy and of the properties of sheet materials determined through anisotropic elastic Lamb wave propagation. The operation and capabilities of the INEEL Laser Ultrasonic Camera are described along with measurement results.

This paper presents our assessment of field experience related to pressurized water reactor (PWR) primary system leaks in terms of their number of rates, how aging affects frequency of leak events, the safety significance of such leaks, industry efforts to reduce leaks, and effectiveness of current leak detection systems. We have reviewed the licensee event reports to identify the events that took place during 1985 to the third quarter of 1996, and reviewed related technical literature and visited PWR plants to analyze these events. Our assessment shows that USNRC licensees have taken effective actions to reduce the number of leak events. One main reason for this decreasing trend was the elimination or reportable leakages from valve stem packing after 1991. Our review of leak events related to vibratory fatigue reveals a statistically significant decreasing trend with age (years of operation), but not in calendar time. Our assessment of worldwide data on leakage caused by thermal fatigue cracking is that the fatigue of aging piping is a safety significant issue. Our review of leak events has identified several susceptible sites in piping having high safety significance; but the inspection of some of these sites is not required by the ASME Code. …

A noncontacting ultrasonic method has been investigated for probing the solidification front in molten titanium for the purposes of profiling the channel depth in plasma hearth re-melter. The method, known as Laser Ultrasonics, utilized a pulsed laser for generation of ultrasonic waves at the surface of a molten metal pool. The ultrasonic waves propagated into the liquid titanium reflected from the solidification front and the boundaries of the solid plug. A Fabry-Perot interferometer, driven by a second laser, demodulated the small displacements caused by the ultrasonic wave motion at the liquid surface. The method and results of measurements taken within a small research plasma melting furnace will be described. Successful results were obtained even directly beneath the plasma arc using this all optical approach.

The purpose of this workshop was to develop technical background facts necessary for planning continued research and development of Enhanced Geothermal Systems (EGS). EGS are geothermal reservoirs that require improvement of their permeability or fluid contents in order to achieve economic energy production. The initial focus of this R&D program is devising and testing means to extract additional economic energy from marginal volumes of hydrothermal reservoirs that are already producing commercial energy. By mid-1999, the evolution of the EGS R&D Program, begun in FY 1988 by the U.S. Department of Energy (DOE), reached the stage where considerable expertise had to be brought to bear on what technical goals should be pursued. The main purpose of this Workshop was to do that. The Workshop was sponsored by the Office of Geothermal Technologies of the Department of Energy. Its purpose and timing were endorsed by the EGS National Coordinating Committee, through which the EGS R&D Program receives guidance from members of the U.S. geothermal industry. Section 1.0 of this report documents the EGS R&D Program Review Session. There, managers and researchers described the goals and activities of the program. Recent experience with injection at The Geysers and analysis of downhole conditions at …

An analysis was performed of the safety-related performance of the reactor protection system (RPS) at U. S. General Electric commercial reactors during the period 1984 through 1995. RPS operational data were collected from the Nuclear Plant Reliability Data System and Licensee Event Reports. A risk-based analysis was performed on the data to estimate the observed unavailability of the RPS, based on a fault tree model of the system. Results were compared with existing unavailability estimates from Individual Plant Examinations and other reports.

The Simplified Risk Model Version II (SRM-II) is a quantitative tool for efficiently evaluating the risk from Department of Energy waste management activities. Risks evaluated include human safety and health and environmental impact. Both accidents and normal, incident-free operation are considered. The risk models are simplifications of more detailed risk analyses, such as those found in environmental impact statements, safety analysis reports, and performance assessments. However, wherever possible, conservatisms in such models have been removed to obtain best estimate results. The SRM-II is used to support DOE complex-wide environmental management integration studies. Typically such activities involve risk predictions including such activities as initial storage, handling, treatment, interim storage, transportation, and final disposal.

A high integrity can (HIC), designed to meet the ASME Boiler and Pressure Vessel Code (Section III, Div.3, static conditions) is proposed for the interim storage and repository disposal of Department of Energy (DOE) spent nuclear fuel. The HIC will be approximately 5 3/8 inches (134.38mm) in outside diameter with 1/4 inch (6.35mm) thick walls, and have a removable lid with a metallic seal that is capable of being welded shut. The opening of the can is approximately 4 3/8 inches (111.13mm). The HIC is primarily designed to contain items in the DOE SNF inventory that do not meet acceptance standards for direct disposal in a geologic repository. This includes fuel in the form of particulate dusts, sectioned pieces of fuel, core rubble, melted or degraded (non-intact) fuel elements, unclad uranium alloys, metallurgical specimens, and chemically reactive fuel components. The HIC is intended to act as a substitute cladding for the spent nuclear fuel, further isolate problematic materials, provide a long-term corrosion barrier, and add an extra internal pressure barrier to the waste package. The HIC will also delay potential fission product release and maintain geometry control for extended periods of time. For the entire disposal package to be licensed …

The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose …

An analysis was performed of the safety-related performance of the reactor protection system (RPS) at U. S. Westinghouse commercial reactors during the period 1984 through 1995. RPS operational data were collected from the Nuclear Plant Reliability Data System and Licensee Event Reports. A risk-based analysis was performed on the data to estimate the observed unavailability of the RPS, based on a fault tree model of the system. Results were compared with existing unavailability estimates from Individual Plant Examinations and other reports.

None

The incorporation of vacancies, H atoms, and sp{sup 2} bond defects into single-crystal homoepitaxial (100)(2x1)- and(111)-oriented CVD diamond was simulated by atomic-scale kinetic Monte Carlo. Simulations were performed for substrate temperatures from 600 C to 1200 C with 0.4% CH{sub 4} in the feed gas, and for 0.4% to 7% CH{sub 4} feeds with a substrate temperature of 800 C. The concentrations of incorporated H atoms increase with increasing substrate temperature and feed gas composition, and sp{sup 2} bond trapping increases with increasing feed gas composition. Vacancy concentrations are low under all conditions. The ratio of growth rate to H atom concentration is highest around 800-900 C, and the growth rate to sp{sup 2} ratio is maximum around 1% CH{sub 4}, suggesting that these conditions are ideal for economical diamond growth under the simulated conditions.

Recycling of the spent rinse water discharged from the wet benches commonly used in semiconductor processing is one tactic for responding to the targets for water usage published in the 1997 National Technology Roadmap for Semiconductors (NTRS). Not only does the NTRS list a target that dramatically reduces total water usage/unit area of silicon manufactured by the industry in the future but for the years 2003 and beyond, the NTRS actually touts goals which would have semiconductor manufacturers drawing less water from a regional water supply per unit area of silicon manufactured than the quantity of ultrapure water (UPW) used in the production of that same silicon. Achieving this latter NTRS target strongly implies more widespread recycling of spent rinse waters at semiconductor manufacturing sites. In spite of the fact that, by most metrics, spent rinse waters are of much higher purity than incoming municipal waters, recycling of these spent rinse waters back into the UPW production plant is not a simple, straightforward task. The rub is that certain of the chemicals used in semiconductor manufacturing, and thus potentially present in trace concentrations (or more) in spent rinse waters, are not found in municipal water supplies and are not necessarily …

Ethane oxidation reactions were studied over pure and Ca-, Mg-, Sr-, La-, Nd-, and Y-substituted BaCeO{sub 3} perovskites under oxygen limited conditions. Several of the materials, notably the Ca- and Y-substituted materials, show activity for complete oxidation of the hydrocarbon to CO{sub 2} at temperatures below 650 C. At higher temperatures, the oxidative dehydrogenation (ODH) to ethylene becomes significant. Conversions and ethylene yields are enhanced by the perovskites above the thermal reaction in our system in some cases. The perovskite structure is not retained in the high temperature reaction environment. Rather, a mixture of carbonates and oxides is formed. Loss of the perovskite structure correlates with a loss of activity and selectivity to ethylene.

Current theories of CVD growth on (100) diamond are unable to account for the numerous experimental observations of slow-growing, locally smooth (100)(2x1) films. In this paper they use quantum mechanical calculations of diamond surface thermochemistry and atomic-scale kinetic Monte Carlo simulations of deposition to investigate the efficacy of preferential etching as a mechanism that can help to reconcile this discrepancy. This etching mechanism allows for the removal of undercoordinated carbon atoms from the diamond surface. In the absence of etching, simulated growth on the (100)(2x1) surface is faster than growth on the (110) and (111) surfaces, and the (100) surface is atomically rough. When etching is included in the simulations, the (100) growth rates decrease to values near those observed experimentally, while the rates of growth on the other surfaces remain largely unaffected and similar to those observed experimentally. In addition, the etching mechanism promotes the growth of smooth (100) surface regions in agreement with numerous scanning probe studies.

None

During the development and qualification of a radiation-hardened, 0.5 {micro}m shallow trench isolation technology, several yield-limiting defects were observed. The 256K (32K x 8) static-random access memories (SRAMs) used as a technology characterization vehicle had elevated power supply current during wafer probe testing. Many of the die sites were functional, but exhibited quiescent power supply current (I{sub DDQ}) in excess of 100 {micro}A, the present limit for this particular SRAM. Initial electrical analysis indicated that many of the die sites exhibited unstable I{sub DDQ} that fluctuated rapidly. We refer to this condition as ''jitter.'' The I{sub DDQ} jitter appeared to be independent of temperature and predominantly associated with the larger 256K SRAMs and not as prevalent in the 16K SRAMs (on the same reticle set). The root cause of failure was found to be two major processing problems: salicide bridging and stress-induced dislocations in the silicon islands.

We have been studying the use of spectral imagery to locate targets in spectrally interfering backgrounds. In making performance estimates for various sensors it has become evident that some calculations are unreliable because of overflying. Hence, we began a thorough study of the problem of overfitting in multivariate classification. In this paper we present some model based results describing the problem. From the model we know the ideal covariance matrix, the ideal discriminant vector, and the ideal classification performance. We then investigate how experimental conditions such as noise, number of bands, and number of samples cause discrepancies from the ideal results. We also suggest ways to discover and alleviate overfitting.

We developed a fiber coupled sensor to measure High Voltage directly using only light as the probe. We use the Pockles effect in lithium niobate crystal which will induce a phase shift in a laser beam that varies according to applied voltage. This can then be transformed into a modulation of beam intensity by polarizers, interferometery, or waveguide coupling. No voltage dividers are necessary, nor is any physical connection. This is accompanied by taking advantage of the structure of the power system itself, using voltage planes and dielectric insulation already present as the capacitive voltage divider. We hypothesize a bandwidth from GHz to DC. Such a system could be used in any application that calls for isolated and unobtrusive voltage sensing.

There is a growing interest in understanding the potential consequences of malevolent acts against shipments of nuclear waste and/or material. Recently, Sandia National Laboratories (SNL) conducted a study' to evaluate the potential source terms available for release in a sabotage event for spent fuel shipments. Using these source terms, we developed an approach to assess the potential radiological consequences of the hypothesized events and to compare them to consequences of transportation accidents involving the same types of shipments. Our analysis showed that there could be orders of magnitude differences in consequence for urban, suburban, and rural events. Sabotage consequences could be orders of magnitude higher than those of transportation accidents with a probability of 10{sup {minus}12} or higher and be similar to events with a probability less than 10{sup {minus}12}. Also, explosive-induced buoyancy would disperse the source further out than a non-buoyant release in a transportation accident, which, therefore, would have a higher dose near the release point.

The investigation of a complex system is often performed using computer generated response data supplemented by system and component test results where possible. Analysts rely on an efficient use of limited experimental resources to test the physical system, evaluate the models and to assure (to the extent possible) that the models accurately simulate the system order investigation. The general problem considered here is one where only a restricted number of system simulations (or physical tests) can be performed to provide additional data necessary to accomplish the project objectives. The levels of variables used for defining input scenarios, for setting system parameters and for initializing other experimental options must be selected in an efficient way. The use of computer algorithms to support experimental design in complex problems has been a topic of recent research in the areas of statistics and engineering. This paper describes a resampling based approach to form dating this design. An example is provided illustrating in two dimensions how the algorithm works and indicating its potential on larger problems. The results show that the proposed approach has characteristics desirable of an algorithmic approach on the simple examples. Further experimentation is needed to evaluate its performance on larger problems.