The 1.5 GeV compact light source UCS proposed for UCLA must fit into a shielded vault that is 9.144 meters (30 feet) wide. In order for the machine to fit into the allowable space, the ring circumference must be reduced 36 meters, the circumference of the six cell lattice, to something like 26 or 27 meters. The four cell lattice described in this report has a ring circumference of 27.0 meters.

This paper represents an attempt to express in print the contents of a rather philosophical review talk. The charge for the talk was not to summarize the present status of the field and what we can do, but to assess what we will need to do in the future and where the gaps are in fulfilling these needs. The objective was to be complete, covering all aspects of theory and modeling in all frequency regimes, although in the end the talk mainly focussed on the ion cyclotron range of frequencies (ICRF). In choosing which areas to develop, it is important to keep in mind who the customers for RF modeling are likely to be and what sorts of tasks they will need for RF to do. This occupies the first part of the paper. Then we examine each of the elements of a complete RF theory and try to identify the kinds of advances needed.

A scalable, parallel code system to perform neutral particle transport calculations in three dimensions is presented. To utilize the hyper-cluster architecture of emerging tera scale computers, the parallel code successfully combines the MPI message passing and paradigms. The code's capabilities are demonstrated by a shielding calculation containing over 14 billion unknowns. This calculation was accomplished on the IBM SP ''ASCI-Blue-Pacific computer located at Lawrence Livermore National Laboratory (LLNL).

The Department of Energy (DOE) has declared approximately 38.2 tonnes of weapons-grade plutonium to be excess to the needs of national security, 14.3 tonnes of fuel- and reactor-grade plutonium excess to DOE needs, and anticipates an additional 7 tonnes to be declared excess to national security needs. Of this 59.5 tonnes, DOE anticipates that {approximately} 7.5 tonnes will be dispositioned as spent fuel at the Geologic Repository and {approximately} 2 tonnes will be declared below the safeguards termination limit and be discard3ed as TRU waste at WIPP. The remaining 50 tonnes of excess plutonium exists in many forms and locations around the country, and is under the control of several DOE offices. In addition to the plutonium, the feed stock also contains about 17 tonnes of depleted uranium, about 600 kg of highly enriched uranium, and many kilograms of neptunium and thorium and about 8 to 10 tonnes of tramp impurities. The Materials Disposition Program (MD) will be received materials packaged by these other Programs to disposition in a manor that meets the spent fuel standard. To minimize the cost of characterization of the feedstock and to minimize purification processes, a blending strategy will be followed. The levelization of the …

None

Cracking of the stainless steel layer of co-extruded 304L stainless steel/SA210 Gd A 1 carbon steel black liquor recovery boiler floor tubes has been identified as one of the most serious material problems in the pulp and paper industry. A DOE-funded study was initiated in 1995 with the goal of determining the cause of and possible solutions to this cracking problem. These studies have characterized tube cracking as well as the chemical and thermal environment and stress state of floor tubes. Investigations of possible cracking mechanisms indicate that stress corrosion cracking rather than thermal fatigue is a more likely cause of crack initiation. The cracking mechanism appears to require the presence of hydrated sodium sulfide and is most likely active during shut-downs and/or start-ups. Based on these results and operating experience, certain alloys appear to be more resistant than others to cracking in the floor environment, and certain operating practices appear to significantly lessen the likelihood of cracking. This report is the latest in a series of progress reports presented on this project.

Sandia National Laboratories and the Russian Federal Nuclear Center-All Russian Research Institute for Experimental Physics (VNIIEF) (also known as Arzamas-16) are collaborating on ways to assure the highest standards of safety, security, and international accountability of fissile material. For these collaborations, sensors and information technologies have been identified as important in reaching these standards in a cost-effective manner. Specifically, Sandia and VNIIEF have established a series of remote monitoring field trials to provide a mechanism for joint research and development on storage monitoring systems. These efforts consist of the ''Container-to-Container'', ''Magazine-to-Magazine'', and ''Facility-to-Facility'' field trials. This paper will describe the evaluation exercise Sandia and VNIIEF conducted on the Magazine-to-Magazine systems. Topics covered will include a description of the evaluation philosophy, how the various sensors and system features were tested, evaluation results, and lessons learned.

Sandia National Laboratories is developing polyurethane foam as a chemical grout for lost circulation zones. In past work polyurethane foam was tried with limited success in laboratory tests and GDO sponsored field tests. Goals were that the foam expanded significantly and harden to a chillable firmness quickly. Since that earlier work there have been improvements in polyurethane chemistry and the causes of the failures of previous tests have been identified. Recent success in applying pure solution grouts (proper classification of polyurethane--Naudts) in boreholes encourages reevaluating its use to control lost circulation. These successes include conformance control in the oil patch (e.g. Ng) and darn remediation projects (Bruce et al.). In civil engineering, polyurethane is becoming the material of choice for sealing boreholes with large voids and high inflows, conditions associated with the worst lost circulation problems. Demonstration of a delivery mechanism is yet to be done in a geothermal borehole.

The precise pore sizes defined by crystalline zeolite lattices have led to intensive research on zeolite membranes. Unfortunately zeolites have proven to be extremely difficult to prepare in a defect-free thin film form needed for membrane flux and selectivity. We introduce tetrapropylammonium (TPA), a structure-directing agent for zeolite ZSM-5, into a silica sol and exploit the development of high solvation stresses to create templated amorphous silicas with pore apertures comparable in size to those of ZSM-5. Silicon and carbon NMR experiments were performed to evaluate the efficacy of our templating approach. The {sup 29}Si NMR spectrum of the silica matrix was observed by an intermolecular cross-polarization experiment involving the {sup 1}H nuclei of TPA and the {sup 29}Si nuclei in the silica matrix. The efficiency of the cross-polarization interaction was used to investigate the degree to which the matrix formed a tight cage surrounding the template molecule. Bulk xerogels, prepared by gelation and slow drying of the corresponding sols, exhibited only weak interactions between the two sets of nuclei. Thin film xerogels, where drying stresses are greater, exhibited significantly increased interactions. Intramolecular cross-polarization experiments between the {sup 1}H and {sup 13}C nuclei of the template molecule demonstrated that much of …

The authors have successfully synthesized highly crystalline, size-selected indirect band-gap nanocrystals (NC) of Si, Ge and MoS{sub 2} in the size range 2-10 nm in inverse micelles and studied their optical absorption and photoluminescence (PL) properties using liquid chromatography. Room temperature, visible PL from these nanocrystals was demonstrated in the range 700-350 nm (1.8-3.5 eV). their experimental results are interpreted in terms of the corresponding electronic structure of the bulk materials and it is demonstrated that these nanocrystals retain bulk-like electronic character to sizes as small as 2 nm, but the absorbance energies are strongly blue-shifted by quantum confinement. The experimental results on Si-NCs are also compared to earlier work on Si clusters grown by other techniques and to the predictions of various model calculations. Currently, the wide variations in the theoretical predictions of the various models along with considerable uncertainties in experimental size determination for clusters less than 3-4 nm, make it difficult to select the best model.

This study demonstrates the potential of polarization sensitive optical coherence tomography (PS-OCT) for non-invasive in vivo detection and characterization of early, incipient caries lesions. PS-OCT generates cross-sectional images of biological tissue while measuring the effect of the tissue on the polarization state of incident light. Clear discrimination between regions of normal and demineralized enamel is first shown in PS-OCT images of bovine enamel blocks containing well-characterized artificial lesions. High-resolution, cross-sectional images of extracted human teeth are then generated that clearly discriminate between the normal and carious regions on both the smooth and occlusal surfaces. Regions of the teeth that appeared to be demineralized in the PS-OCT images were verified using histological thin sections examined under polarized light microscopy. The PS-OCT system discriminates between normal and carious regions by measuring the polarization state of the back-scattered 1310 nm light, which is affected by the state of demineralization of the enamel. Demineralization of enamel increases the scattereing coefficient, thus depolarizing the incident light. This study shows that PS-OCT has great potential for the detection, characterization, and monitoring of incipient caries lesions.

We have been successful in adapting Fourier transform (FT) Raman accessories and spectrophotometers for sensitive measurements of the photoluminescence (PL) spectra of photovoltaic materials and devices. In many cases, the sensitivity of the FT technique allows rapid room-temperature measurements of weak luminescence spectra that cannot be observed using dispersive PL spectrophotometers. We present here the results of a number of studies of material and device quality obtained using FT-luminescence spectroscopy, including insights into bandgap variations, defect and impurity effects, and relative recombination rates. We also describe our approach to extending the range of the FT-Raman spectrophotometer to cover the region from 11,500 to 3700 cm-1, enabling FT-luminescence measurements to be made from 1.42 to 0.46 eV, and our investigation of FT-PL microspectroscopy.

In this paper, we summarize the rationale for an advanced system called Diagnostics-While-Drilling (DWD) and describe its benefits, preliminary configuration, and essential characteristics. The central concept is a closed data circuit in which downhole sensors collect information and send it to the surface via a high-speed data link, where it is combined with surface measurements and processed through drilling advisory software. The driller then uses this information to adjust the drilling process, sending control signals back downhole with real-time knowledge of their effects on performance. We outline a Program Plan for DOE, university, and industry to cooperate in the development of DWD technology.

The thermal oxidative aging of a crosslinked hydroxy-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) based polyurethane rubber, used as a polymeric binder in solid propellant grain, was investigated at temperatures from 25 C to 125 C. The changes in tensile elongation, polymer network properties and chain dynamics, mechanical hardening and density were determined with a range of techniques including modulus profiling, solvent swelling, NMR relaxation and O{sub 2} permeability measurements. We critically evaluated the Arrhenius methodology that is commonly used with a linear extrapolation of high temperature aging data using extensive data superposition and highly sensitive oxygen consumption experiments. The effects of other constituents in the propellant formulation on aging were also investigated. We conclude that crosslinking is the dominant process at higher temperatures and that the degradation involves only limited hardening in the bulk of the material. Significant curvature in the Arrhenius diagram of the oxidation rates was observed. This is similar to results for other rubber materials.

An ergonomics program including a ergonomic computer workstation evaluations at a research and development facility was assessed three years after formal implementation. As part of the assessment, 53 employees who had been subjects of computer workstation evaluations were interviewed. The documented reports (ergonomic evaluation forms) of the ergonomic evaluations were used in the process of selecting the interview subjects. The evaluation forms also provided information about the aspects of the computer workstation that were discussed and recommended as part of the evaluation, although the amount of detail and completeness of the forms varied. Although the results were mixed and reflective of the multivariate psychosocial factors affecting employees working in a large organization, the findings led to recommendations for improvements of the program.

The first flight test of the variable specific impulse magnetoplasma rocket (VASIMR) is tentatively scheduled for the Radiation and Technology Demonstration (RTD) in 2003. This mission to map the radiation environment out to several earth radii will employ both a Hall thruster and a VASIMR during its six months duration, beginning from low earth orbit. The mission will be powered by a solar array providing 12 kW of direct current electricity at 50 V. The VASIMR utilizes radiofrequency (RF) power both to generate a high-density plasma in a helicon source and to accelerate the plasma ions to high velocity by ion cyclotron resonance heating (ICRH). The VASIMR concept is being developed by the National Aeronautics and Space Administration (NASA) in collaboration with national laboratories and universities. Prototype plasma sources, RF amplifiers, and antennas are being developed in the experimental facilities of the Advanced Space Propulsion Laboratory (ASPL).

The simultaneous impact of multiple shaped-charge jets on a concrete target has been observed experimentally to lead to the formation of a larger and deeper entrance crater than would be expected from the superposition of the craters of the individual jets. The problem has been modeled with the 3-D simulation code ALE3D, running on massively parallel processors. These calculations indicate that the enlarged damage area is the result of tensile stresses caused by the interactions among the pressure waves simultaneously emanating from the three impact sites. This phenomenon has the potential for enhancing the penetration of a follow-on projectile.

The microscopic origin of compact triangular islands on close-packed surfaces is identified using kinetic Monte Carlo simulations with energy barriers obtained from density-functional calculations. In contrast to earlier accounts, corner diffusion anisotropy is found to control the shape of compact islands at intermediate temperatures. We rationalize the correlation between the orientation of dendrites grown at low temperatures and triangular islands grown at higher temperatures, and explain why in some systems dendrites grow fat before turning compact.

The authors estimate how thermomechanical processes affect the spatial variability of fracture permeability for a 3-D model representing Topopah Spring tuff at the nuclear-waste repository horizon in Yucca Mountain, Nevada. Using a finite-difference code, they compute thermal stress changes. They evaluate possible permeability enhancement resulting from shear slip along various mapped fracture sets after 50 years of heating, for rock in the near-field environment of the proposed repository. The results indicate permeability enhancement of a factor of 2 for regions about 10 to 30 m above drifts, for north-south striking vertical fractures. Shear slip and permeability increases of a factor of 4 can occur in regions just above drifts, for east-west striking vertical fractures. Information on how permeability may change over the lifetime of a geologic repository is important to the prediction and evaluation of repository performance.

Preliminary high power tests have been performed on a folded waveguide (FWG) ICRF launcher with a curved coupling faceplate installed. Two alternative faceplate configurations have been built and tested at low power and will be tested at high power in the near future. The new designs include a dipole plate which provides a 0-<font face="symbol">p</font> launch spectrum and a more transparent, flexible monopole face plate configuration. This FWG design is a 12 vane, 57 MHz design with a 0.31 m square cross section. The FWG can be installed with either fast wave or ion-Bernstein wave polarization and can also be retracted behind a vacuum isolation valve. A 1 x 4 FWG array optimized for fast wave current drive on DIII-D has been conceptualized.

The temperatures of floor tubes in a slope-floored black liquor recovery boiler were measured using an array of thermocouples located on the tube crowns. It was found that sudden, short duration temperature increases occurred with a frequency that increased with distance from the spout wall. To determine if the temperature pulses were associated with material falling from the convective section of the boiler, the pattern of sootblower operation was recorded and compared with the pattern of temperature pulses. During the period from September, 1998, through February, 1999, it was found that more than 2/3 of the temperature pulses occurred during the time when one of the fast eight sootblowers, which are directed at the back of the screen tubes and the leading edge of the first superheater bank, was operating.

Numerical studies, performed with the Monte-Carlo code FIDO [1], of the evolution of the resonant-ion distribution function in the presence of ICRH in toroidal geometry are presented. In particular it is pointed out how the absorption of toroidal momentum from a wave field with finite parallel wave numbers causes spatial drift and diffusion, which together with the finite orbit widths of the tail ions is shown to have a large effect on the temperature profile of the resonant ion species and also to cause losses of high-energy ions to the wall [2]. Furthermore, it is found that the finite orbit width and the inward drift occuring for negative parallel wave numbers [3] each give rise to a new mechanism of minority-ion cyclotron current drive as compared to earlier models where the drift orbits of the resonant ions are confined to the magnetic flux surfaces. For high levels of coupled power these new mechanisms are found to be the dominating ones [4,5].

We show that Sorensen's [35] implicitly restarted Arnoldi method (including its block extension) is simultaneous iteration with an implicit projection step to accelerate convergence to the invariant subspace of interest. By using the geometric convergence theory for simultaneous iteration due to Watkins and Elsner [43], we prove that an implicitly restarted Arnoldi method can achieve a super-linear rate of convergence to the dominant invariant subspace of a matrix. Moreover, we show how an IRAM computes a nested sequence of approximations for the partial Schur decomposition associated with the dominant invariant subspace of a matrix.

A flow-through high-pressure electrical conductance cell was designed and constructed to measure limiting molar conductances and ion association constants of dilute aqueous solutions with high precision at high temperatures and pressures. The basic concept of the cell employs the principle developed at the University of Delaware in 1995, but overall targets higher temperatures (to 600 C) and pressures (to 300 MPa). At present the cell has been tested by measuring aqueous NaCl and LiOH solutions (10{sup {minus}3} to 10{sup {minus}5} mol.kg{sup {minus}1}) to 405 C and 33 MPa with good results.