Article discussing research on the response of carbon nanotubes to a tensile load.

Article on lip-lip interactions and the growth of multiwalled carbon nanotubes.

Article on the mechanism of strain release in carbon nanotubes.

Article on SL₂-polynomial invariance. The purpose of this article is to describe completely, in a constructive way, the structure of these invariant polynomials in the particular case n = 2, for an arbitrary field k.

This study assesses the Principles of Technology Applied Science high school courses taught in Pennsylvania.

Article on enhancing assignment completion in academically diverse vocational classes.

Article broadly discussing some of the technological changes in vocational education over the last 25 years, as well as strategies for implementation and planning in the new millennium.

The skeletal structure of aerogel is determined before, during, and after the gel is formed. Supercritical drying of aerogel largely preserves the pore structure that is determined near the time of gelation. To better understand these gel formation mechanisms we carried out measurements of the time evolution of light scattering in a series of gels prepared without conventional acid or base catalysis. Instead, ultraviolet light was used to catalyze the formation of silica gels made from the hydrolysis of tetraethylorthosilicate and partly prehydrolyzed tetraethylorthosilicate in ethanol. Time evolution of light scattering provides information regarding the rate and geometrical nature of the assembly of the primary silica particles formed in the sol. UV-catalyzed gels show volumetric growth typical of acid-catalyzed gels, except when UV exposure is discontinued at the gel point, where gels then show linear chain formation typical of base-catalyzed gels. Long term UV exposure leads to coarsening of the pore network, a decrease in the clarity of the aerogel, and an increase in the surface area of the aerogel. Additionally, UV exposure up to the gel point leads to increased crystallinity in the final aerogel.

The PEP-II High Energy Ring (HER), a 9 GeV electron storage ring, has been in commissioning since spring 1997. Initial beam commissioning activities focused on systems checkout and commissioning and on determining the behavior of the machine systems at high beam currents. This phase culminated with the accumulation of 0.75 A of stored beam-sufficient to achieve design luminosity--in January 1998 after 3.5 months of beam time. Collisions with the 3 GeV positron beam of the Low Energy Ring (LER) were achieved in Summer of 1998. At high beam currents, collective instabilities have been seen. Since then, commissioning activities for the HER have shifted in focus towards characterization of the machine and a rigorous program to understand the machine and the beam dynamics is presently underway.

None

None

Radio-frequency (RF) driven ion sources are being developed in Lawrence Berkeley National Laboratory (LBNL) for sealed-accelerator-tube neutron generator applications. By using a 2.5-cm-diameter RF-driven multicusp source and a computer designed 100 keV accelerator column, peak extractable hydrogen current exceeding 1 A from a 3-mm-diameter aperture, together with H{sup +} yields over 94% have been achieved. These experimental findings together with recent moderator design will enable one to develop compact 14 MeV neutron generators based on the D-T fusion reaction. In this new neutron generator, the ion source, the accelerator and the target are all housed in a sealed metal container without pumping. With a 120 keV and 1 A deuteron beam, it is estimated that a treatment time of {approx} 45 minutes is needed for boron neutron capture therapy.

None

In a short review of recent work, we discuss the general problem of constructing the actions of new conformal field theories from old conformal field theories. Such a construction follows when the old conformal field theory admits new conformal stress tensors in its chiral algebra, and it turns out that the new conformal field theory is generically a new spin-two gauge theory. As an example we discuss the new spin-two gauged sigma models which arise in this fashion from the general conformal non-linear sigma model.

None

None

The 242-A Evaporator is the primary waste evaporator for the Hanford Site radioactive liquid waste stored in underground double-shell tanks. Low pressure evaporation is used to remove water from the waste, thus reducing the amount of tank space required for storage. The process produces a concentrated slurry, a process condensate, and an offgas. The offgas exhausts through two stages of high-efficiency particulate air (HEPA) filters before being discharged to the atmosphere 40 CFR 61 Subpart H requires assessment of the unfiltered exhaust to determine if continuous compliant sampling is required. Because potential (unfiltered) emissions are not measured, methods have been developed to estimate these emissions. One of the methods accepted by the Environmental Protection Agency is the measurement of the accumulation of radionuclides on the HEPA filters. Nondestructive assay (NDA) was selected for determining the accumulation on the HEPA filters. NDA was performed on the HEPA filters before and after a campaign in 1997. NDA results indicate that 2.1 E+4 becquerels of cesium-137 were accumulated on the primary HEPA 1700 filter during the campaign. The feed material processed in the campaign contained a total of 1.4 E+l6 Bq of cesium-137. The release factor for the evaporator process is 1.5 E-12. …

The US Department of Energy (DOE) has initiated remediation for stored high-level radioactive wastes. At the DOE Hanford site in southeastern Washington, 149 large underground tanks contain such wastes, generated by various chemical processes during the manufacture of plutonium for nuclear weapons. One of the key steps in this remediation effort is to characterize the waste stored in these tanks so that it can be treated properly and safely. A number of samples have been extracted from a subset of the tanks and analyzed for various chemical and radiological constituents. The analytical results were used to cluster tanks into groups with similar waste compositions. The tank groups determined by clustering of the analytical data are compared to tank groups determined using process-based historical models. Agreement between the two grouping strategies may reduce the number of samples required to characterize the waste in a tank, and perhaps support the use of the historical models to characterize tanks that have not been sampled. A successful implementation of this approach with one tank group is described here. This particular case yielded DOE significant savings of characterization resources.

This report contains vugraphs of presentations given at the meeting. The topics covered include the following: FFTF Deactivation Strategy; Sodium Drain and Disposition; Sodium Processing; and Fuel Storage and Disposition.

This paper presents several innovative and common sense approaches to pollution prevention that have been employed during facility deactivation at the Hanford Site in South Central Washington. It also presents several pollution prevention principles applicable to other projects. Innovative pollution prevention ideas employed at the Hanford site during facility deactivation included: (1) Recycling more than 185,000 gallons of radioactively contaminated nitric acid by sending it to an operating nuclear fuels reprocessing facility in England; (2) Recycling millions of pounds of chemicals and excess materials to other industries for reuse; (3) Evaporating flush water at a low rate and discharging it into the facility exhaust air stream to avoid discharging thousands of gallons of liquid to the soil column; and (4) Decontaminating and disposing of thousands of gallons of radioactively contaminated organic solvent waste to a RCRA licensed, power-producing, commercial incinerator. Common sense pollution prevention ideas that were employed include recycling office furniture, recycling paper from office files, and redeploying tools and miscellaneous process equipment. Additional pollution prevention occurred as the facility liquid and gaseous discharge streams were deactivated. From the facilities deactivation experiences at Hanford and the ensuing efforts to disposition excess chemicals and materials, several key pollution prevention principles …

Lockheed Martin Hanford Corporation is developing and implementing an integrated technical baseline for cleaning up environmental contamination at the Hanford Site in Washington State. The Hanford Site is located in Washington State and has been referred to as one of the largest Environmental Cleanup challenges in the US. It became contaminated with radioactive and dangerous wastes during the 40+ years it was being used to produce weapons grade plutonium in support of the US nuclear weapons program (See Figure 1). The US Department of Energy (US DOE) is responsible for cleanup of the Hanford Site with the Environmental Protection Agency (EPA) and the Washington State Department of Ecology (Ecology) both providing regulatory oversight. The US DOE, EPA and Ecology entered into an agreement in 1989 (Hanford Federal Facility Agreement and Consent Order, commonly referred to as the Tri-Party Agreement) that provides the framework for cleanup of the Hanford Site. However, since the inception of the Tri-Party Agreement, there have been numerous changes due to technical issues, funding issues, and priority changes within the cleanup mission. As a result, progress on the definition and execution of the cleanup work has been slower than anticipated and has resulted in some false starts, …

Waste processing and preparing waste to support waste processing relies heavily on ventilation. Ventilation is used at the Hanford Site on the waste storage tanks to provide confinement, cooling, and removal of flammable gases.

This paper summarizes an analysis of the U.S.-Russian Nuclear Material Protection, Control and Accounting (MPC&A) Program, developed on the basis of extensive discussions with U.S. laboratory participants as well as personal experience. Results of the discussions have been organized into three main areas: Technical/MPC&A Progress; Programmatic and Administrative Issues; and Professional Aspects, Implications for MPC&A effectiveness, for MPC&A sustainability, and for future relations and collaboration are derived. Suggested next steps are given.

The Ultra Compact Synchrotron (UCS), proposed for UCLA, is a compact 1.5 GeV electron light source with superconducting magnets to produce X rays with a critical energy of about 10 keV. The design physical length (cold length) for the dipole is 418 mm. The synchrotron requires that a uniform field be produced in a region that is 180 mm wide by 40 mm high by about 380 mm long. The end regions of the dipole should be short compared to the overall length of the dipole field region. A Vobly H type of dipole was selected for the synchrotron bending magnets. In order for each dipole to bend a 1.5 GeV electron beam 30 degrees, the central induction must be in the range of 6.4 to 6.9 T (depending on the dipole magnetic length). The pole width for the dipole was set so that over 90% of the X rays generated by the magnet can be extracted. The three dimensional field calculations were done using TOSCA. This report shows that a Vobly type of dipole will behave magnetically as a conventional water cooled iron dominated dipole. The uniformity of the integrated magnetic field can be controlled by varying the current …