In December 1992, the US Department of Energy (DOE) directed that the Plutonium-Uranium Extraction (PUREX) Plant be shut down and deactivated because it was no longer needed to support the nation`s production of weapons-grade plutonium. The PUREX/UO{sub 2} Deactivation Project will establish a safe and environmentally secure configuration for the facility and preserve that configuration for 10 years. The 10-year span is used to predict future maintenance requirements and represents the estimated time needed to define, authorize, and initiate the follow-on decontamination and decommissioning activities. Accomplishing the deactivation project involves many activities. Removing major hazards, such as excess chemicals, spent fuel, and residual plutonium are major goals of the project. The scope of the PUREX Transition Project is described within.

Using dimuons collected with the D{null} detector during the 1993- 1995 Tevatron collider run, we have measured the {ital b}-quark cross section and {ital b{anti b}} correlations as given by the difference in azimuthal angle between the two muons. Both measurements agree with the NLO QCD predictions within experimental and theoretical errors.

This CD-ROM contains the proceedings from the DOE Pollution Prevention in the 21st Century Conference XII held July 9-11, 1996. Topics included model facilities, federal and NEPA stakeholders, microchemistry, source 4 solvents and reduction, education and outreach planning, return on investment, energy management, decontamination and decommissioning, planning and regulations, environmental restoration, solid waste, recycling, affirmative procurement in the executive branch, construction and demolition, international and ISO 14000, and poster sessions.

Accelerators of sufficient energy and particle fluence can produce radioactivity as an unwanted byproduct. The radioactivity is typically imbedded in structural materials but may also be removable from surfaces. Many of these radionuclides decay by positron emission or electron capture; they often have long half lives and produce photons of low energy and yield making detection by standard devices difficult. The contamination control limit used throughout the US nuclear industry and the Department of Energy is 1,000 disintegrations per minute. This limit is based on the detection threshold of pancake type Geiger-Mueller probes for radionuclides of relatively high radiotoxicity, such as cobalt-60. Several radionuclides of concern at a high energy electron accelerator are compared in terms of radiotoxicity with radionuclides commonly found in the nuclear industry. Based on this comparison, a count-rate based contamination control limit and associated measurement strategy is proposed which provides adequate detection of contamination at accelerators without an increase in risk.

The paper discusses some of the assumptions and methods employed for the control of ionizing radiation in the specifications for the civil construction of a planned free electron laser facility based on a 200 MeV, 5 mA superconducting recirculation electron accelerator. Consideration is given firstly to the way in which the underlying building configuration and siting aspects were optimized on the basis of the early assumptions of beam loss and radiation goals. The various design requirements for radiation protection are then considered, and how they were folded into an aesthetically pleasing and functional building.

Paper 1: Using dimuons collected with the D0 detector during the 1993--1995 Tevatron collider run, the authors have measured the b-quark cross section and b[anti b] correlations as given by the difference in azimuthal angle between the two muons. Both measurements agree with the NLO QCD predictions within experimental and theoretical errors. (Three other papers are included in this report.)

Postlactational involution of the mammary gland is characterized by two distinct physiological events: apoptosis of the secretory, epithelial cells undergoing programmed cell death, and proteolytic degradation of the mammary gland basement membrane. We examined the spatial and temporal patterns of apoptotic cells in relation to those of proteinases during involution of the BALB/c mouse mammary gland. Apoptosis was almost absent during lactation but became evident at day 2 of involution, when {beta}-casein gene expression was still high. Apoptotic cells were then seen at least up to day 8 of involution, when {beta}-casein gene expression was being extinguished. Expression of sulfated glycoprotein-2 (SGP-2), interleukin-1{beta} converting enzyme (ICE) and tissue inhibitor of metalloproteinases-1 was upregulated at day 2, when apoptotic cells were seen initially. Expression of the matrix metalloproteinases gelatinase A and stromelysin-1 and the serine proteinase urokinase-type plasminogen activator, which was low during lactation, was strongly upregulated in parallel starting at day 4 after weaning, coinciding with start of the collapse of the lobulo-alveolar structures and the intensive tissue remodeling in involution. The major sites of mRNA synthesis for these proteinases were fibroblast-like cells in the periductal stroma and stromal cells surrounding the collapsed alveoli, suggesting that the degradative phase of …

We extend the QCD sum rule analysis of the form factor F(sub)(gamma*gamma* -> pi^0)(q(sub)1^2, q(sub)2^2) into the region of small virtuality of one of the photons:

A generalized Wakimoto realization of $\widehat\cal G_K$ can be associated with each parabolic subalgebra $\cal P=(\cal G_0 +\cal G_+)$ of a simple Lie algebra $\cal G$ according to an earlier proposal by Feigin and Frenkel. In this paper the proposal is made explicit by developing the construction of Wakimoto realizations from a simple but unconventional viewpoint. An explicit formula is derived for the Wakimoto current first at the Poisson bracket level by Hamiltonian symmetry reduction of the WZNW model. The quantization is then performed by normal ordering the classical formula and determining the required quantum correction for it to generate $\widehat\cal G_K$ by means of commutators. The affine-Sugawara stress-energy tensor is verified to have the expected quadratic form in the constituents, which are symplectic bosons belonging to $\cal G_+$ and a current belonging to $\cal G_0$. The quantization requires a choice of special polynomial coordinates on the big cell of the flag manifold $P\backslash G$. The effect of this choice is investigated in detail by constructing quantum coordinate transformations. Finally, the explicit form of the screening charges for each generalized Wakimoto realization is determined, and some applications are briefly discussed.

We demonstrate that there are regions of parameter space in the next-to-minimal (i.e. two-Higgs-doublet, one-Higgs-singlet superfield) supersymmetric extension of the SM for which none of the Higgs bosons are observable either at LEP2 with $\sqrt{s}=192 GeV$ and an integrated luminosity of $L=1000inverse pb$ or at the LHC with $L=600 inverse fb$.

The Virasoro master equation (VME) describes the general affine-Virasoro construction $T=L^abJ_aJ_b+iD^a \dif J_a$ in the operator algebra of the WZW model, where $L^ab$ is the inverse inertia tensor and $D^a $ is the improvement vector. In this paper, we generalize this construction to find the general (one-loop) Virasoro construction in the operator algebra of the general non-linear sigma model. The result is a unified Einstein-Virasoro master equation which couples the spacetime spin-two field $L^ab$ to the background fields of the sigma model. For a particular solution $L_G^ab$, the unified system reduces to the canonical stress tensors and conventional Einstein equations of the sigma model, and the system reduces to the general affine-Virasoro construction and the VME when the sigma model is taken to be the WZW action. More generally, the unified system describes a space of conformal field theories which is presumably much larger than the sum of the general affine-Virasoro construction and the sigma model with its canonical stress tensors. We also discuss a number of algebraic and geometrical properties of the system, including its relation to an unsolved problem in the theory of $G$-structures on manifolds with torsion.

We associate to outer automorphisms of generalized Kac-Moody algebras generalized character-valued indices, the twining characters. A character formula for twining characters is derived which shows that they coincide with the ordinary characters of some other generalized Kac-Moody algebra, the so-called orbit Lie algebra. Some applications to problems in conformal field theory, algebraic geometry and the theory of sporadic simple groups are sketched.

We consider unusual events in the CDF and D0 dilepton+jets sample with very high ET(lepton) and ET(missing). It is possible, but very unlikely, that these events originate from top quark pair production; however, they have characteristics that are better accounted for by decays of supersymmetric quarks with mass in the region of 300 GeV.

We briefly review the covariant formulation of the Green-Schwarz superstring by Berkovits, and describe how a detailed tree-level and one-loop analysis of this model leads, for the first time, to a derivation of the low-energy effective action of the heterotic superstring while keeping target-space supersymmetry manifest. The resulting low-energy theory is old-minimal supergravity coupled to tensor multiplet. The dilaton is part of the compensator multiplet.

I first emphasize the importance of searching for nucleon decay in the context of supersymmetric models. The status of minimal SUSY SU(5) model is reviewed, which can be definitively ruled out by a combination of superKamiokande andLEP-2 experiments. Non-minimal models may provide some suppression in the nucleon decay rates, but there is still a good chance for superKamiokande. I point out that the operators suppressed even by the Planck-scale are too large. We need a suppression mechanism for the operators at the level of 10-7, and the mechanism, I argue, may well be a flavor symmetry. A particular example predicts p --> K0e+ to be the dominant mode which does not arise in GUT models.

None

We describe the design and construction status of theLow-Energy Ring (LER) of the PEP-II project, a collaboration of SLAC,LBNL, and LLNL. In the past year we have optimized LER parameters andstarted component fabrication. By reusing the original wigglers, we wereable to simplify the design of the distributed wiggler photon dump, whichmust dissipate 260 kW of power. The number of RF stations (eachcomprising a klystron powering two 476-MHz cavities) was reduced from 4to 3. We have begun fabrication of the arc vacuum system based on anextruded Al antechamber configuration with discrete photon stops andTSPs. The design of the straight section vacuum components, to befabricated from stainless steel pipe, is also completed. Quadrupoles anddipoles are provided under a collaborative agreement with IHEP (Beijing);correctors and skew quadrupoles are built domestically and sextupoles arerefurbished from existing PEP magnets. LER commissioning will begin earlyin 1998.

Active sub-slab depressurization (SSD) systems are an effective means of reducing indoor radon concentrations in residential buildings. However, energy is required to operate the system fan and to heat or cool the resulting increased building ventilation. We present regional and national estimates of the energy requirements, operating expenses, and CO{sub 2} emissions associated with using SSD systems at saturation (i.e., in all U.S. homes with radon concentrations above the EPA remediation guideline and either basement or slab-on-grade construction). The primary source of uncertainty in these estimates is the impact of the SSD system on house ventilation rate. Overall, individual SSD system operating expenses are highest in the Northeast and Midwest at about $99 y{sup -1}, and lowest in the South and West at about $66 y{sup -1}. The fan consumes, on average, about 40% of the end-use energy used to operate the SSD system and accounts for about 60% of the annual expense. At saturation, regional impacts are largest in the Midwest because this area has a large number of mitigable houses and a relatively high heating load. We estimate that operating SSD systems in U.S. houses where it is both appropriate and possible (about 2.6 million houses), will annually …

Wind induces a ground-surface pressure field around a building that can substantially affect the flow of soil gas and thereby the entry of radon and other soil-gas contaminants into the building. To quantify the effect of the wind-induced groundsurface pressure field on contaminant entry rates, the mean ground-surface pressure field was experimentally measured in a wind tunnel for several incidence angles of the wind, two atmospheric boundary layers, and two house geometries. The experimentally measured ground-surface pressure fields are compared with those predicted by a k-e turbulence model. Despite the fundamental limitations in applying a k-e model to a system with flow separation, predictions from the numerical simulations were good for the two wind incidence angles tested.

The various power systems for supplying the PEP-II DCmagnets rely exclusively on switch mode conversion, utilizing a varietyof means depending on the requirements. All of the larger power supplies,ranging from 10 to 200 kW, are powered from DC sources utilizingrectified 480 V AC. Choppers can be used for the series connectedstrings, but for smaller groups and individual magnets, inverters drivinghigh-frequency transformers with secondary rectifiers comprise the bestapproach. All of the various systems use a "building block" approach ofmultiple standard-size units connected in series or parallel to mostcost-effectively deal with a great range of voltage and currentrequirements. Utilization of existing infrastructure from PEP-I has beena cost-effective determinant. Equipment is being purchased eitheroff-the-shelf, through performance specification, or by hardware purchasebased on design-through-prototype. The corrector magnet power system,utilizing inexpensive, off-the-shelf four-quadrant switching motorcontrollers, has already proven very reliable: 120 of the total of 900units have been running on the injection system for four months with nofailures.

None

This report talks about Application of Moments Method to Dynamics of Muon Cooling System

Thermal-sprayed zinc anodes are being used in Oregon in impressed current cathodic protection (ICCP) systems for reinforced concrete bridges. The U.S. Department of Energy, Albany Research Center, is collaborating with the Oregon Department of Transportation (ODOT) to evaluate the long-term performance and service life of these anodes. Laboratory studies were conducted on concrete slabs coated with 0.5 mm (20 mil) thick, thermal-sprayed zinc anodes. The slabs were electrochemically aged at an accelerated rate using an anode current density of 0.032 A/m2 (3mA/ft2). Half the slabs were preheated before thermal-spraying with zinc; the other half were unheated. Electrochemical aging resulted in the formation at the zinc-concrete interface of a thin, low pH zone (relative to cement paste) consisting primarily of ZnO and Zn(OH)2, and in a second zone of calcium and zinc aluminates and silicates formed by secondary mineralization. Both zones contained elevated concentrations of sulfate and chloride ions. The original bond strength of the zinc coating decreased due to the loss of mechanical bond to the concrete with the initial passage of electrical charge (aging). Additional charge led to an increase in bond strength to a maximum as the result of secondary mineralization of zinc dissolution products with the cement …

The experimental study of the water-rock interaction shows that the secondary mineral assemblage depends on the water composition. For example, granite-pure water interaction produces zeolites (relatively low-dense, Mg-poor minerals), whereas seawater yields chlorites (high-dense, Mg-rich minerals). The reactions have volumetric effects from several % to 20 % in magnitude. Volume deformations in the heterogeneous matrix cause uneven mechanical strains. Reactions with the effect of about 0,1 vol.% may cause strains of the order of 100-1000 bars being enough for destruction of rocks. Signs and magnitudes of local volume changes depend on the mineral composition of the secondary assemblage. Hence, one can provide either healing or cracking of primary fractures, as desired, by changing the composition of water in the water-felsic rock system where some elements (Mg, Fe) are in lack. The techniques of "chemical hydrofracturing" looks promising as applied to a granite HDR massif. One can regulate the permeability of fractured flow paths by changing in concord the composition and pressure of the injected water. This approach should promote efficient extraction of the petrothermal energy.