To demonstrate the feasibility of superconducting RF technology for a high energy e{sup +}/e{sup {minus}} collider, a research and development program has begun with collaborators from Europe, Asia, and North America. The immediate goal of the R&D program is to build and operate a 50 meter-long linac at DESY with 1.3 GHz superconducting RF cavities at a temperature of 1.8 K - 2.0 K and an accelerating gradient of 15 MV/meter. The refrigeration for the test system at DESY initially will have a capacity of about 100 W at 1.8 K, distributed among three test cryostats. In a second step, refrigeration will be upgraded to 200 W at 1.8 K in order to supply the 50 meter test linac. This paper describes the cryogenics of this test system.

We have installed a 48-channel platinum-foil bolometer system on DIII-D achieve better spatial and temporal resolution of the radiated power in diverted discharges. Two 24-channel arrays provide complete plasma coverage with optimized views of the divertor. We have measured the divertor radiation profile for a series of radiative divertor and power balance experiments. We observe a rapid change in the magnitude and distribution of divertor radiation with heavy gas puffing. Unfolding the radiation profile with only two views requires us to treat the core and divertor radiation separately. The core radiation is fitted to a function of magnetic flux and is then subtracted from the divertor viewing chords. The divertor profile is then fit to a 2-D spline as a function of magnetic flux and poloidal angle.

We describe 3-D research transport codes which have been developed at Los Alamos National Laboratory over the last three years. Some simple example calculations are presented.

As a result of the DOE Oak Ridge Reservation (DOE-ORR) placement on the EPA Superfund National Priorities List in December of 1989, all remedial activities, including characterization, remedial alternatives selection, and implementation of remedial measures, must meet the combined requirements of RCRA, CERCLA, and NEPA. The Environmental Restoration Program, therefore, was established with the mission of eliminating or reducing to prescribed safe levels the risks to the environment or to human health and safety posed by inactive and surplus DOE-ORR managed sites and facilities that have been contaminated by radioactive and surplus DOE-ORR managed sites and facilities that have been contaminated by radioactive, hazardous, or mixed wastes. In accordance with an established Federal Facilities Agreement (FFA), waste sites and facilities across the DOE-ORR have been inventoried, prioritized, and are being systematically investigated and remediated under the direction of Environmental Restoration. EarthVision, a product of Dynamic Graphics, Inc., that provides three-dimensional (3-D) modeling and visualization, was exercised within the framework of an environmental restoration (ER) decision support system. The goal of the prototype was to investigate framework integration issues including compatibility and value to decision making. This paper describes the ER program, study site, and information system framework; selected EarthVision results …

We have developed a 3-D time-dependent multigroup SP{sub n} method for unstructured tetrahedral meshes. The SP{sub n} equations are expressed in a canonical form which allows them to be solved using standard diffusion solution techniques in conjunction with source iteration, diffusion-synthetic acceleration, and fission-source acceleration. A computational comparison of our SP{sub n} method with an even-parity S{sub n} method is given.

The DIII-D program has just completed a major addition to its ion cyclotron range of frequency (ICRF) systems. This upgrade project added two new fast wave current drive (FWCD) systems, with each system consisting of a 2 MW, 30 to 120 MHz transmitter, ceramic insulated transmission lines and tuner elements, and water-cooled four-strap antenna. With this addition of 4 MW of FWCD power to the original 2 MW, 30 to 60 MHz capability, experiments can be performed that will explore advanced tokamak plasma configurations by using the centrally localized current drive to effect current profile modifications.

The primary goals of the conference were to: (1) Develop a peer/mentor network within the African-American physics community; (2) Inform African-American students in physics of the various academic and professional opportunities; and (3) Bring important academic, economic and political issues and developments in the field to the attention of the students. The conference program was designed to fulfill these goals and optimize the students` exposure to physics as a professional and its real-life applications in both industry and academia.

A model has been constructed of an 8-m-long high energy (7 MeV) Radio-Frequency Quadrupole (RFQ) to prove the concept of a resonantly coupled RFQ. The model consists of four 2-in-long RFQ segments resonantly coupled together. A small gap (3 mm) between the vane tips, at the segment joints, provides capacitive coupling. This model is of a RFQ designed for a proposed Los Alamos Accelerator Performance Demonstration Facility (APDF). The RFQ, as designed, will operate cw at 350 kHz and accelerate a 100-mA beam of protons to 7 MeV.

EG&G/EM has developed an oscilloscope with a {minus}3 dB bandwidth greater than 10 GHz. Its rolloff characteristics are such that single-transient data greater than 20 GHz may be captured. A demountable CCD camera records the oscilloscope trace and is provided with PC-compatible capture and data processing software. The capabilities of the oscilloscope, camera, and its processing software are described and examples of the system`s performance is shown.

A Schwarzschild imaging system has been designed to achieve 0.1 {mu}m resolution in a 0.4 mm diameter field of view when operated at a center wavelength of 13.4 nm. A decentered aperture is located on the convex primary resulting in an unobstructed numerical aperture of 0.08 and a corresponding depth of field of {plus_minus} 1 {mu}m. The Schwarzschild imaging objective is part of a five-reflection system containing the laser plasma source (LPS), condensing optics, turning mirror and reflection mask as shown in Figure 1. Extreme ultraviolet (EUV) radiation is generated by impinging a laser beam onto a copper target. The plasma source is driven by a Lambda Physik PLX 250 KrF excimer laser emitting 0.6 Joule, 20 ns pulses at a 200 Hz maximum repetition rate. Measurements of the source indicate that the full-width-half-maximum diameter is less than 100 {mu}m.

The authors present the series for the free energy and their estimate for the critical exponent {alpha}, as computed by a recursive bookkeeping algorithm on the CM5. They begin with a discussion of the algorithm to compute the High-Temperature expansion on finite 3-D Ising lattices.

We have developed a fast, sensitive neutron detector for recording the fusion reaction-rate history of inertial-confinement fusion (ICF) experiments. The detector is based on the fast rise-time of a commercial plastic scintillator (BC-422) and has a response < 25 ps FWHM. A thin piece of scintillator material acts as a neutron-to-light converter. A zoom lens images scintillator light to a high-speed (15 ps) optical streak camera for recording. A retractable nose cone positions the scintillator between 1 and 50 cm from a target. A simultaneously recorded optical fiducial pulse allows the streak camera time base to be calibrated relative to the incident laser power. Burn histories have been measured for deuterium-tritium filled targets with yields ranging between 10{sup 8} and 2 {times} 10{sup 13} neutrons.

SLAC has undertaken a modes programs to upgrade the beam energy for fixed target experiments to 50 GeV. This upgrade is possible due to the previous extensive development work on the linac accelerating gradient for the SLC, which has been operational for over five years. The SLC can deliver a beam of energy up to 60 GeV using a pulse compression technique in the rf system which trades pulse length for a higher pulse amplitude. This mode of operation has been reliable and routine for the SLC. However the beam line transport which takes electrons or positrons from the end of the linac to the target in End Station A has not been upgraded from the original design energy of 25 GeV. The 50 GeV upgrade for the fixed target experiments consists in modifying and increasing the number of beam line dipole magnets to reach 50 GeV, plus modernization of the beam line instrumentation and controls. The plans for spin structure experiments using electron beams at energies up to 50 GeV are described.

The first in a new series of high-power pulsed klystrons has been tested with the following results: Frequency = 11.4 GHz, beam voltage = 415 kV, power output = 51 MW, pulse length = 1.5 {mu}s, and efficiency = 37%. Several tubes of this type will be used in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The rf performance of the klystron, which employs a standing-wave extended-interaction output circuit, is closely approximated by simulations performed with the SLAC CONDOR code. The same code predicts considerably higher efficiency, using a traveling-wave output circuit. A klystron with such a circuit will be constructed in the future. Another klystron is also planned in which beam confinement is accomplished by a periodic permanent magnet (PPM) stack, for which simulations also predict good performance.

Investigation of the mechanistic aspects of cancer has its roots in the studies on tumor viruses and their effects on cell proliferation, function, and growth. This outstanding progress was well documented in previous Cold Spring Harbor Symposia on Quantitative Biology. In the early to mid 1980s, progress on the development of chromosome mapping strategies and the accumulation of DNA probes that identified polymorphisms, encouraged by the international Human Genome Project, enabled the identification of other genes that contributed to familial inheritance of high susceptibility to specific cancers. This approach was very successful and led to a degree of optimism that one aspect of cancer, the multistep genetic process from early neoplasia to metastatic tumors, was beginning to be understood. It therefore seemed appropriate that the 59th Symposium on Quantitative Biology focus attention on the Molecular Genetics of Cancer. The concept was to combine the exciting progress on the identification of new genetic alterations in human tumor cells with studies on the function of the cancer gene products and how they go awry in tumor cells.

We have generated approximately 100 watts of frequency doubled light from the output of an electro-optically Q-switched, diode-pumped Nd:YAG slab laser oscillator operating at an average power of 200 watts (2.5 kHz repetition rate, 80 mJ/pulse, 25 ns pulsewidth). The Q-switch was a compensated z-axis propagation LiNbO{sub 3} electro-optic modulator, and the frequency conversion crystal was a thin slab of KTP. In addition, Q-switched operation at an average power of approximately 250 watts with 26 ns pulsewidths has been demonstrated.

A new 250 GHz, two-frequency microwave interferometer system has been developed to diagnose divertor plasmas on DIII-D. This diagnostic will measure the line-averaged density across both the inner and outer, lower divertor legs. With a cut-off density of over 7 {times} 10{sup 14} cm{sup {minus}3}, temporal measurements of ELMs, MARFs and plasma detachment are expected. The outer leg system will use a double pass method while the inner leg system will be single pass. Two special 3D carbon composite tiles are used, one to protect the microwave antennas mounted directly under the strike point and the other as the outer leg reflecting surface. Performance, design constraints, and the thermalmechanical design of the 3D carbon composite tiles are discussed.

We describe an electro-optically Q-switched, diode-pumped ND:YAG slab laser oscillator operating at an average power of greater than 250 watts. More than 100 watts of frequency doubled light has been demonstrated.

The 308 Building located on the Hanford Site near Richland, Washington, is currently in transition to shutdown status. After this transition is complete, the facility will be maintained/surveilled and given to the U.S. Department of Energy Office of Facility Transition and Management (EM-60) for utilization, remedial action, or decontamination and decommissioning (D&D). This may require that the facility be maintained in the shutdown status for as long as 30 yrs. To date, all of the special nuclear material (SNM) has been removed, potential fuel supply equipment preserved, surplus materials and equipment excessed, and enclosure cleanup and stabilization completed. A major activity in support of the 308 Building shutdown was the cleanup and stabilization of the enclosures and surface contamination areas. This document discusses the specific designs, processes, and methods used to stabilize and confine the radiological material within the enclosure and exhaust ducts to allow the shutdown of the active support systems. The process and designs employed were effective, yet simple, and maximized the use of current technologies and commercial products.

This paper describes the experimental development of a long pulse, high current, annular beam relativistic klystron amplifier. The desired performance parameters are 1 GW output power and 1 {mu}s pulse length with an operating frequency of 1.3 GHz. The electron beam voltage and current are nominally 600 kV and 5 kA. Peak powers approaching 500 MW have been achieved in pulses of 1 {mu}s nominal baseline-to-baseline duration. The half power pulse width is 0.5 {mu}s. These pulses contain an energy of about 160 J. The design of this class of tube presents some unique challenges, particularly in the output cavity. The output cavity must exhibit a very low gap shunt impedance in order to obtain reasonable conversion efficiency from the low impedance modulated electron beam to microwave power, while still maintaining a reasonable loaded Q for mode purity. The physics of this device is dominated by space charge effects which strongly impact the design. Current experimental results and theoretical design considerations for this class of tube, and scaling to higher frequency operation, suitable for the Next Linear Collider are discussed.

In this paper, the authors report on a diode-side-pumped Er:YAG laser that generates over 500 mW of average power at 2.94 {mu}m, and tunes over a 6 nm range centered about the 2.94-{mu}m transition. Prior to the development of the laser, diode-pumped Er:YAG lasers have been end-pumped monolithic devices that deliver {approximately}200 mW of output at 2.94 {mu}m. Much of the difficulty in obtaining higher average power from Er:YAG stems from the unfavorable lifetimes of the upper and lower laser levels, the complex state dynamics, and a low stimulated emission cross section ({sigma} {approx} 3 {times} 10{sup {minus}20} cm{sup 2}). One of the most important dynamical processes in Er:YAG is cross relaxation between neighboring Er{sup 3+} ions in the {sup 4}I{sub 13/2} level. By recycling much of the {sup 4}I{sub 13/2} population (lower laser level) into {sup 4}I{sub 11/2} (upper laser level), the cross relaxation overcomes the unfavorable lifetimes of the two levels, allowing the population inversion to be sustained. It is this cross relaxation along with thermalization of the two laser levels that allows cw oscillation on the 2.94 {mu}m line to take place. The laser that they describe here is a quasi-cw device as the approach to obtaining …

These proceedings are of the 14th Annual International Meeting of Test Stations. As the original charter states these meetings are intended to be an international forum for sharing wind turbine testing experiences. By sharing their experiences they can improve testing skills and techniques. As with all new industries the quality of the products is marked by how well they learn from their experiences and incorporate this learning into the next generation of products. The test station`s role in this process is to provide accurate information to the companies they serve. This information is used by designers to conform and improve their designs. It is also used by certification agencies for confirming the quality of these designs. By sharing of experiences they are able to accomplished these goals, serve these customers better and ultimately improve the international wind energy industry.

Various topic on computer security are presented. Integrity standards, smartcard systems, network firewalls, encryption systems, cryptography, computer security programs, multilevel security guards, electronic mail privacy, the central intelligence agency, internet security, and high-speed ATM networking are typical examples of discussed topics. Individual papers are indexed separately.

An overview is presented of the National Aeronautics and Space Administration (NASA) Lewis Research Center free-piston Stirling engine activities directed toward space-power application. Free-piston Stirling technology is applicable for both solar and nuclear powered systems. As such, NASA Lewis serves as the project office to manage the newly initiated NASA SP-100 Advanced Technology Program. This 5-yr program provides the technology thrust for providing significant component and subsystem options for increased efficiency, reliability and survivability, and power output growth at reduced specific mass. One of the major elements of the program is the development of advanced power conversion concepts of which the Stirling cycle is a viable growth candidate. Under this program the status of the 25 kWe opposed-piston Space Power Demonstrator Engine (SPDE) is presented. Included in the SPDE discussion are comparisons between predicted and experimental engine performance, enhanced performance resulting from regenerator modification, increased operating stroke brought about by isolating the gas bearing flow between the displacer and power piston, identifying excessive energy losses and recommending corrective action, and a better understanding of linear alternator design and operation. Technology work is also conducted on heat exchanger concepts, both design and fabrication, to minimize the number of joints as well …