Leaves show a variety of strategies for maximizing CO{sub 2} and light capture. These are more meaningfully explained if they are considered in the context of maximizing capture relative to the utilization of water, nutrients and carbohydrates reserves. There is considerable variation between crops in their efficiency of CO{sub 2} and light capture at the leaf level. Understanding of these mechanisms indicate some ways in which efficiency of resource capture could be level cannot be meaningfully considered without simultaneous understanding of implications at the canopy level. 36 refs., 5 figs., 1 tab.

A method is described for obtaining monodomain PbTiO{sub 3} single crystals with high electrical resistivity (10{sup 10}{Omega} cm) and low dielectric frequency dispersion. The single crystals of PbTiO{sub 3} were grown by flux solution method. Space charge related defects, which result in the large dielectric frequency dispersion, were eliminated by heat treatments. 90{degrees} domains were removed by applying a unidirectional compressive stress along the <100> crystallographic direction. The monodomain single crystals of PbTiO{sub 3} were identified by cross polarized light optical microscopy and by X-ray diffraction (rocking curve). The anisotropic dielectric constants of these high quality single crystals were measured as a function of temperature. The results differ from the data reported previously in the literature.

An understanding of the chemical composition of such slags under boiler operating conditions and as function of the mineral composition of various coals is the ultimate goal of this program. The experiment involves scanning through the K- or L-shell absorption edge of the element in question. The structure of the absorption edge, consisting of transitions to unoccupied molecular levels, can be compared to those of model compounds for identification. The relative position of the absorption edge can yield information regarding the oxidation state of the element. This portion is the X-ray Absorption Near Edge Structure (XANES) portion of the spectrum. The Extended X-ray Absorption Fine Structure (EXFAS) region, extending from about 60 eV above the absorption edge, represents scattering from neighboring constituents and can be used to determine the coordination number of coordination distance of a specific element from its neighboring atoms. The best source of excitation energy for these experiments is an electron storage ring emitting synchrotron radiation (SR). The National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory is a 2.5 GeV storage ring and emits a continuous spectrum of x rays to an energy of about 30 keV. Beam line X-19A is dedicated to XANES and EXAFS …

The Fermilab Tevatron Muon Experiment has analyzed the hadron showers of events resulting from the scattering of a muon beam (< E{sub {mu}} > = 490 GeV) off H{sub 2}, D{sub 2} and Xenon targets. The topics which will be discussed are: (1) space-time evolution of the hadronization process; (2) leading hadron distributions in the shadowing region; (3) rates and characteristics of 3-jet events. 23 refs.

This paper discusses issues and approaches dealing with conceptualizing, implementing, and maintaining configuration control commensurate with the conduct of operations approach defined by DOE ORDER 5480.19. Specific topics reviewed will include key elements of assessments to determine the status quo such as assessment criteria, assessment personnel, and assessment scope; administrative programs to maintain the status quo such as organizational definition, responsibilities, interfaces, and priorities; oversight to determine control effectiveness via compliance and performance assessment.

Interest in the mechanisms of interaction and the biological effects of static magnetic fields has increased significantly during the past two decades as a result of the growing number of applications of these fields in research, industry and medicine. A major stimulus for research on the bioeffects of static magnetic fields has been the effort to develop new technologies for energy production and storage that utilize intense magnetic fields (e.g., thermonuclear fusion reactors and superconducting magnet energy storage devices). Interest in the possible biological interactions and health effects of static magnetic fields has also been increased as a result of recent developments in magnetic levitation as a mode of public transportation. In addition, the rapid emergence of magnetic resonance imaging as a new clinical diagnostic procedure has, in recent years, provided a strong rationale for defining the possible biological effects of magnetic fields with high flux densities. In this review, the principal interaction mechanisms of static magnetic fields will be described, and a summary will be given of the present state of knowledge of the biological, environmental, and human health effects of these fields.

Triplets composed of superconducting quadrupoles have been built and installed as the final focusing element for the high-energy positron and electron beams of the SLAC Linear Collider. Special features include independent alignment to 100-micron tolerance inside a common cryostat; non-magnetic materials to allow operation inside the detector's solenoid field; a continuous-flow helium-only system using 50-meter-long flexible transfer lines; and complete operation of the system before installation. The mechanical design and cryogenic operation experience are presented.

In Karkow, Poland almost half of the energy used for heating is supplied by local, solid-fuel-fired boilerhouses and home stoves. These facilities are referred to as the low emission sources'' and are primary contributors of particulates and hydrocarbon air pollution in the city and secondary contributors of sulfur dioxide and carbon monoxide. The Support of Eastern European Democracy Act of 1989 directed the US Department of Energy to undertake an equipment assessment project aimed at developing the capability within Poland to manufacture or modify industrial-scale combustion equipment to utilize fossil fuels cleanly. The Project is being conducted in a manner that can be generalized to all of Poland and uito the rest of Eastern Europe. The project plan includes three phases which have been developed around five specific subprojects. In Phase 1, technical and economic assessments will be made of pollution reduction options for the five subprojects. Phase 2 plans call for public meetings in the US and Poland for companies interested in forming joint ventures. Information will be available in these meetings to enable companies to identify markets and select potential partners that meet with their capabilities and interests. In Phase 3, DOE will issue a solicitation for Polish/American …

VISAR (Velocity Interferometer System for Any Reflector) is commonly used for measuring flyer-plate velocities up to 6 km/s. Flyer plates can travel as much as 1 mm, which is large compared to usual depth-of-focus requirements for VISARs. Flyer plates are explosively driven, or driven by some other very energetic means; as such, they must be tested in a chamber, which will contain the explosion. Routing the laser beam to the chamber and the signal beam to the VISAR can be done safely and easily in multi-mode optical fibers. We have optimized a fiber-coupled VISAR system for measuring flyer-plate velocities. This system given constant signal levels over the full travel of the flyer plate. Furthermore, the signal-collection efficiency is maximized, which allows use of a moderately sized laser. We also have optimized the VISAR cavity so it does not limit the system efficiency while giving a velocity sensitivity of about 1 km/s per fringe. 5 refs.

My first encounter with a quality assurance auditor is reminiscent of an old Dodge commercial. You remember The old sheriff, masked in mirrored sunglasses, paunch hanging over his gun belt, prophesying, You're in a heap o' trouble boy '' Well, my auditor could have been kin to the sheriff; they had the same posture, attitude, and mirrored sunglasses. Plus, my auditor wore a black leather vest and sported a Buffalo Bill'' goatee. While certainly memorable, both gentlemen were far from pleasant. I'm fairly certain that the compliance auditor of old deserved this perceived association with his law enforcement counterpart. Both believed in enforcing the letter of the law, or their interpretations of it. Neither seemed capable of exercising interpretive powers, but instead relied on winning through intimidation, possibly with an eye toward claiming some version of a monthly Quota Award. Is the auditor of today any better perceived Because this first encounter of the worst kind'' made a lasting impression on me, I have dedicated considerable time and effort trying to avoid being perceived as another sheriff when I conduct audits. In my auditing career, I am determined to capitalize on each opportunity to turn negative situations, as experienced by …

This document discusses thermal performance envelopes which are used to specify steady-state design requirements for the systems of the Modular High Temperature Gas-Cooled Reactor to maximize plant performance reliability with optimized design. The thermal performance envelopes are constructed around the expected operating point accounting for uncertainties in actual plant as-built parameters and plant operation. The components are then designed to perform successfully at all points within the envelope. As a result, plant reliability is maximized by accounting for component thermal performance variation in the design. The design is optimized by providing a means to determine required margins in a disciplined and visible fashion.

We are literally surrounded by radiofrequency (RFR) and microwave radiation, from both natural and man-made sources. The identification and control of man-made sources of RFR has become a high priority of radiation safety professionals in recent years. For the purposes of this paper, we will consider RFR to cover the frequencies from 3 kHz to 300 MHz, and microwaves from 300 MHz to 300 GHz, and will use the term RFR interchangeably to describe both. Electromagnetic radiation and field below 3 kHz is considered Extremely Low Frequency (ELF) and will not be discussed in this paper. Unlike x- and gamma radiation, RFR is non-ionizing. The energy of any RFR photon is insufficient to produce ionizations in matter. The measurement and control of RFR hazards is therefore fundamentally different from ionizing radiation. The purpose of this paper is to acquaint the reader with the fundamental issues involved in measuring and safely using RFR fields. 23 refs.

This paper summarizes a system integration approach to residential heating, cooling, and ventilation, embodied in a tight building envelope with precooling and dehumidification of forced ventilation air, and with ducts in the conditioned space.

A customary approach to auditing and reporting deficiencies is to keep a running list of those that are found, evaluate the severity of each, and based on the evidence, document findings or observations or concerns in an audit report. The report is issued and the auditee is normally requested to address root cause'' as part of their corrective action. This paper describes a root problems'' approach to documenting audit findings that is designed not only to put the QA auditor in a more favorable light, but to more effectively enable the auditee to identify root cause and meaningful corrective action. The positive results of this approach are considerable. You will have fewer findings but those you do have will be substantial. You will cite requirements that sound reasonable and make arguments difficult. If some of the supporting deficiencies (examples) prove to be incorrect, you will still have ample support for the original finding. You will be seen as reasonable individual who can help lead the auditee towards identification of root cause without taking away part of the responsibility. You even have a fair chance of fostering a sense of commitment to quality improvement on the auditee's part. This in itself, …

Characterization of ceramic matrix composites (continuous and whisker-type) by nondestructive evaluation (NDE) methods and an understanding of fracture behavior, together with correlation of fracture and NDE data, may provide insight into the prediction of component performance and the development of process technology. Knowledge of the degradation extent of fiber tows or monofilament degradation after processing, extent of open porosity before densification, and filament/fiber alignments before and after processing are also examples of important variables to be measured. Work in this program has emphasized continuous fiber ceramic matrix composites (CFCCs) that use chemical vapor infiltration (CVI)-infiltrated SiC/SiC materials, primarily those made of Nicalon satin or plain weave with 16 {times} 16 tows/in. in 2-D layups. All studied samples were provided by Oak Ridge National Laboratory and were made using 100 layers per inch. CVI specimens with 0/30/60, 0/90, and 0/45 were examined by 3-D X-ray microtomography to characterize in-plane fiber orientations. Current information suggests that for Nicalon-type fiber architecture, a {plus minus}2--1/2{degrees} misalignment may not affect mechanical properties. Thus the near-term goal has been to establish a detection capability for angular orientation. By using 512 {times} 512 images from 3-D X-ray CT data with pixel sizes of < 140 {mu}m and …

Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x} (2212) and (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (2223) superconductors have orthorhombic crystal structures. They form platelike grains that at high temperatures grow primarily in the a-b planes and not in the c direction. The diffusional properties of Bi-Sr-Ca-Cu-O superconductors are so anisotropic that 2212 and 2223 cannot, in general, be densified by solid-state sintering. Improved densification can be achieved by application of pressure or by use of transient liquid phases. Most useful bulk Bi-Sr-Ca-Cu-O superconductors are composites that contain Ag. The Ag lowers the melting points of the superconductors, which has significant effects on microstructural development. The results of disparate sintering studies are presented and discussed.

This report is on the status of US/Polish efforts to reduce air pollution from low emission sources (coalfired house stoves and local boilers) in Krakow, Poland. The region around Krakow in Southern Poland is one of the most heavily polluted areas in the world. In 1989, while visiting Poland, President George Bush made a commitment on behalf of the US to assist in the reclamation of the Krakow environment; Congress in 1990 authorized $20 million to address pollutants from low emissions sources,'' that is, from facilities with low stacks. The low emission sources are responsible for 35 percent of SO{sub x} emissions, significant NO{sub x} emissions, and are the primary source of particulate and organic emissions. The Krakow Clean Fossil Fuels and Energy Efficiency Project, sponsored by the US Agency for International Development and implemented by the US Department of Energy, is designed to reduce these emissions by improving the efficiency of coal use in Krakow's 130,000 coal stoves and 1300 small coal-fired boilerhouses, by reducing demand for energy for space conditioning through thermal integrity improvements, and/or by switching to alternative fuels. The project includes a comprehensive testing program, engineering analyses, and economic assessments to determine the most attractive strategy …

This paper presents trends in oil-fired residential heating appliance design that take advantage of recent research which promises significantly lower pollutant emissions, improved performance, and efficiency.

The thermochemical conversion of biomass feedstocks to liquid transportation fuels can be accomplished by three processes, namely gasification, high-pressure liquefaction, and pyrolysis. In this study, the pyrolysis option is selected which is followed by the catalytic upgrading of pyrolysis vapors to aromatic and olefinic hydrocarbons (PYROCAT process). The aromatics constitute a high-octane gasoline blend, while the olefins can be utilized as feedstocks for various chemicals. The PYROCAT process has been studied in a laboratory-scale fixed-bed catalytic reactor. Consecutive biomass samples were pyrolyzed rapidly in steam at 550{degree}C and atmospheric pressure, and then the pyrolysis vapors were passed over a zeolite catalyst. The catalytic upgrading products were monitored in real-time using molecular-beam mass-spectrometry (MBMS). The yields of major products were estimated from mass-spectral data. Several zeolite catalysts were screened in the upgrading process and promising catalysts with high yields were identified. Feedstocks studied included: the woody biomass species aspen (Populus tremuloides), basswood (Tilia americana), and willow (Salix alba); the three isolated components of wood lignin, xylan and cellulose; and the herbaceous species bagasse (Saccharum spp. hybrid), wheat straw (Triticum aestivum), and Sericea lespedeza (Lespedeza cuneata). 17 refs.

Knowledge of the heat deposition profile is crucial to all transport analysis of beam heated discharges. The heat deposition profile can be inferred from the fast ion birth profile which, in turn, is directly related to the loss of neutral atoms from the beam. This loss can be measured spectroscopically be the decrease in amplitude of spectral emissions from the beam as it penetrates the plasma. The spectra are complicated by the motional Stark effect which produces a manifold of nine bright peaks for each of the three beam energy components. A code has been written to analyze this kind of data. In the first phase of this work, spectra from tokamak shots are fit with a Stark splitting and Doppler shift model that ties together the geometry of several spatial positions when they are fit simultaneously. In the second phase, a relative position-to-position intensity calibration will be applied to these results to obtain the spectral amplitudes from which beam atom loss can be estimated. This paper reports on the computer code for the first phase. Sample fits to real tokamak spectral data are shown.

A task group has revised the dosimetric model of the respiratory tract used to calculate annual limits on intake of radionuclides. The revised model can be used to project respiratory tract doses for workers and members of the public from airborne radionuclides and to assess past exposures. Doses calculated for specific extrathoracic and thoracic tissues can be adjusted to account for differences in radiosensitivity and summed to yield two values of dose for the respiratory tract that are applicable to the ICRP tissue weighted dosimetry system.

The relative biological effectiveness (RBE) for low-LET radiation is known to depend on such factors as LET and dose rate. Microdosimetric calculations indicate that the biological target size could also be an important parameter, and calculations predict that the RBE for effects produced by hits in target sizes below about 100 nm should be unity for all low LET radiation. We have measured that RBE for gene conversion in yeast (a small target) for five different low LET photon sources, and the results were consistent with an RBE of unity, which agrees with microdosimetric predictions. 4 refs.

A workshop was held at APS to address reliability goals for accelerator systems. Seventy-one individuals participated in the workshop, including 30 from other institutions. The goals of the workshop were to: (1) Give attendees an introduction to the basic concepts of reliability analysis. (2) Exchange information on operating experience at existing accelerator facilities and strategies for achieving reliability at facilities under design or in construction. (3) Discuss reliability goals for APS and the means of their achievement. This report contains the working group summary report an APS's following systems: RF Systems; Power Supplies; Magnet Systems; Interlock and Diagnostics; and Vacuum Systems.

Amorphous silicon is a thin film option that has the potential for a cost-effective product for large-scale utility photovoltaics application. The initial efficiencies for single-junction and multijunction amorphous silicon cells and modules have increased significantly over the past 10 years. The emphasis of research and development has changed to stabilized efficiency, especially that of multijunction modules. NREL has measured 6.3%--7.2% stabilized amorphous silicon module efficiencies for US products, and 8.1% stable efficiencies have been reported by Fuji Electric. This represents a significant increase over the stabilized efficiencies of modules manufactured only a few years ago. An increasing portion of the amorphous silicon US government funding is now for manufacturing technology development to reduce cost. The funding for amorphous silicon for photovoltaics by Japan over the last 5 years has been about 50% greater than that in the United State, and by Germany in the last 2--3 years more than twice that of the US Amorphous silicon is the only thin-film technology that is selling large-area commercial modules. The cost for amorphous silicon modules is now in the $4.50 range; it is a strong function of plant production capacity and is expected to be reduced to $1.00--1.50/W{sub p} for plants with …