The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system.

This paper presents a discussion of ASME Section 11 Pump and Valve Inservice Testing relief request reviews by the NRC and their contractors. Topics that will be discussed include the scope of USNRC reviews in Technical Evaluation Reports (TERs) (and Safety Evaluation, SEs); including the basis for granting relief requests, the status of relief requests in IST Program updates, and the Generic Letter 89-04 approval process; and the level of technical detail required in submitted programs. This presentation is based on the experiences of Brookhaven National Laboratory in reviewing IST Programs for the Mechanical Engineering Branch of the US Nuclear Regulatory Commission.

The SLD detector at the Stanford Linear Accelerator Center is a general purpose device for studying e{sup +}{epsilon}{sup {minus}} interaction at the Z{sup 0}. The SLD calorimeter system consists of two parts: a lead Liquid Argon Calorimeter (LAC) with both electromagnetic (22 radiation lengths) and hadronic sections (2.8 absorption lengths) housed inside the coil, and the Warm Ion limited streamer tubes Calorimeter (WIC) outside the coil which uses as radiator the iron of the flux return for the magnetic field. The WIC completes the measurement of the hadronic shower energy ({approximately}85% on average is contained in the LAC) and it provides identification and tracking for muons over 99% of the solid angle. In this note we report on the construction, test and commissioning of such a large system.

Leaves show a variety of strategies for maximizing CO{sub 2} and light capture. These are more meaningfully explained if they are considered in the context of maximizing capture relative to the utilization of water, nutrients and carbohydrates reserves. There is considerable variation between crops in their efficiency of CO{sub 2} and light capture at the leaf level. Understanding of these mechanisms indicate some ways in which efficiency of resource capture could be level cannot be meaningfully considered without simultaneous understanding of implications at the canopy level. 36 refs., 5 figs., 1 tab.

Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50% through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April 1991--March 1992. 8 refs.

It is well-known that there are difficulties to obtain rf power sources of significant amount for frequencies larger than 3 GHz. Yet, rf sources in the centimeter/millimeter wavelength range would be very useful to drive, for example, high-gradient accelerating linacs for electron-positron linear colliders. We would like to propose an alternative method to produce such radiation. It makes use of a short electron bunch traveling along the axis of a waveguide which is at the same time excited by a TM propagating electromagnetic wave. It is well known that radiation can be obtained by wiggling the motion of the electrons in a direction perpendicular to the main one. The wiggling action can be included by electromagnetic fields in a fashion similar to the one caused by wiggler magnets. We found that an interesting mode of operation is to drive the waveguide with an excitation frequency very close to the cut off. For such excitation, the corresponding e.m. wave travels with a very large phase velocity which in turn has the effect to increase the wiggling action on the electron bunch. Our method, to be effective, relies also on the coherence of the radiation; that is the bunch length is taken …

Given a sufficiently bright electron beam, the self-amplified-spontaneous emission (SASE) can provide gigawatts of short wavelength coherent radiation. The advantages of SASE approach are that is requires neither optical cavity nor an imput seed laser. In this note, we estimate the peak power performance of SASE for wavelengths shorter than 1000 {Angstrom}. At each wavelength, we calculate the saturated power from a uniform parameter undulator and the enhanced power from a tapered undulator. The method described here is an adaptation of that discussed by L.H. Yu, who discussed the harmonic generation scheme with seeded laser, to the case of SASE.

The feasibility of utilizing the differential heating characteristics of microwave energy (MW) to aid in the chemical extraction and separation process of hazardous organic compounds from mixed hazardous waste, was studied at the INEL. The long-term objective of this work was to identify a practical method of separating or enhancing the separation process of organic hazardous waste components from mixed waste using microwave (MW) frequency radiation. Methods using MW energy for calcination, solidification, and drying of radioactive waste from nuclear facilities is becoming more attractive. In order to study the effectiveness of MW heating, samples of several organic chemicals simulating those which may be found at the Radioactive Waste Management Complex at the INEL were exposed to MW energy. Vapor collection and analysis was performed as a function of time, signal frequency, and MW power throughout the process. Signal frequencies ranging from 900 MHz t 8000 MHz were used. Although the signal frequency bandwidth of the selectivity was quite broad, for the material tested an indication of the frequency dependence in the selectivity of MW heating was given. Greater efficiency in terms of energy used and time required was observed. The relatively large electromagnetic field intensities generated at the resonant …

Development of biotechnology for treatment of geothermal residual waste is aimed at the application of low-cost biochemical processes for the surface treatment and disposal of residual geothermal sludges. These processes, in addition to the lowering of disposal cost, are designed to be environmentally acceptable. Recent studies at Brookhaven National Laboratory (BNL) have shown that optimization of several process variables results in fast rates (<24h) of metal removal from residual sludges at acidic pH ({minus}1--2). Optimization of the process variables also enables the removal of radioactive isotopes. In addition, the aqueous phase produced during the bioprocessing which contains solubilized metals can be further treated in a manner which precipitates out the metals and renders the aqueous effluent toxic metal free. In this paper, the various process options will be discussed in terms of biotreatment variables. Chemical composition before and after biotreatment will also be discussed in terms of long-range effects, quality assurance and potential disposal costs.

Par Pond and L Lake are reservoirs on the Savannah River Site in South Carolina. Beds of aquatic macrophytes (primarily cattail and waterlilies) exist in Par Pond and are now beginning to develop in L Lake. Biophysical knowledge about Par Pond was used to develop environmental constraint criteria' to predict the future spatial distribution of aquatic macrophytes in L Lake. The L Lake biophysical data were placed in a 5 {times} 5 m raster geographic information system (GIS) and analyzed using Boolean logic. Areas in L Lake which were {le}4 m in depth, {le}10% slope, had a fetch of {le}500 m, and on suitable soil were identified. The final GIS model predicted the spatial distribution of 37.30 ha of aquatic macrophytes which met the environmental constraint criteria (cattails = 12.29 ha and waterlilies = 25.01 ha).

A Molecular Sieve Regeneration System (MSRS) is being added to the existing Tritium Waste Treatment system (TWT) within the Tritium Systems Test Assembly (TSTA) at the Los Alamos National Laboratory. This system is an upgrade to the TWT to provide accurate measurements of the liquid waste generated from this system. Within the TWT, hydrogen isotopes are removed from the effluent gas stream by the catalytic conversion to water and the subsequent removal of water by molecular sieve trapping prior to the release to the environment. Within the TWT and similar systems, molecular sieve regeneration is required to rejuvenate the beds. The major difference of the MSRS and other regeneration systems is the capability of direct assay of long-term storage waste containers. This is accomplished with loop-flow regeneration, water collection, and tritiated water assay by scintillation and calorimetric techniques. This paper describes the MSRS in detail and how it is interfaced with the Tritium Waste Treatment system.

Field-reversed configurations of energetic large orbit ions with neutralizing electrons have been proposed as the basis of a fusion reactor. Vlasov equilibria consisting of a ring or an annulus have been investigated. A stability analysis has been carried out for a long thin layer of energetic ions in a low density background plasma. There is a growing body of experimental evidence from tokamaks that energetic ions slow down and diffuse in accordance with classical theory in the presence of large non-thermal fluctuations and anomalous transport of low energy (10 keV) ions. Provided that major instabilities are under control, it seems likely that the design of a reactor featuring energetic self-colliding ion beams can be based on classical theory. In this case a confinement system that is much better than a tokamak is possible. Several methods are described for creating field reversed configurations with intense neutralized ion beams.

A method is described for obtaining monodomain PbTiO{sub 3} single crystals with high electrical resistivity (10{sup 10}{Omega} cm) and low dielectric frequency dispersion. The single crystals of PbTiO{sub 3} were grown by flux solution method. Space charge related defects, which result in the large dielectric frequency dispersion, were eliminated by heat treatments. 90{degrees} domains were removed by applying a unidirectional compressive stress along the <100> crystallographic direction. The monodomain single crystals of PbTiO{sub 3} were identified by cross polarized light optical microscopy and by X-ray diffraction (rocking curve). The anisotropic dielectric constants of these high quality single crystals were measured as a function of temperature. The results differ from the data reported previously in the literature.

The development and potential utilization of ceramic materials is dependent on a systematic effort involving processing, characterization and appropriate property measurements. The methods of characterization are numerous and it is important to employ the one that is appropriate to the problem both in terms of its information content and the achievable level of resolution. With the incorporation of fine probe forming capabilities in a transmission electron microscope and the development of related diffraction, imaging and spectroscopic methods, it is now possible to obtain structural and chemical information from the same region of the sample at high spatial resolution. In this review, recent advances along with representative examples in the application of high resolution electron microscopy (HREM), convergent beam electron diffraction (CBED), low atomic number element microanalysis by x-ray emission spectroscopy (XES), fine structures in electron energy-loss spectroscopy (EELS) and specific site occupancy determination by channeling experiments are discussed.

An understanding of the chemical composition of such slags under boiler operating conditions and as function of the mineral composition of various coals is the ultimate goal of this program. The experiment involves scanning through the K- or L-shell absorption edge of the element in question. The structure of the absorption edge, consisting of transitions to unoccupied molecular levels, can be compared to those of model compounds for identification. The relative position of the absorption edge can yield information regarding the oxidation state of the element. This portion is the X-ray Absorption Near Edge Structure (XANES) portion of the spectrum. The Extended X-ray Absorption Fine Structure (EXFAS) region, extending from about 60 eV above the absorption edge, represents scattering from neighboring constituents and can be used to determine the coordination number of coordination distance of a specific element from its neighboring atoms. The best source of excitation energy for these experiments is an electron storage ring emitting synchrotron radiation (SR). The National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory is a 2.5 GeV storage ring and emits a continuous spectrum of x rays to an energy of about 30 keV. Beam line X-19A is dedicated to XANES and EXAFS …

This paper will discuss one of these automatic tools that has been developed recently by Cray Research, Inc. for use on its parallel supercomputer. The tool is called ATEXPERT; when used in conjunction with the Cray Fortran compiling system, CF77, it produces a parallelized version of a code based on loop-level parallelism, plus information to enable the programmer to optimize the parallelized code and improve performance. The information obtained through the use of the tool is presented in an easy-to-read graphical format, making the digestion of such a large quantity of data relatively easy and thus, improving programmer productivity. In this paper we address the issues that we found when the took a large Los Alamos hydrodynamics code, PUEBLO, that was highly vectorizable, but not parallelized, and using ATEXPERT proceeded to parallelize it. We show that through the advice of ATEXPERT, bottlenecks in the code can be found, leading to improved performance. We also show the dependence of performance on problem size, and finally, we contrast the speedup predicted by ATEXPERT with that measured on a dedicated eight-processor Y-MP.

There is growing interest in the environmental, health, and safety issues related to new photovoltaic technologies as they approach commercialization. Such issues include potential toxicity of II--VI compounds; the impacts of new environmental regulations on module manufacturers; and, the need for recycling of spent modules and manufacturing wastes. This paper will review these topics. 20 refs.

An experimental study of the plasma spraying of alumina-titania powder is presented in this paper. This powder system is being used to fabricate heater tubes that emulate nuclear fuel tubes for use in thermal-hydraulic testing. Coating experiments were conducted using a Taguchi fractional-factorial design parametric study. Operating parameters were varied around the typical spray parameters in a systematic design of experiments in order to display the range of plasma processing conditions and their effect on the resultant coating. The coatings were characterized by hardness and electrical tests, image analysis, and optical metallography. Coating qualities are discussed with respect to dielectric strength, hardness, porosity, surface roughness, deposition efficiency, and microstructure. The attributes of the coatings are correlated with the changes in operating parameters.

In this paper, I offer some thoughts about least cost planning, not from the perspective of the regulator or utility, but from the perspective of a residential customer. The problem that I address is, as a homeowner in northern Virginia, I am about to make a long term fuel choice for my household, where the options include, natural gas, electricity and fuel oil. An additional choice is the energy efficiency capital investment in my home that could decrease my monthly fuel costs. My decision process, hopefully as a rational consumer, offers implications about the efficiency of various services provided by all three fuel suppliers, including the local natural gas distribution companies (LDC).

The objective of this study is to develop an improved sorbent which can reduce H{sub 2}S levels up to 1 ppmv or less, which can stabilize zinc, and produce economically recoverable amounts of elemental sulfur during regeneration. For this purpose, the desulfurization performance of sorbents prepared by the addition of various amounts of V{sub 2}O{sub 5} to the zinc ferrite sorbent is investigated.

A closer look at the energetics of antiproton annihilation in real systems, coupled to hydrodynamics, materials strength, particle transport, equations of state, and related interactions is necessary to assess ultimate viability. The systematics of antiproton microfission-fusion are the subject of this analysis, as well as technology constraints.

The Fermilab Tevatron Muon Experiment has analyzed the hadron showers of events resulting from the scattering of a muon beam (< E{sub {mu}} > = 490 GeV) off H{sub 2}, D{sub 2} and Xenon targets. The topics which will be discussed are: (1) space-time evolution of the hadronization process; (2) leading hadron distributions in the shadowing region; (3) rates and characteristics of 3-jet events. 23 refs.

Acoustic telemetry has been a dream of the drilling industry for the past 50 years. It offers the promise of data rates which are one-hundred times greater than existing technology. Such a system would open the door to true logging-while-drilling technology and bring enormous profits to its developers. The basic idea is to produce an encoded sound wave at the bottom of the well, let it propagate up the steel drillpipe, and extract the data from the signal at the surface. Unfortunately, substantial difficulties arise. The first difficult problem is to produce the sound wave. Since the most promising transmission wavelengths are about 20 feet, normal transducer efficiencies are quire low. Compounding this problem is the structural complexity of the bottomhole assembly and drillstring. For example, the acoustic impedance of the drillstring changes every 30 feet and produces an unusual scattering pattern in the acoustic transmission. This scattering pattern causes distortion of the signal and is often confused with signal attenuation. These problems are not intractable. Recent work has demonstrated that broad frequency bands exist which are capable of transmitting data at rates up to 100 bits per second. Our work has also identified the mechanism which is responsible for …

This paper discusses issues and approaches dealing with conceptualizing, implementing, and maintaining configuration control commensurate with the conduct of operations approach defined by DOE ORDER 5480.19. Specific topics reviewed will include key elements of assessments to determine the status quo such as assessment criteria, assessment personnel, and assessment scope; administrative programs to maintain the status quo such as organizational definition, responsibilities, interfaces, and priorities; oversight to determine control effectiveness via compliance and performance assessment.