The prospects of legislative and regulatory action aimed at taxing, restricting or banning lead-bearing materials from manufactured products has prompted the electronics community to examine the implementation of lead-free solders to replace currently used lead-containing alloys in the manufacture of electronic devices and assemblies. The logistics for changing the well established ``tin-lead solder technology`` require not only the selection of new compositions but also the qualification of different surface finishes and manufacturing processes. The meniscometer/wetting balance technique was used to evaluate the wettability of several candidate lead-free solders as well as to establish windows on processing parameters so as to facilitate prototype manufacturing. Electroplated and electroless 100Sn coatings, as well as organic preservatives, were also examined as potential alternative finishes for device leads and terminations as well as circuit board conductor surfaces to replace traditional tin-lead layers. Sandia National Laboratories and AT&T have implemented a program to qualify the manufacturing feasibility of surface mount prototype circuit boards using several commercial lead-free solders by infrared reflow technology.

Arms control treaties, unilateral actions, and cooperative activities -- reflecting the defusing of East-West tensions -- are causing nuclear weapons to be disarmed and dismantled worldwide. In order to provide for future reductions and to build confidence in the permanency of this disarmament, verification procedures and technologies would play an important role. This paper outlines arms-control objectives, treaty organization, and actions that could be undertaken. For the purposes of this Workshop on Verification, nuclear disarmament has been divided into five topical subareas: Converting nuclear-weapons production complexes, Eliminating and monitoring nuclear-weapons delivery systems, Disabling and destroying nuclear warheads, Demilitarizing or non-military utilization of special nuclear materials, and Inhibiting nuclear arms in non-nuclear-weapons states. This paper concludes with an overview of potential methods for verification.

The Pantex plant presently processes about 45,000 kg (100,000 lb) of high explosives annually by outdoor burning. About half of the explosives are weapon components weighing over 5 kg (10 lb) which come directly out of nuclear weapons being removed from the stockpile. The other half is generated from various support processes, special tests, etc. Burning serves the three-fold purpose of demilitarizing, removing all classified characteristics, and eliminating the severe hazard posed by the explosives themselves. Transporting such large quantities of classified high explosives for such processing at another site would be prohibitive. Computerized atmospheric modelling of the burning process was conducted during the past year. The results were somewhat surprising in that oxides of nitrogen and carbon monoxide, two ``criteria pollutants,`` were not of great concern even though it is known that high explosives contain significant amounts of nitrogen and they generate measureable amounts of carbon monoxide when they are burned. Rather, it was determined that hydrogen fluoride gas is of much greater concern, and stringent controls on the burning operation have been implemented to address this concern. Although the amount of fluorine-containing explosive must be restricted, other kinds of air emissions are not a great concern. This favorable …

Microstructures and textures which develop during cold deformation are compared to those which develop during hot deformation. This comparison is made using the evolutionary framework of grain subdivision and the formation of low energy dislocation structures. During deformation grains are subdivided into differently deforming regions separated by geometrically necessary dislocation boundaries. These boundaries include dense dislocation walls, microbands, lamellar boundaries and subgrains. Grain subdivision occurs as a result of the requirement for strain accommodation balanced by energy considerations. This grain subdivision weakens the texture and increases the texture scatter. The tendency for grain subdivision decreases with increasing temperature of deformation with implications for the microstructural evolution and the texture formation.

The situation in solar neutrino physics has changed drastically in the past few years, so that now there are four neutrino experiments in operation, using different methods to look at different regions of the solar neutrino energy spectrum. These experiments are the radiochemical {sup 37}Cl Homestake detector, the realtime Kamiokande detector, and the different forms of radiochemical {sup 71}Ga detectors used in the GALLEX and SAGE projects. It is noteworthy that all of these experiments report a deficit of observed neutrinos relative to the predictions of standard solar models (although in the case of the gallium detectors, the statistical errors are still relatively large). This paper reviews the basic principles of operation of these neutrino detectors, reports their latest results and discusses some theoretical interpretations. The progress of three realtime neutrino detectors that are currently under construction, SuperKamiok, SNO and Borexino, is also discussed.

In 1996, the Savannah River Site plans to begin operation of the Consolidated Incineration Facility (CIF) to treat solid and liquid RCRA hazardous and mixed wastes. The Savannah River Technology Center (SRTC) leads an extensive technical support program designed to obtain incinerator and air pollution control equipment performance data to support facility start-up and operation. Key components of this technical support program include recently completed waste burn tests at both EPA`s Incineration Research Facility and at Energy and Environmental Research Corporation`s Solid Waste Incineration Test Facility. The main objectives for these tests were determining the fate of heavy metals, measuring organics destruction and removal efficiencies, and quantifying incinerator offgas particulate loading and size distribution as a function of waste feed characteristics and incineration conditions. In addition to these waste burning tests, the SRTC has recently completed installations of the Offgas Components Test Facility (OCTF), a 1/10 scale CIF offgas system pilot plant. This pilot facility will be used to demonstrate system operability and maintainability, evaluate and optimize equipment and instrument performance, and provide direct CIF start-up support. Technical support programs of this type are needed to resolve technical issues related with treatment and disposal of combustible hazardous, mixed, and low-level …

Polymeric silica sols were used to prepare membranes on commercial {gamma}-A1{sub 2}O{sub 3} supports. Aging of the silica sols was shown to be effective to form discrete membrane layers. He/N{sub 2} selectivity factors exceeding ideal Knudsen values were observed when the sols were prepared under conditions in which the condensation rate was minimized. It is proposed that the average pore size of the membrane depends on the balance of capillary pressure and modulus during membrane deposition and that the breadth of the pore size distribution might be influenced by the extent of condensation accompanying membrane deposition. The use of organic templates may allow independent control of pore size, pore shape, and pore volume. The membranes are to be used in processing natural gas (gas separation/purification).

This report discusses the finite element method analysis which was used to refine the SPR III-M reactor fuel assembly mechanical design to withstand the stresses and strains of pulse-mode operation, which induces thermal shock loading in the fuel assembly components. The original reactor design was analyzed for its structural response to separate pulses at increasingly severe levels. Subsequent calculations at one consistent pulse level examined several design modifications, which will result in a significant reduction in stress in the final design.

The first practical use of graphite intercalation compounds (GIC) as battery anodes was reported in a 1981 patent by Basu in which a molten salt cell was described having a negative electrode that consisted of lithium intercalated in graphite. A second patent by Basu, issued in 1983, described an ambient temperature rechargeable system which also utilized lithium intercalated in graphite as the anode. Work in this area progressed at a low level, however, until interest was sparked in 1990 when Sony Corporation announced a new ``lithium-ion`` rechargeable cell containing a lithium ion intercalating carbon anode. These cells have the advantages of metallic lithium systems; i.e., high energy density, high voltage, and light weight, without the disadvantages of dendrite formation on charge and the safety considerations associated with metallic lithium. Materials other than carbon have been studied as intercalation anodes. Examples are Fe{sub 2}O{sub 3}, WO{sub 2} and TiS{sub 2}. Although these alternate anode materials are of interest academically and for specialty applications, they do not hold much promise for widespread general use due to their increased weight and lower cell voltage. Studies of cathode materials for lithium-ion systems have centered on the transition metal chalcogenides. A number of these materials …

The great variety of instruments proposed for LANSCE-II entails an equally varied set of requirements for the target stations moderators. Besides the obvious features such as intensity and pulse width of the neutron pulse, a number of more pragmatic questions have to be addressed such as fast neutron background and energy deposition in the moderators, especially at large proton beam powers such as the 1 MW proton beam power proposed for LANSCE-II.

Flux tubes are one of the most elementary systems of quantum chromodynamics. They are the idealized configurations of heavy quark-antiquark pairs at large separations L such that the region between can be assumed to possess axial-cylindrical symmetry. They play a central role in lattice QCD calculations and in models of QCD, as well as in the phenomenology of QCD processes. Lattice QCD calculations on flux tubes are generally limited to the quenched approximation (no massless quarks) and allow for a separation of the heavy quark-antiquark of only about 1 fm. Static flux tubes are unstable at separations greater than 1 fm, since the energy required to stretch the tube by 1 fm is about 1 GeV and that is about the energy difference between a quarkonium, Q{bar Q}, and a pair of heavy-light mesons, Q{bar q} + {bar Q}q. Lattice calculations without light quarks cannot explore this instability. The author then reviews work on efforts to explore the creation of light quark pairs as a mechanism for flux tube breaking.

The interaction of intense, sub-picosecond laser pulses with solid targets produces intense picosecond x-ray pulses. With focused laser pulses of several 10 {sup 18} W/cm{sup 2}, He-like and H-like line radiation from targets such as aluminum and silicon has been produced. The energy conversion efficiency from the laser pulse energy to the 1--2 keV line x-rays is nearly one percent. The duration of the line x-ray radiation is of the order of ten picoseconds, although this may be an upper estimate because of the temporal resolution of the x-ray streak camera. The spatial extent of the x-ray source region is only slightly larger than the laser focal spot, or about 10 {mu}m in diameter. With these characteristics, such x-ray sources emit an intensity of nearly 10{sup 14} W/cm{sup 2}. Experiments and modeling which led to the above conclusions will be discussed.

A small amount of transuranic (TRU) waste has been disposed of at the Greater Confinement Disposal (GCD) site located on the Nevada Test Site`s (NTS) Radioactive Waste Management Site (RWMS). The waste has been buried in several deep (37 m) boreholes dug into the floor of an alluvial basin. For the waste to remain in its current configuration, the DOE must demonstrate compliance of the site with the TRU disposal requirements, 40 CFR 191. Sandia`s approach to process modelling in performance assessment is to use demonstrably conservative models of the site. Choosing the most conservative model, however, can be uncertain. As an example, diffusion of contaminants upward from the buried waste in the vadose zone water is the primary mechanism of release. This process can be modelled as straight upward planar diffusion or as spherical diffusion in all directions. The former has high fluxes but low release areas, the latter has lower fluxes but is spread over a greater area. We have developed analytic solutions to a simple test problem for both models and compared the total integrated discharges. The spherical diffusion conceptual model results in at least five times greater release to the accessible environment than the planar model …

What does the pulp and paper industry have in common with the desert southwest and nuclear weapons? As a representative of one of the Nations three nuclear weapons design laboratories (Los Alamos National Laboratory, Livermore National Laboratory and Sandia National Laboratories), my goal is to identify ``dual-benefit`` technologies where codevelopment will both strengthen the nation`s competitive position and enhance national security. In development of this presentation, I found more common elements than I could possibly survey in this brief period.

Nucleation and growth studies were conducted on Al-Zn alloys at several temperatures using transmission electron microscopy (TEM) with an in-situ furnace. The value of the critical undercooling was established by noting the lowest temperature at which precipitates were no longer observed, following a quench into the two-phase metastable region. These results were compared with the Langer-Schwartz model of nucleation and growth in which it is predicted that the half-completion time (i.e, the time required for the supersaturation to reach half its initial value) diverges for initial supersaturations which are higher than those predicted by the classical nucleation theory.

Target stations are vital components of the 1 MW, next generation spallation neutron source proposed for LANSCE. By and large, target stations design determines the overall performance of the facility. Many traditional concepts will probably have to be rethought, and many new concepts will have to be put forward to meet the 1 MW challenge. This article gives a brief overview of the proposed neutron spallation source from the target station viewpoint, as well as the general philosophy adopted for the design of the LANSCE-II target stations. Some of the saliant concepts and features envisioned for LANSCE-II are briefly described.

MRIVIEW is a software system which uses image processing and visualization to provide neuroscience researchers with an integrated environment for combining functional and anatomical information. Key features of the software include semi-automated segmentation of volumetric head data and an interactive coordinate reconciliation method which utilizes surface visualization. The current system is a precursor to a computational brain atlas. We describe features this atlas will incorporate, including methods under development for visualizing brain functional data obtained from several different research modalities.

An object model for genome data at all levels of resolution is described. The model was derived by considering the requirements for representing genome related objects in three application domains: genome maps, large-scale DNA sequencing, and exploring functional information in gene and protein sequences. The methodology used for the object-oriented analysis is also described.

We consider collisions between dynamically-evolved primordial binaries consisting of main-sequence stars, white dwarfs and neutron stars in globular clusters. In our four-body binary-binary scattering experiments, we allow stars to ``stick`` if they pass close enough to each other, which leads to the formation of a wide variety of exotic objects. Most of these objects have binary companions. Also, relatively clean exchange interactions can produce binaries containing neutron stars that eventually receive material from their companions. Such systems will be observable as X-ray binaries.

The rate at which elements can be transported in groundwater systems is governed in part by the solubility of the element in the groundwater. This report documents plutonium solubility experiments in a brine simulant relevant to the Waste Isolation Pilot Plant. Approximately 1 to 2.5 mL of five stock solutions containing single oxidation states of plutonium (Pu(IV)-polymer, Pu{sup 3+}, Pu{sup 4+}, PuO{sub 2}{sup +}, and PuO{sub 2}{sup 2+}) were added to {approximately}75 mL of synthetic H-17 Brine in five reaction vessels. Initial plutonium concentrations ranged from 1.3 {times} l0{sup {minus}4} to 5.l {times} l0{sup {minus}4} M (moles per liter) total plutonium. Because these initial concentrations were far above the plutonium solubility limit in H-17 Brine, plutonium-containing solids precipitated. Aqueous plutonium concentrations were measured over time until steady-state was reached, requiring over 300 days in H-17 Brine.

Initiatives to limit CO{sub 2} emissions have drawn considerable interest to integrated gasification combined-cycle (IGCC) power generation, a process that reduces CO{sub 2} production and is amenable to CO{sub 2} capture. This paper presents a comparison of energy systems that encompass fuel supply, an IGCC system, CO{sub 2} recovery using commercial technologies, CO{sub 2} transport by pipeline, and land-based sequestering in geological reservoirs. The intent is to evaluate the energy efficiency impacts of controlling CO{sub 2} in such a system, and to provide the CO{sub 2} budget, or an equivalent CO{sub 2} budget, associated with each of the individual energy-cycle steps. The value used for the equivalent CO{sub 2} budget is 1 kg CO{sub 2}/kWh. The base case for the comparison is a 458-MW IGCC system using an air-blown Kellogg Rust Westinghouse (KRW) agglomerating fluidized-bed gasifier, Illinois No.6 bituminous coal, and in-bed sulfur removal. Mining, transportation, and preparation of the coal and limestone result in a net electric power production of 448 MW with a 0.872 kg/kWh CO{sub 2} release rate. For comparison, the gasifier output was taken through a water-gas shift to convert CO to CO{sub 2}, and processed in a Selexol unit to recover CO{sub 2} prior to …

The transverse motion of a projectile in an electromagnetic induction launcher is considered. The equations of motion for translation and rotation are derived assuming a rigid projectile and a flyway restoring force per unit length that is proportional to the local displacement. Linearized transverse forces and torques due to energized coils are derived for displaced or tilted armature elements based on a first order perturbation method. The resulting equations of motion for a rigid projectile composed of multiple elements in a multi-coil launcher are analyzed as a coupled oscillator system of equations and a simple linear stability condition is derived. The equations of motion are incorporated into the 2-D Slingshot circuit code and numerical solutions for the transverse motion are obtained. For a launcher with a 10 cm bore radius with a 40 cm long solid armature, we find that stability is achieved with a restoring force (per unit length) constant of k {approx} 1 {times} 10{sup 8} N/m{sup 2}. For k = 1.5 {times} 10{sup 8} N/m{sup 2} and sample coil misalignment modeled as a sine wave of 1 mm amplitude at wavelengths of one or two meters, the projectile displacement grows to a maximum of 4 mm. This …

A conventional NSI (NASA standard initiator) normally employs a hot-wire ignition element to ignite ZPP (zirconium potassium perchlorate). With minor modifications to the interior of a header similar to an NSI device to accommodate an SCB (semiconductor bridge), a low cost initiator was obtained. In addition, the ZPP was replaced with THKP (titanium subhydride potassium perchlorate) to obtain increased overall gas production and reduced static-charge sensitivity. This paper reports on the all-fire and no-fire levels obtained and on a dual mix device that uses THKP as the igniter mix and a thermite as the output mix.

Chemical reference tables state that the standard potential for the reaction of Pt with water, Pt + 2H{sub 2}O {r_arrow} Pt(OH){sub 2} + 2H{sup +} + 2e{sup {minus}}, is 0.98 V, and electrochemical studies propose that this reaction may occur at potentials as low as 0.8 V. Using dispersive x-ray absorption fine-structure (XAFS) spectroscopy, the authors have directly probed the structural evolution of a Pt catalyst operating in-situ in a polymer electrolyte fuel cell during cyclic voltammetry. The changes in the number of Pt and O nearest-neighbors and the Pt charge demonstrate a close correspondence with features in the voltammogram. Because dispersive XAFS is very sensitive to detecting structural changes, they have been able to detect the presence of chemisorbed oxygen at potentials of 0.6--0.9 V in the anodic sweep. Since double-layer charging is regarded as the only process in this region for bulk Pt, these results may reflect a limitation of previous (indirect) studies on Pt electrochemistry, or they may indicate that these clusters are different from their bulk metal counterparts. Exploiting the time-resolving capability of dispersive XAFS, they also monitored changes in the Pt charge and the number of O and Pt nearest-neighbors during the electrochemical oxidation and …