Article describes an energy-based analysis on the formation and growth of condensate droplets on two-tier superhydrophobic surfaces, which are fabricated by decorating carbon nanotubes (CNTs) onto microscale fluorinated pillars.

Describes study in developing an environmentally benign styrene foam using supercritical CO2.

Article discusses how protein based adhesive is limited by poor mechanical properties and water resistance. This simple and green preparation method provided a new strategy for the production of high-performance, multifunctional and economically effective SM based adhesive.

Article demonstrating the dynamic potential for tailoring the surface plasmon resonance (SPR), size, and shapes of gold nanoparticles (AuNPs) starting from an Au(I) precursor, chloro(dimethyl sulfide)gold (I) (Au(Me2S)Cl), in lieu of the conventional Au(III) precursor hydrogen tetrachloroaurate (III) hydrate (HAuCl4). This approach presents a one-step method that permits regulation of an Au(I) precursor to form either visible-absorbing gold nanospheres or near-infrared-window (NIRW)-absorbing anisotropic AuNPs.

This article aims to give a summary of the state of the art of non-enzymatic electrochemical sensors used for detection of neurotransmitter that lack an electrochemically active component.

This article examines the chemical structures of biodegradable films created out of soy protein isolate (SPI), sodium dodecylbenzenesulfonate (SDBS) and pentaerythritol glycidyl ether (PEGE). The thermal stabilities of the films were also examined by means of the thermo-gravimetric analysis.

Article describes study analyzing the characteristics of the movement of the gel extinguishing agent micelles by considering the resistance of movement.

This article focuses on a way to maximize the concentration acceptance product (CAP), while using the minimum SOE and receiver geometry at a given f-number and incidence angle (also referred to as the tracking error angle). The laws of polychromatic light refraction along with trigonometry and spherical geometry were utilized to optimize the POE grooves, SOE radius, receiver size, and SOE–receiver spacing.

Article is a study investigating how to obtain the natural frequency of functionally graded porous beams simply supported on an elastic substrate in thermal surroundings by the theory of third-order shear deformation. This article is part of the special issue titled Dynamic Analysis and Vibration Control of Mechanical Structures Coupled with Rotational Systems.

This article describes pneumatic energy being converted into solid particle kinetic energy as a solid-particle-entrained gas that flows downward through a vertical nozzle. For the conditions studied, the solid particles serve as a heat exchange medium to enable a gas expansion that is nearly isothermal. Also, the kinetic energy associated with the two-phase fluid is predominantly that associated with subsonic solid-particle motion. The kinetic energy of the solid particles is converted into other forms using a low-speed turbine. A theoretical description of the process is presented, and the initiation of an experimental effort to study the process is described.

This article discusses the fabrication of superhydrophobic bamboo timber by magnetron sputtering and nanoimprint stamps. It was expected that this work could promote the applications of superhydrophobic and conductive bamboo products.

This article aims to improve the electrical and thermal conductivity of the polylactic acid/wood flour/ thermoplastic polyurethane composites by Fused Deposition Modeling (FDM).

Describes the development of a strong mold-resistant adhesive by incorporating soybean meal and blood meal.

Proposes a fabrication method for making a lightweight, anisotropic, and compressible wood aerogel with aligned cellulose fibers by a simple chemical treatment.

This article highlights the development of a flexible long-chain starch with a hyper-branched structure (HD), and incorporating it with SM and a crosslinking agent to prepare a novel SM adhesive. Results showed that this adhesive exhibited both excellent water resistance and enhanced toughness. The wet bond strength of plywood fabricated using this adhesive was 354.5% higher than that of SM adhesive.

This article describes a study to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 10⁸ Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and thermal stability.

This article highlights a study of a bio adhesive was developed from soybean meal and larch tannin that was designed for exterior use. Phenol hydroxymethylated tannin oligomer (PHTO) was synthesized and then mixed with soybean meal flour in order to obtain a soybean meal-based adhesive (SPA). The results showed that the moisture absorption rate, residual rate, and solid content of SPA with 10 wt % PHTO (mass ratio with respect to the entire adhesive) were improved by 22.8%, 11.6%, and 6.8%, respectively, as compared with that of pure SPA.

This article introduces a novel method using longitudinal sound to detect underground soil voids to inspect underwater bed property in terms of effective bulk modulus and effective density of the material properties.

Article examining foams made from polylactic acid (PLA) and micro cellulose fibrils (MCF) to address the need for bio-resourced foams for the building industry.

This article proposes a strategy for preparing advanced soy protein (SP)-based films by solution casting of SP and hydroxyl and primary amine-containing hyperbranched polysiloxane (HPSA). It offers a simple methodology for the design of mechanically robust, recyclable, and biodegradable composite films, which have potential applications in the fabrication of high-performance, high-transparency, and anti-counterfeiting packaging materials.

This article uses PCL to blend into PBHV. Both unfoamed and foamed blends are examined. The results provide a pathway to multifunctional performance in foams of high performance biopolymers such as PBHV through harnessing the CO₂ miscibility of PCL.

Article investigates a novel genetically themed hierarchical algorithm (GTHA) to design Fresnel lens solar concentrators that match with the distinct energy input and spatial geometry of various thermal applications.

Article describes how this study was aiming at enhancing the stain resistance and durability of varnish on wood surfaces, a super hydrophobic solution was created by blending the synthetic ZIF-8/paraffin with Hexadecyltrimethoxysilane at a specified mass ratio. This superhydrophobic mixture was then directly applied onto the wood varnish coating using a one-step method.