This article discusses a study on the regression to the origin of a walker driven by dynamically generated fractional Brownian motion.

Article discussing two different approaches, referred to as renewal and modulation, to generate time series with a nonexponential distribution of waiting times.

The National Ignition Facility (NIF) and Laser Mega Joule (LMJ) facilities are currently under construction in the United States and France. Ignited targets at these facilities are anticipated to produce up to 1019 deuterium-tritium fusion neutrons. This will provide unprecedented opportunities and challenges for the use of nuclear diagnostics in inertial confinement fusion experiments. The NIF and LMJ nuclear diagnostics will work in a harsh radiation environment that includes neutron, hard x-ray, and gamma backgrounds, neutron induced signals in coaxial cables, and electromagnetic pulse (EMP) generated signals. Recent results of different background measurements on OMEGA laser facility will be reported. Based on these results, specific design concepts have been identified to mitigate much of the radiation and EMP-induced backgrounds. An overview of the background mitigation techniques in the NIF nuclear diagnostics conceptual designs will be presented.

This talk briefly reviews three types of time-asymmetry in physics, which I classify as universal, macroscopic and microscopic. Most of the talk is focused on the latter, namely the violation of T-reversal invariance in particle physics theories. In sum tests of microscopic T-invariance, or observations of its violation, are limited by the fact that, while we can measure many processes, only in very few cases can we construct a matched pair of process and inverse process and observe it with sufficient sensitivity to make a test. In both the cases discussed here we can achieve an observable T violation making use of flavor tagging, and in the second case also using the quantum properties of an antisymmetric coherent state of two B mesons to construct a CP-tag. Both these tagging properties depend only on very general properties of the flavor and/or CP quantum numbers and so provide model independent tests for T-invariance violations. The microscopic laws of physics are very close to T-symmetric. There are small effects that give CP- and T-violating processes in three-generation-probing weak decays. Where a T-violating observable can be constructed we see the relationships between T-violation and CP-violation expected in a CPT conserving theory. These microscopic …

Transverse polarization in the Hyperon (\Lambda) production in the unpolarizeddeep inelastic scattering and pp collisions is studied in the twist-three approach, considering the contribution from the quark-gluon-antiquark correlation distribution in nucleon. We further compare our results for deep inelastic scattering to a transverse momentum dependent factorization approach, and find consistency between the two approaches in the intermediate transverse momentum region. We also find that in pp collisions, there are only derivative terms contributions, and the non-derivative terms vanish.

We report a rapid and robust separation of Saccharomyces cerevisiae and MS2 bacteriophage using acoustic focusing in a microfluidic device. A piezoelectric transducer (PZT) generates acoustic standing waves in the microchannel. These standing waves induce acoustic radiation force fields that direct microparticles towards the nodes (i.e., pressure minima) or the anti-nodes (i.e., pressure maxima) of the standing waves depending on the relative compressidensity between the particle and the suspending liquid.[1] For particles larger than 2 {micro}m, the transverse velocities generated by these force fields enable continuous, high throughput separation. Extensive work in the last decade [2-4] has demonstrated acoustic focusing for manipulating microparticles or biological samples in microfluidic devices. This prior work has primarily focused on experimental realization of acoustic focusing without modeling or with limited one-dimensional modeling estimates. We recently developed a finite element modeling tool to predict the two-dimensional acoustic radiation force field perpendicular to the flow direction in microfluidic devices.[1] Here we compare results from this model with experimental parametric studies including variations of the PZT driving frequencies and voltages as well as various particle sizes and compressidensities. These experimental parametric studies also provide insight into the development of an adjustable 'virtual' pore-size filter as well as …

{sup 13}C-based metabolic flux analysis provides valuable information about bacterial physiology. Though many biological processes rely on the synergistic functions of microbial communities, study of individual organisms in a mixed culture using existing flux analysis methods is difficult. Isotopomer-based flux analysis typically relies on hydrolyzed amino acids from a homogeneous biomass. Thus metabolic flux analysis of a given organism in a mixed culture requires its separation from the mixed culture. Swift and efficient cell separation is difficult and a major hurdle for isotopomer-based flux analysis of mixed cultures. Here we demonstrate the use of a single highly-expressed protein to analyze the isotopomer distribution of amino acids from one organism. Using the model organism E. coli expressing a plasmid-borne, his-tagged Green Fluorescent Protein (GFP), we show that induction of GFP does not affect E. coli growth kinetics or the isotopomer distribution in nine key metabolites. Further, the isotopomer labeling patterns of amino acids derived from purified GFP and total cell protein are indistinguishable, indicating that amino acids from a purified protein can be used to infer metabolic fluxes of targeted organisms in a mixed culture. This study provides the foundation to extend isotopomer-based flux analysis to study metabolism of individual strains …

'Puff and pump' radiating divertor scenarios [1,2] were applied to upper SN and DN H-mode plasmas. Under similar operating conditions, argon (Ar) accumulated in the main plasma of single-null (SN) plasmas more rapidly and reached a higher steady-state concentration when the B x {del}B ion drift direction was toward the divertor than when the B x {del}B ion drift direction was out of the divertor. The initial rate that Ar accumulated inside double-null (DN) plasmas was more than twice that of comparably-prepared SNs with the same B x {del}B direction. One way to reduce power loading at the divertor targets is to 'seed' the divertor plasma with impurities that radiatively reduce the conducted power. Studies have shown that the concentration of impurities in the divertor are increased by raising the flow of deuterium ions (D{sup +}) into the divertor by a combination of upstream deuterium gas puffing and active particle exhaust at the divertor targets, i.e., puff-and-pump. An enhanced D{sup +} particle flow toward the divertor targets exerts a frictional drag on impurities, and inhibits their escape from the divertor. A puff-and-pump approach using Ar as the impurity was successfully applied in recent DIII-D experiments to SN plasmas [3] while …

We have searched for strangelets in a triggered sample of 61 million central (top 4percent) Au+Au collisions at sqrt sNN = 200 GeV near beam rapidities at the STAR solenoidal tracker detector at the BNL Relativistic Heavy Ion Collider. We have sensitivity to metastable strangelets with lifetimes of order>_0.1 ns, in contrast to limits over ten times longer in BNL Alternating Gradient Synchrotron (AGS) studies and longer still at the CERN Super Proton Synchrotron (SPS). Upper limits of a few 10-6 to 10-7 per central Au+Au collision are set for strangelets with mass>~;;30 GeV/c2.

Salt solution will be mixed with cement and flyash/slag to form a grout which will be immobilized in above ground concrete vaults. The curing process is exothermic, and a transient thermal model of the pouring and curing process is herein described. A peak temperature limit of 85 C for the curing grout restricts the rate at which it can be poured into a vault. The model is used to optimize the pouring.

Coupled reservoir-geomechanical simulations were conductedto study the potential for tensile and shear failure e.g., tensilefracturing and shear slip along pre-existing fractures associated withunderground CO2 injection in a multilayered geological system. Thisfailure analysis aimed to study factors affecting the potential forbreaching a geological CO2 storage system and to study methods forestimating the maximum CO2 injection pressure that could be sustainedwithout causing such a breach. We pay special attention to geomechanicalstress changes resulting from upward migration of the CO2 and how theinitial stress regime affects the potential for inducing failure. Weconclude that it is essential to have an accurate estimate of thethree-dimensional in situ stress field to support the design andperformance assessment of a geological CO2 injection operation. Moreover,we also conclude that it is important to consider mechanical stresschanges that might occur outside the region of increased reservoir fluidpressure (e.g., in the overburden rock) between the CO2-injectionreservoir and the ground surface.

The Plasma Electrode Pockels Cell (PEPC) subsystem is a key component of the National Ignition Facility, enabling the laser to employ an efficient four-pass main amplifier architecture. PEPC relies on a pulsed power technology to initiate and maintain plasma within the cells and to provide the necessary high voltage bias to the cells nonlinear crystals. Ultimately, nearly 300 high-voltage, high-current pulse generators will be deployed in the NIF in support of PEPC. Production of solid-state plasma pulse generators and thyratron-switched pulse generators is now complete, with the majority of the hardware deployed in the facility. An entire cluster (one-fourth of a complete NIF) has been commissioned and is operating on a routine basis, supporting laser shot operations. Another cluster has been deployed, awaiting final commissioning. Activation and commissioning of new hardware continues to progress in parallel, driving toward a goal of completing the PEPC subsystem in late 2007.

Spatially resolved measurements of deuterium Balmer and Paschen line emission have been performed in the divertor region of the National Spherical Torus Experiment using a commercial 0.5 m Czerny-Turner spectrometer. While the Balmer emission lines, Balmer and Paschen continua in the ultraviolet and visible regions have been extensively used for tokamak divertor plasma temperature and density measurements, the diagnostic potential of infrared Paschen lines has been largely overlooked. We analyze Stark broadening of the lines corresponding to 2-n and 3-m transitions with principle quantum numbers n = 7-12 and m = 10-12 using recent Model Microfield Method calculations (C. Stehle and R. Hutcheon, Astron. Astrophys. Supl. Ser. 140, 93 (1999)). Densities in the range (5-50) x 10{sup 19} m{sup -3} are obtained in the recombining inner divertor plasma in 2-6 MW NBI H-mode discharges. The measured Paschen line profiles show good sensitivity to Stark effects, and low sensitivity to instrumental and Doppler broadening. The lines are situated in the near-infrared wavelength domain, where optical signal extraction schemes for harsh nuclear environments are practically realizable, and where a recombining divertor plasma is optically thin. These properties make them an attractive recombining divertor density diagnostic for a burning plasma experiment.

Methods for geophysical model assessment, in particuale thecomputation of model parameter resolution, indicate the value and thelimitations of time-lapse data in estimating reservoir flow properties. Atrajectory-based method for computing sensitivities provides an effectivemeans to compute model parameter resolutions. We examine the commonsituation in which water encroaches into a resrvoir from below, as due tothe upward movement of an oil-water contact. Using straight-forwardtechniques we find that, by inclusing reflections off the top and bottomof a reservoir tens of meters thick, we can infer reservoir permeabilitybased upon time-lapse data. We find that, for the caseof water influxfrom below, using multiple time-lapse 'snapshots' does not necessarilyimprove the resolution of reservoir permeability. An application totime-lapse data from the Norne field illustrates that we can resolve thepermeability near a producing well using reflections from threeinterfaces associated with the reservoir.

We describe a front-end application specific integrated circuit (ASIC) developed for a silicon Compton telescope. Composed of 32 channels, it reads out signals in both polarities from each side of a Silicon strip sensor, 2 mm thick 27 cm long, characterized by a strip capacitance of 30 pF. Each front-end channel provides low-noise charge amplification, shaping with a stabilized baseline, discrimination, and peak detection with an analog memory. The channels can process events simultaneously, and the read out is sparsified. The charge amplifier makes uses a dual-cascode configuration and dual-polarity adaptive reset, The low-hysteresis discriminator and the multi-phase peak detector process signals with a dynamic range in excess of four hundred. An equivalent noise charge (ENC) below 200 electrons was measured at 30 pF, with a slope of about 4.5 electrons/pF at a peaking time of 4 {micro}s. With a total dissipated power of 5 mW the channel covers an energy range up to 3.2 MeV.

Nanophase metallic materials show a maximum in strength as grain size decreases to the nano scale, indicating a break down of the Hall-Petch relation. Grain boundary sliding, as a possible accommodation mechanisms, is often the picture that explain computer simulations results and real experiments. In a recent paper, Bringa et al. Science 309, 1838 (2005), we report on the observation of an ultra-hard behavior in nanophase Cu under shock loading, explained in terms of a reduction of grain boundary sliding under the influence of the shock pressure. In this work we perform a detailed study of the effects of hydrostatic pressure on nanophase Cu plasticity and find that it can be understood in terms of pressure dependent grain boundary sliding controlled by a Mohr-Coulomb law.

In this paper, we estimate how quickly and how precisely a reactor's operational status and thermal power can be monitored over hour to month time scales, using the antineutrino rate as measured by a cubic meter scale detector. Our results are obtained from a detector we have deployed and operated at 25 meter standoff from a reactor core. This prototype can detect a prompt reactor shutdown within five hours, and monitor relative thermal power to 3.5% within 7 days. Monitoring of short-term power changes in this way may be useful in the context of International Atomic Energy Agency's (IAEA) Reactor Safeguards Regime, or other cooperative monitoring regimes.

None

BioTiger{trademark} is a unique microbial consortia that resulted from over 8 years of extensive microbiology screening and characterization of samples collected from a century-old Polish waste lagoon. BioTiger{trademark} shows rapid and complete degradation of aliphatic and aromatic hydrocarbons, produces novel surfactants, is tolerant of both chemical and metal toxicity and shows good activity at temperature and pH extremes. Although originally developed and used by the U.S. Department of Energy for bioremediation of oil-contaminated soils, recent efforts have proven that BioTiger{trademark} can also be used to increase hydrocarbon recovery from oil sands. This enhanced ex situ oil recovery process utilizes BioTiger{trademark} to optimize bitumen separation. A floatation test protocol with oil sands from Ft. McMurray, Canada was used for the BioTiger{trademark} evaluation. A comparison of hot water extraction/floatation test of the oil sands performed with BioTiger{trademark} demonstrated a 50% improvement in separation as measured by gravimetric analysis in 4 h and a five-fold increase at 25 hr. Since BioTiger{trademark} performs well at high temperatures and process engineering can enhance and sustain metabolic activity, it can be applied to enhance recovery of hydrocarbons from oil sands or other complex recalcitrant matrices.

The use of HTS materials in high radiation environmentsrequires that the superconducting properties remain constant up to aradiation high dose. BSCCO-2223 samples from two manufacturers wereirradiated with 50 MeV protons at fluences of up to 5 x 1017 protons/cm2.The samples lost approximately 75 percent of their pre-irradiation Ic.This compares with Nb3Sn, which loses about 50 percent at the samedisplacements per atom.

The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) is nearing completion of construction and is preparing for the National Ignition Campaign (NIC) with potentially significant yield in 2010. The design of a wide range of yield diagnostics in and outside the target-bay of the NIF must consider scattered background neutrons and neutron-induced gamma rays to measure neutrons and x-rays from target. The large and complex target chamber and facility make the calculation of scattered neutrons and gamma rays extremely challenging. The NIF was designed with shielded locations for many of the yield diagnostics including the neutron alcove and four diagnostic mezzanines. Accurate calculation of the background levels in these shielded locations requires advanced Monte Carlo techniques, e.g., variance reduction. Placement, size, and materials of collimators on the line of sight (LOS) through the shielding must be evaluated to trade off signal levels and unwanted backgrounds. The background at these locations is also affected by neutrons that pass through the laser beam tubes and scatter off of structures and walls in the switch yards. Detailed 3D Monte Carlo analyses are performed to determine neutron and gamma fluxes for some of the yield diagnostics.

Enhanced heating from shock compression of a porous material can potentially suppress or delay cracking of the material on subsequent expansion. In this paper we quantify the expected enhanced heating in an experiment in which a sector of a thin cylindrical shell is driven from the inside surface by SEMTEX high explosive ({approx}1 {micro}s FWHM pressure pulse with peak pressure {approx}21.5 GPa). We first derive an analytical equation of state (EOS) for porous metals, then discuss the coupling of this EOS with material elastic-plastic response in a 2D hydrocode, and then discuss the modeling of the HE experiment with both fully dense and 10% porous Ta and a Bi/Ta composite. Finally, we compare our modeling with some recent experimental data.

Cane-based Celotex{trademark} has been used extensively in various Department of Energy (DOE) packages as a thermal insulator and impact absorber. Cane-based Celotex{trademark} fiberboard was only manufactured by Knight-Celotex Fiberboard at their Marrero Plant in Louisiana. However, Knight-Celotex Fiberboard shut down their Marrero Plant in early 2007 due to impacts from hurricane Katrina and other economic factors. Therefore, cane-based Celotex{trademark} fiberboard is no longer available for use in the manufacture of new shipping packages requiring the material as a component. Current consolidation plans for the DOE Complex require the procurement of several thousand new Model 9975 shipping packages requiring cane-based Celotex{trademark} fiberboard. Therefore, an alternative to cane-based Celotex{trademark} fiberboard is needed. Knight-Celotex currently manufactures Celotex{trademark} fiberboard from other cellulosic materials, such as hardwood and softwood. A review of the relevant literature has shown that softwood-based Celotex{trademark} meets all parameters important to the Model 9975 shipping package.

Over the past few years, Cold Crucible Induction Melter (CCIM) demonstrations have been completed using SRS sludge batches 2, 3 and 4 (SB2, SB3 and SB4) simulant compositions. These campaigns demonstrated the ability of the CCIM to effectively produce quality glasses at high waste loadings. The current Advanced Remediation Technology (ART) Phase II-A Project is aimed at demonstrating the CCIM technology under representative DWPF flowsheet conditions and to demonstrate extended operations of the melter. A glass composition development effort was completed to identify and recommend a frit composition and sludge batch 4 (SB4) simulant waste loading target for subsequent ART-Phase II-A CCIM demonstration testing. Based on the results of the glass formulation testing, it was recommended that the Frit 503-R6 composition (B{sub 2}O{sub 3} = 14 wt %; Li{sub 2}O = 9 wt %; Na{sub 2}O = 3 wt %; and SiO{sub 2} = 74 wt %) be utilized for the demonstration. Furthermore, a waste loading of 46 wt % was recommended. The recommended frit and waste loading would produce a glass with acceptable durability with a liquidus temperature adequately below the 1250 C nominal CCIM operating temperature. This frit composition and waste loading was found to result in a …