Experiments have been performed by LLL which indicate a definite density profile steepening. One possible mechanism for this effect is the ponderomotive force. LASNEX has been modified to include the light momentum deposition in the form rho dv/dt = -nabla P - nabla(radical epsilon + radical 1/epsilon) I/2c. Results will be presented from numerical simulations on spherical glass targets at laser intensities from 10/sup 14/ to 10/sup 16/ watts/cm/sup 2/. Emphasis is placed on the nature of the density profile near the critical region as a function of laser intensity and plasma conditions. The existence of this sharp step, whose scale length is of the order of a micrometer may imply a local reduction in the thermal conductivity.

The development of large-bore, high-field magnets for fusion energy applications requires a system approach to both magnet and conductor design. At Lawrence Livermore National Laboratory (LLNL), the criteria used to choose superconductors include: strain tolerance, radiation tolerance, heat removal, stability, fabricability, and cost. We report on the performance of industrially produced, prototype, Ti-modified Nb/sub 3/Sn wires developed with LLNL support. Wire performance characteristics evaluated include critical current as a function of magnetic field, temperature, and applied strain. Tests were performed to determine how this performance translates to the performance of a cable-in-conduit conductor system using this wire. An alternative to Nb/sub 3/Sn superconductors is NbN, which is strain and radiation insensitive. We report preliminary efforts to produce multifilamentary NbN conductors by liquid-metal infiltration of NbN-coated, high-strength fibers. In addition, we discuss the fabrication of multifilamentary NbN conductors and their possible impact on magnet design.

The first targets for the 20 TW SHIVA laser system were designed. They are simple glass micro-balloons, approximately 300 ..mu..m in diameter and 2 ..mu..m thick, filled with D-T gas. Using LASNEX, whose model physics was utilized successfully for ARGUS targets, we optimize for both gain and yield. The target behaves as an exploding pusher. Different simple analytic models for the physics of this mode are presented, and are tested by comparing their scaling predictions, at constant absorbed power, with those demonstrated by LASNEX. Emphasis is placed on successful prediction of the basic quantities of peak ion temperature and compression, rather than neutron yield or n tau.

When 001 plates of KD{sub 2}PO{sub 4} (KD*P) are used in Pockels cells, strain induced refractive index variations result in beam depolarization and transmitted wavefront distortion. The depolarization is determined by the induced birefringence while the wavefront distortion is controlled by the average index shift. Here we show that the birefringence is determined by the shear stress in the xy-plane of the crystal while the average index shift depends only on the normal stresses. Furthermore, for depolarization losses of 0.1 to 1.0% and wavefront distortion of 0.1 to 1.0{lambda}, the critical range of stress is 10{sup 5} to 10{sup 6} Pa. We also present measured depolarization loss and wavefront distortion profiles for 5, 16 and 27cm, 95% deuterated, KD*P crystals. Using the analysis described above we show that the maximum internal stresses in the crystals are within the critical range, but that the area averaged stresses are substantially lower. We find that crystals from different locations along the length of a boule have similar strain birefringence and wavefront distortion profiles indicating that the growth conditions which generate the internal strain persist throughout much of the growth history of the boule. Finally, we discuss potential sources of strain in KD*P. 8 …

The lowest mesons made up of a light quark and a strange quark produced from a K beam show a good agreement with expectations of the quark model. This good agreement leads to the prediction of the light isoscalar and isovector states and the isoscalar s{bar s} states. Except for one mystery The X(1590) the 2{sup ++} states seems to be well described by the expected ideally mixed q{bar q} states up to 2. 0 GeV. Above 2.0 GeV a new degree of freedom seems to be excited with respect to the breakdown of the OZI rule in production of 2{sup ++} resonances that decay into {phi}{phi}. This is to be contrasted with the situation for the O{sup ++} isoscalar states which seems to show a new degree of freedom for its mesons in its ground state. One might conclude that since the O{sup ++} glueball is predicted by lattice calculations to be degenerate with the s{bar s} O{sup ++} meson, that the very unusual assortment of isoscalar O{sup ++} mesons are due to glueball mixing.

The author describes in this paper the atom-in-jellium calculations he has been doing over the last ten years. He tries to emphasize reasons for doing this sort of calculations and why he devised a model which is different in some respects from others.

Optical interference microscopy plays an important role in the measurement of targets for inertial confinement fusion experiments. We describe how these techniques are applied to the measurement of thickness and refractive index of multilayer films on both flat substrates and microsphere targets. We also discuss procedures for manipulating and examining microsphere targets to measure defects and wall thickness variations anywhere on the target. Finally, we describe the use of optical interferometry to measure the individual components and final assembled structure of double-shell targets. The accuracy of these measurements is from 0.03 to 0.5 ..mu..m, depending on the specific application.

Spherical laser fusion targets can be levitated on beams of Ar or other gas atoms. This is an especially useful and reliable technique for supporting microspheres during plasma coating or plasma etching. The reliability of this technique is principally the result of two things: the success of a special centering device which provides a lateral, stabilizing force on the levitated microspheres; and a gas handling system which is capable of controlling levitation gas flow in the microtorr liter/sec range. We have determined that the operational regime of this device is that of Knudsen's flow. This knowledge of the flow characteristics has been important in developing this device.

Intense, pulsed beams of low-energy positrons have been produced by a high-energy beam from an electron linac. The production efficiency for low-energy positrons has been determined for electrons with 60 to 120 MeV energy, low-energy positron beams from a linac can be of much higher intensity than those beams currently derived from radioactive sources.

Sandia National Laboratories has completed a requirements study for a networked mass storage system. The areas of user functionality, network connectivity, and performance were analyzed to determine specifications for a Network Storage Service to operate in supercomputer environment. 4 refs.

Changes in the structure of (Mo /sub 6/Ru /sub 4/)/sub x/B/sub 1-x/ amorphous alloys were observed in positron annihilation analysis using both positron lifetime and Doppler broadening techniques. The changes were introduced into the alloy either by varying the boron fraction or by neutron irradiation. Similar results were observed both in the irradiated alloys and those with vacant boron sites. The positron annihilation data suggest that the modified structure contains regions of open volume and that the positrons interact with those regions.

The AGS Distributed Control System (AGSDCS) uses a relational database (Interbase) for the storage of all data on the host system network. This includes the static data which describes the components of the accelerator complex, as well as data for application program setup and data records that are used in analysis. By creating a mapping of each elation in the database to a C record and providing general tools for relation (record) across, all the data in the database is available in a natural fashion (in structures) to all the C programs on any of the nodes of the control system. In this paper the correspondence between the Interbase elations and the C structure is detailed with examples of C typedefs and relation definitions. It is also shown how the relations can be put into memory and linked (related) together when fast access is needed by programs. 1 ref., 2 tabs.

This paper mathematically defines protocol translation which is a function employed to interconnect different computer networks. An example of an application is a gateway.

A continuous wave doppler radar system has been designed which is portable, easily deployable and can be remotely controlled. The system is immune to ground clutter and is used for wind speed detection and direction determination. Nearly real time digital signal processing is performed by an Analog Devices ADSP-21020, a 40-bit floating point Digital Signal Processing (DSP) microprocessor. This paper provides an overview of the design of the system including the radio frequency (RF) to digital interface. The various DSP detection algorithms are discussed and compared to system performance and sensitivity. Finally, DSP performance is compared to the performance of an earlier system using Analog Device's ADSP-2100. 6 refs.

First page of an article on the creation of a special residential high school in Oklahoma, wherein Texas is mentioned as a state that has already done so.

Investigations of mass and kinetic-energy distributions from spontaneous fission have been extended in recent years to an isotope of element 104 and, for half-lives, to an isotope of element 108. The results have been surprising in that spontaneous fission half-lives have turned out to be much longer than expected and mass and kinetic- energy distributions were found to abruptly shift away from those of the lighter actinides, showing two modes of fission. These new developments have caused a re-evaluation of our understanding of the fission process, bringing an even deeper appreciation of the role played by nuclear shell effects upon spontaneous fission properties. 16 refs., 10 figs.

A multicomponent dosimeter has been developed that uses an albedo detector to provide the measurement of low energy neutrons and as a screening element. It also contains track detector components, CR-39 and polycarbonate, which are only processed if the TLD indicates there has been an exposure to neutrons. Since the three components have significantly different energy responses, the dosimeter can act as a crude spectrometer. This report describes the dosimeter and briefly summarizes its use experience. 10 refs., 2 figs., 2 tabs.

A set of 16 tissue equivalent torso phantoms has been fabricated for use by major laboratories involved in counting transuranic nuclides in the lung. These phantoms, which have bone equivalent plastic rib cages, duplicate the performance of the DOE Realistic Phantom set. The new phantoms (and their successors) provide the user laboratories with a highly realistic calibration tool. Moreover, use of these phantoms will allow participating laboratories to intercompare calibration information, both on formal and informal bases. 3 refs., 2 figs.

Rate equations for the plasma species in a thermal barrier end plug establish an upper bound on the neutral pressure (P) external to the plasma. For the Tandem Mirror Experiment-Upgrade (TMX-U), this bound is P less than or equal to 0.5 - 1.0 x 10/sup -6/ Torr. Initially TMX-U did not satisfy this criterion, and axial end plugging of plasma losses seemed limited by the excessive pressure. Subsequently, we modified the machine to improve the vacuum conditions, decreasing P to the desired range. At the same time axial end plugging of plasma losses increased to the duration of neutral beam injection and ECRH heating. Here we summarize our experimental measurements of gas input.

A rate dependent theory of polycrystalline plasticity is presented in which the solid is modeled as an isotropic continuum with internal variables. The rate of plastic deformation is shown to be a function of the deviatoric portion of the Cauchy stress tensor as well as two scalar internal variables. The scalar internal variables, which are the dislocation density and mobile fraction, are governed by rate equations which reflect the evolution of microstructural processes. The model has been incorporated into a two dimensional finite element code and several example multidimensional problems are presented which exhibit the rate dependence of the material model.

Annealed molybdenum was irradiated at room temperature by energetic protons or neutrons and the fluence and recoil energy dependence of two traps was measured. Comparison of trapping rates with calculations of damage energy correlates high energy recoils with the short lifetime trap and low energy recoils with the longer lifetime.

Responding to the widespread need for the geotechnical community to discuss instrumentation for nuclear waste repositories, a meeting was held December 2 and 3, 1981, in Denver, Colorado. This report gives the group's consensus recommendations to aid in making decisions for development of instrumentation for future repository work. The main conclusions of the working group meeting were as follows: (1) monitoring of geotechnical parameters in nuclear waste repositories will be necessary to meet licensing requirements; (2) currently available instruments are underdeveloped for this monitoring; (3) research and development to provide adequate instrumentation will need to be performed under federal sponsorship by national laboratories, universities, contractors, and consultants; and (4) a NASA-type reliability program is needed to meet the quality assurance, durability, calibration, and time schedule demands of geotechnical instrumentation development. This will require significant financial commitments from the federal sector.

Separate abstracts were prepared for the papers presented in the subject area: hydrogen sources and detection.

To predict the leak rates of liquid helium and liquid nitrogen containers at operating conditions we need to know how small leaks (10/sup -8/ to 10/sup -5/ atm-cm/sup 3/ air/s), measured at standard conditions, behave when flooded with these cryogens. Two small leaks were measured at ambient conditions (approx.750 Torr and 295 K), at the normal boiling points of LN/sub 2/ and LHe, and at elevated pressures above the liquids. The ratios of the leak rates of the liquids at ambient pressure to the gases (G) at ambient pressure and room temperature were: GN/sub 2/(1), LN/sub 2/(18), GHe(1), and LHe(172). The leak rate ratio of LN/sub 2/ at elevated pressure was linear with pressure. The leak rate ratio of LHe at elevated pressure was also linear with pressure.