The objective of the ''Local Integration of the National Atmospheric Release Advisory Center with Cities'' (LINC) program is to demonstrate the capability for providing local government agencies with an advanced operational atmospheric plume prediction capability, which can be seamlessly integrated with appropriate federal agency support for homeland security applications. LINC is a Domestic Demonstration and Application Program (DDAP) funded by the Chemical and Biological National Security Program (CBNP), which is part of the Department of Energy's (DOE) National Nuclear Security Administration (NNSA). LINC will make use of capabilities that have been developed the CBNP, and integrated into the National Atmospheric Release Advisory Center (NARAC) at Lawrence Livermore National Laboratory (LLNL). NARAC tools services will be provided to pilot study cities and counties to map plumes from terrorism threats. Support to these local agencies will include training and customized support for exercises, special events, and general emergencies. NARAC provides tools and services that map the probable spread of hazardous material which have been accidentally or intentionally released into the atmosphere. Primarily supported by the DOE, NARAC is a national support and resource center for planning, real-time assessment and detailed studies of incidents involving a wide variety of hazards, including radiological, chemical, …

We discuss field activities designed to characterize seepage into an underground opening at the potential site for geologic storage of high-level radioactive waste (HLRW) at Yucca Mountain, Nevada, and the use of these data for development and calibration of a model for predicting seepage into planned HLRW emplacement drifts. Air-injection tests were conducted to characterize the permeability of the fractured rock, and liquid-release tests (LRTs) were conducted and seepage monitored to characterize the seepage-relevant properties of the fractured rock. Both air-injection and liquid-release tests were performed in the same borehole intervals, located above the underground openings. For modeling, three-dimensional, heterogeneous permeability fields were generated, conditioned on the air-permeability data. The initial seepage data collected were used to calibrate the model and test the appropriateness of the modeling approach. A capillary-strength parameter and porosity were the model parameters selected for estimation by data inversion. However, due to the short-term nature of the initial data, the inversion process was unable to independently determine the capillary strength and porosity of the fractured rock. Subsequent seepage data collection focused on longer-term tests, a representative selection of which was used for data inversion. Field observations also played a key role by identifying factors such as …

Conventional cone jet algorithms arose from heuristic considerations of LO hard scattering coupled to independent showering. These algorithms implicitly assume that the final states of individual events can be mapped onto a unique set of jets that are in turn associated with a unique set of underlying hard scattering partons. Thus each final state hadron is assigned to a unique underlying parton. The Jet Energy Flow (JEF) analysis described here does not make such assumptions. The final states of individual events are instead described in terms of flow distributions of hadronic energy. Quantities of physical interest are constructed from the energy flow distribution summed over all events. The resulting analysis is less sensitive to higher order perturbative corrections and the impact of showering and hadronization than the standard cone algorithms.

In this study, we investigated the frictional behavior of both hydrogenated and hydrogen-free diamondlike carbon (DLC) films in high vacuum (10{sup -6} Pa) at room temperature. Water was also introduced into the vacuum chamber to elucidate its effects on DLC film tribology. The hydrogen-free DLC (also referred to as tetrahedral amorphous carbon, or ta-C) was produced by an arc-PVD process, and the highly hydrogenated DLC was produced by plasma-enhanced chemical-vapor deposition. Tribological measurements of these films were made with a pin-on-disc machine with coated steel balls and coated steel discs in matched pairs under a 1 N load. The ball/disk pairs were rotated at sliding speeds in the range of 0.025-0.075 m/s. In vacuum, the steady-state friction coefficient of ta-C was of the order of 0.6 and the wear was severe, whereas for the highly hydrogenated film, friction was below 0.01, and in an optical microscope no wear could be detected. Adding water vapor to the sliding ta-C system in a vacuum chamber caused friction to decrease monotonically from 0.6 to {approx}0.05. In contrast, adding water vapor to the sliding DLC system caused the friction to increase linearly with pressure from 0.01 to 0.07. The results illustrate the importance of …

A current focus of our weapon headspace sampling work is the interpretation of the volatile chemical signatures that we are collecting. To help validate our interpretation we have been developing a laboratory-based material aging capability to simulate material decomposition chemistries identified. Key to establishing this capability has been the development of an automated approach to process, analyze, and quantify arrays of material combinations as a function of time and temperature. Our initial approach involves monitoring the formation and migration of volatile compounds produced when a material decomposes. This approach is advantageous in that it is nondestructive and provides a direct comparison with our weapon headspace surveillance initiative. Nevertheless, this approach requires us to identify volatile material residue and decomposition byproducts that are not typically monitored and reported in material aging studies. Similar to our weapon monitoring method, our principle laboratory-based method involves static headspace collection by solid phase microextraction (SPME) followed by gas chromatography/mass spectrometry (GC/MS). SPME is a sorbent collection technique that is ideally suited for preconcentration and delivery of trace gas-phase compounds for analysis by GC. When combined with MS, detection limits are routinely in the low- and sub-ppb ranges, even for semivolatile and polar compounds. To automate …

A new small-scale Detonation Profile Test (DPT) is being developed to investigate aging effects on the detonation behavior of insensitive high explosives. The experiment involves initiating a small LX-17 cylindrical charge (12.7-19.1 mm diameter x 25.4-33 mm long) and measuring the velocity and curvature of the emerging detonation wave using a streak camera. Results for 12.7 mm diameter unconfined LX-17 charges show detonation velocity in the range between 6.79 and 7.06 km/s for parts up to 33 mm long. Since LX-17 can not sustain detonation at less than 7.3 km/s, these waves were definitely failing. Experiments with confined 12.7 mm diameter and unconfined 19.1 mm diameter samples showed wave velocities in the range of 7.4-7.6 km/s, values approaching steady state conditions at infinite diameter. Experiments with unconfined 19.1 mm diameter specimens are expected to provide reproducible and useful range of detonation parameters suitable for studying aging effects.

Femtosecond laser ablation shows promise in machining energetic materials into desired shapes with minimal thermal and mechanical effects to the remaining material. We will discuss the physical effects associated with machining energetic materials and assemblies containing energetic materials, based on experimental results. Interaction of ultra-short laser pulses with matter will produce high temperature plasma at high-pressure which results in the ablation of material. In the case of energetic material, which includes high explosives, propellants and pyrotechnics, this ablation process must be accomplished without coupling energy into the energetic material. Experiments were conducted in order to characterize and better understand the phenomena of femtosecond laser pulse ablation on a variety of explosives and propellants. Experimental data will be presented for laser fluence thresholds, machining rates, cutting depths and surface quality of the cuts.

One-Dimensional-Time-To-Explosion (ODTX) experiments were conducted to study the thermal decomposition of aged LX-04, aged PBX 9501, HMX class 1 and class 2, Estane and Estane/BDNPA-F (PBX 950 1 plasticized-binder) materials. The tests involved heating 12.7 mm diameter spherical samples in pre-heated aluminum anvils until explosion. The times to explosion at different heating temperatures were compared to historical data on new LX-04 and PBX 9501 compounds to study any changes to their thermal stability. New and aged LX-04 showed comparable decomposition kinetics. The data for aged PBX 9501 showed slightly longer explosion times at equivalent temperatures. Analysis of the error in time measurement is limited and complicated by several experimental factors but the small time change appears to be experimentally significant. The thermal decomposition of these PBXs were modeled using a coupled thermal and heat transport code (chemical TOPAZ) using separate kinetics for HMX and binder decomposition. Separate decomposition models were developed for HMX and the reactive PBX 9501 binder component (1:1 Estane:BDNPA/F) based on the measured explosion times. Thermal aging models can describe longer explosion times by the loss of plasticizer-binder constituent which was more thermally reactive.

Article discussing a resource efficient and scalable approach to routing in large communication networks.

Article on diffusion entropy and waiting time statistics of hard-x-ray solar flares.

This paper presents a case for replacing mercury thermometers with their organic-liquid-filled counterparts. A review of liquid-in glass-thermometers is given. In addition, a brief summary of mercury's health effects and exposure limits is presented. Spill cleanup methods and some lessons learned from our experience are offered as well. Finally, an overview of the mercury thermometer exchange program developed at Lawrence Berkeley National Laboratory is presented.