We report on a new method to make nanostructures, in this case selenium nanowires, in aqueous solution at room temperature. We used the protein cytochrome c{sub 3} to reduce selenate (SeO{sub 4}{sup 2{minus}}) to selenium (Se{sup 0}). Cytochrome c{sub 3} is known for its ability to catalyze reduction of metals including U{sup VI} {yields} U{sup IV}, Cr{sup VI} {yields} Cr{sup III}, Mo{sup VI} {yields} Mo{sup IV}, Cu{sup II} {yields} Cu{sup 0}, Pb{sup II} {yields} Pb{sup 0}, Hg{sup II} {yields} Hg{sup 0}. Nanoparticles of Se{sup 0} precipitated from an aqueous solution at room temperature, followed by spontaneous self-assembling into nanowires. Cytochrome c{sub 3} was extracted from the sulfate-reducing bacteria Desulfovibrio vulgaris (strain Holdenborough) and isolated by the procedure of DerVartanian and Legall.

Proton implantation in GaN is found to reduce the free carrier density through two mechanisms - first, by creating electron and hole traps at around Ec-0.8eV and Ev+0.9eV that lead to compensation in both n- and p-type material, and second, by leading to formation of (AH)O complexes, where A is any acceptor (Mg, Ca, Zn, Be, Cd). The former mechanism is usefid in creating high resistivity regions for device isolation, whereas the latter produces unintentional acceptor passivation that is detrimental to device performance. The strong affinity of hydrogen for acceptors leads to markedly different redistribution behavior for implanted in n- and p-GaN due to the chemical reaction to form neutral complexes in the latter. The acceptors may be reactivated by simple annealing at 2600{degrees}C, or by electron injection at 25-150{degrees}C that produces debonding of the (AH) centers. Implanted hydrogen is also strongly attracted to regions of strain in heterostructure samples during annealing, leading to pile-up at epi-epi and epi-substrate interfaces. II? spectroscopy shows that implanted hydrogen also decorates VG, defects in undoped and n-GaN.

The paper industry has long had a need to better understand and control its papermaking process upstream, specifically at the wet end in the forming section of a paper machine. A vision-based system is under development that addresses this need by automatically measuring and interpreting the pertinent paper web parameters at the wet end in real time. The wet-end characterization of the paper web by a vision system involves a four-dimensional measurement of the slurry in real time. These measurements include the two-dimensional spatial information, the intensity profile, and the depth profile. This paper describes the real-time depth profile measurement system for the high-speed moving slurry. A laser line-based measurement method is used with a high-speed programmable camera to directly measure slurry height. The camera is programmed with a profile algorithm, producing depth data at fast sampling rates. Analysis and experimentation have been conducted to optimize the system for the characteristics of the slurry and laser line image. On-line experimental results are presented.

Layered semicrystalline silico-alumino-titanate (Si-Al-Ti) mixed oxides were synthesized by a modified sol-gel method with hydrothermal synthesis temperatures less than 200 C and autogenic pressure. The solid products are semicrystalline materials with a surface area of 136-367 m{sup 2}/g and a monomodal pore size distribution with an average pore diameter of 3.6-4.7 nrn. The catalytic activity for pyrene hydrogenation in a batch reactor at 300 C and 500 psig was determined for sulfided Ni-Mo supported on the Si-Al-Ti mixed oxide. The activity was a function of the support composition the heat treatment before and after loading the active metals, the addition of organic templates, and different methods of metal loading. The most active sulfided Ni-Mo/Si-Al-Ti catalyst has an activity in the same range as the commercial catalyst, Shell 324, but the metal loading is 37% less than the commercial catalyst.

The design, growth by metal-organic chemical vapor deposition, and processing of an In{sub 0.07}Ga{sub 0.93}As{sub 0.98}N{sub 0.02} solar Al, with 1.0 ev bandgap, lattice matched to GaAs is described. The hole diffusion length in annealed, n-type InGaAsN is 0.6-0.8 pm, and solar cell internal quantum efficiencies > 70% arc obwined. Optical studies indicate that defects or impurities, from InGAsN doping and nitrogen incorporation, limit solar cell performance.

An economic model is a tool for determining the justifiable cost of new sensors and subsystems with respect to value and operation. This process balances the R and D costs against the expense of maintaining current operations and allows for a method to calculate economic indices of performance that can be used as control points in deciding whether to continue development or suspend actions. The model can also be used as an integral part of an overall control loop utilizing real-time process data from the sensor groups to make production decisions (stop production and repair machine, continue and warn of anticipated problems, queue for repairs, etc.). This model has been successfully used and deployed in the CAFE Project. The economic model was one of seven (see Fig. 1) elements critical in developing an investment strategy. It has been successfully used in guiding the R and D activities on the CAFE Project, suspending activities on three new sensor technologies, and continuing development o f two others. The model has also been used to justify the development of a new prognostic approach for diagnosing machine health using COTS equipment and a new algorithmic approach. maintaining current operations and allows for a method …

This paper presents a case study of pressure build-up in some geothermal re-injection wells in Sweden. The geothermal heat plant, in which the re-injection wells are used, has been in operation since the beginning of 1985. Each day since the start of the geothermal plant registration of the injection pressure has been done. The paper describes how a stimulation of the gravel pack outside the well screen can improve the hydraulic performance of the well. The stimulation is done by reversing the flow direction in the well. It is also shown how important it is to have a good well completion in order to receive a positive effect of well stimulation. The paper give example of recordings from two different re-injection wells. The recordings from one of the re-injection wells show that there are serious problems in the well, while the other one shows "normal" hydraulic behavior.

We report on continuing experimental and numerical efforts to obtain steam-water relative permeability functions and to assess effect of heat transfer and phase change. To achieve these, two sets of steady-state flow experiments were conducted: one with nitrogen and water and another with steam and water. During these experiments, a mixture of nitrogen-water (or steam-water) was injected into a Berea sandstone core. At the onset of steady state conditions, three-dimensional saturation distributions were obtained by using a high resolution X-ray computer tomography scanner. By identifying a length of the core over which a flat saturation profile exists and measuring the pressure gradient associated with this length, we calculated relative permeabilities for nitrogen-water flow experiments. The relative permeability relations obtained in this case were in good agreement with those reported by other investigators. Another attempt was also made to conduct a steam-water flow experiment under adiabatic conditions. This experiment was completed with partial success due to the difficulties encountered during the experiment. The results of this experiment showed that a flat saturation profile actually developed over a substantial length of the core even at a comparatively modest injection rate (6 grams per minute) with low steam quality (4% by mass). The …

The Doppler-shift attenuation method was used to measure life-times of superdeformed (SD) states for both the yrast and the first excited superdeformed band of {sup 190}Hg. Intrinsic quadruple moments Q{sub 0} were extracted. For the first time, the dipole transition rates have been extracted for the inter-band transitions which connect the excited SD band to the yrast states in the second minimum. The results support the interpretation of the excited SD band as a rotational band built on an octupole vibration.

This paper describes a calculational procedure using the ABAQUS finite element code that simulates a carburizing and quench heat treat cycle for automotive gears. The procedure features a numerically efficient 2-phase constitutive model to represent transformational plasticity effects for the austenite/martensite transformation together with refined finite element meshes to capture the steep gradients in stress and composition near the gear surfaces. The procedure is illustrated on carburizing and quenching of a thick ring, and comparison of model predictions for distortion, phase distribution, and residual stress with experiment is discussed. Sensitivity of predictions to mesh refinement is studied.

Magnetic field-structured-composites (FSCs) are made by structuring magnetic particle suspensions in uniaxial or biaxial (e.g. rotating) magnetic fields, while polymerizing the suspending resin. A uniaxial field produces chain-like particle structures, and a biaxial field produces sheet-like particle structures. In either case, these anisotropic structures affect the measured magnetic hysteresis loops, with the magnetic remanence and susceptibility increased significantly along the axis of the structuring field, and decreased slightly orthogonal to the structuring field, relative to the unstructured particle composite. The coercivity is essentially unaffected by structuring. We present data for FSCs of magnetically soft particles, and demonstrate that the altered magnetism can be accounted for by considering the large local fields that occur in FSCs. FSCS of magnetically hard particles show unexpectedly large anisotropies in the remanence, and this is due to the local field effects in combination with the large crystalline anisotropy of this material.

Lawrence Livermore National Laboratory is developing a ceramic form for immobilizing excess US plutonium. The process used to produce the ceramic form is similar to the fabrication process used in the production of MOX fuel. In producing the ceramic form, the uranium and plutonium oxides are first milled to less than 20 microns. The milled actinide powder then goes through a mixing-blending step where the ceramic precursors, made from a mixture of calcined TiO₂, Ca(OH)₂, HfO₂ and Gd0₃, are blended with the milled actinides. A subsequent granulation step ensures that the powder will flow freely into the press and die set. The pressed ceramic material is then sintered. The process parameters for the ceramic fabrication steps to make the ceramic form are less demanding than equivalent processing steps for MOX fuel fabrication. As an example, the pressing pressure for MOX is in excess of 137.0 MPa, whereas the pressing pressure for the ceramic form is only 13.8 MPa. This translates into less die wear for the ceramic material pressing. Similarly, the sintering temperatures and times are also different. MOX is sintered at 1,700°C in 4% H₂ for a 24 hour cycle. The ceramic form is sintered at 1350°C in argon …

This report describes the implementation of a coupled mechanical /heat transfer simulation using a Finite Element Interface (FEI). The FE1 is an abstraction layer, which lies between the application code and its linear solver libraries, controlling the set-up and solution of the linear system arising in the finite element simulation. The performance and scalability of the ISIS++ FE1 is examined on the ASCI Red and Blue machines in the context of the ALE3D finite element simulation code.

The understanding of transport processes that occur in naturally fractured geothermal systems is far from being complete. Often, evaluation and numerical simulations of fractured geothermal reservoirs, are carried out by assuming equivalent porous media and homogeneous petrophysical properties within big matrix blocks. The purpose of this paper, is to present a comparison between results obtained from numerical studies of a naturally fractured reservoir treated as a simple porous medium and the simulation of some real aspects of the fractured reservoir. A general conclusion outlines the great practical importance of considering even approximately, the true nature of such systems. Our results show that the homogeneous simplified evaluation of the energy resource in a fractured system, could result in unrealistic estimates of the reservoir capacity to generate electricity.

Differential-algebraic equation (DAE) boundary value problems arise in a variety of applications, including optimal control and parameter estimation for constrained systems. In this paper we survey these applications and explore some of the difficulties associated with solving the resulting DAE systems. For finite difference methods, the need to maintain stability in the differential part of the system often necessitates the use of methods based on symmetric discretizations. However, these methods can suffer from instability and loss of accuracy when applied to certain DAE systems. We describe a new class of methods, Projected Implicit Runge-Kutta Methods, which overcomes these difficulties. We give convergence and stability results, and present numerical experiments which illustrate the effectiveness of the new methods. 20 refs., 1 tab.

The Fiji Department of Energy (DOE) has a comprehensive resource assessment programme which assesses and promotes the use of local renewable energy resources where they are economically viable. DOE is currently involved in the investigation of the extent of geothermal resources for future energy planning and supply purposes. The aim is to determine (a) whether exploitable geothermal fields exist in the Savusavu or Labasa areas. the two geothermal fields with the greatest potential, (b) the cost of exploiting these fields for electricity generation/process heat on Vanua Levu. (c) the comparative cost per mega-watt-hour (MWh) of geothermal electricity generation with other generating options on Vanua Levu, and. (d) to promote the development of the geothermal resource by inviting BOO/BOOT schemes. Results to date have indicated that prospects for using geothermal resource for generating electricity lies in Savusavu only - whereas the Labasa resource can only provide process heat. All geophysical surveys have been completed and the next stage is deep drilling to verify the theoretical findings and subsequent development.

Magnetic semiconductors offer a unique possibility for strongly tuning the intrinsic alloy disorder potential with applied magnetic field. We report the direct observation of a series of step-like reductions in the magnetic alloy disorder potential in single ZnSe/Zn(Cd,Mn)Se quantum wells between O and 60 Tesla. This disorder, measured through the linewidth of low temperature photoluminescence spectra drops abruptly at -19, 36, and 53 Tesla, in concert with observed magnetization steps. Conventional models of alloy disorder (developed for nonmagnetic semiconductors) reproduce the general shape of the data, but markedly underestimate the size of the linewidth reduction.

Microelectromechanical Systems (MEMS) packaging is much different from conventional integrated circuit (IC) packaging. Many MEMS devices must interface to the environment in order to perform their intended function, and the package must be able to facilitate access with the environment while protecting the device. The package must also not interfere with or impede the operation of the MEMS device. The die attachment material should be low stress, and low outgassing, while also minimizing stress relaxation overtime which can lead to scale factor shifts in sensor devices. The fabrication processes used in creating the devices must be compatible with each other, and not result in damage to the devices. Many devices are application specific requiring custom packages that are not commercially available. Devices may also need media compatible packages that can protect the devices from harsh environments in which the MEMS device may operate. Techniques are being developed to handle, process, and package the devices such that high yields of functional packaged parts will result. Currently, many of the processing steps are potentially harmful to MEMS devices and negatively affect yield. It is the objective of this paper to review and discuss packaging challenges that exist for MEMS systems and to …

Effect of aluminum on the decomposition of 5 ferrite to austenite was investigated in a low-alloy steel weld. In addition, the effect of inclusion composition on the transition from bainite to acicular ferrite during austenite decomposition was analyzed. Stress relaxation during decomposition of austenite to allotriomorphic and acicular ferrite was also characterized. Results from the above experiments illustrate the importance of thermomechanical effects on weld microstructure evolution.

Since their invention in the mid-1960's, surface acoustic wave (SAW) devices have become popular for a wide variety of applications. SAW devices represent a low-cost and compact method of achieving a variety of electronic signal processing functions at high frequencies, such as RF filters for TV or mobile wireless communications [1]. SAW devices also provide a convenient platform in chemical sensing applications, achieving extremely high sensitivity to vapor phase analytes in part-per-billion concentrations [2]. Although the SAW acoustic mode can be created on virtually any crystalline substrate, the development of SAW technology has historically focused on the use of piezoelectric materials, such as various orientations of either quartz or lithium niobate, allowing the devices to be fabricated simply and inexpensively. However, the III-V compound semiconductors, and GaAs in particular, are also piezoelectric as a result of their partially covalent bonding and support the SAW acoustic mode, allowing for the convenient fabrication of SAW devices. In addition, GaAs microelectronics has, in the past decade, matured commercially in numerous RF wireless technologies. In fact, GaAs was recognized long ago as a potential candidate for the monolithic integration of SAW devices with microelectronics, to achieve compact RF signal processing functions [3]. The details …

The characterization of laser-produced plasmas has required the application of spectroscopic techniques to non-standard conditions where kinetics models have not been extensively tested. The plasmas are produced by the Nova laser for the study of inertial confinement fusion, can be mm in size, and evolve on sub-nanosecond time scales. These targets typically achieve electron temperatures from 2-4 keV and electron densities of 10{sup 20}-10{sup 22} cm{sup {minus}3}. The authors have measured the electron temperature of two types of targets: bags of gas and hohlraums, Au cylinders with laser entrance holes in the flat ends. By comparing data from different targets, they examine the time-dependence of spectroscopic plasma diagnostics.

A reaction mechanism has been developed that describes the gas-phas 0971 and surface reactions involved in the chemical vapor deposition of Si from chlorosilanes. Good agreement with deposition rate data from a single wafer reactor with no wafer rotation has been attained over a range of gas mixtures, total flow rates, and reactor temperatures.

An internal state variable formulation for phase transforming alloy steels is presented. We have illustrated how local transformation plasticity can be accommodated by an appropriate choice for the corresponding internal stress field acting between the phases. The state variable framework compares well with a numerical micromechanical calculation providing a discrete dependence of microscopic plasticity on volume fraction and the stress dependence attributable to a softer parent phase. The multiphase model is used to simulate the stress state of a quenched bar and show qualitative trends in the response when the transformation phenomenon is incorporated on the length scale of a global boundary value problem.

We developed a model for the probabilistic behavior of a rechargeable battery acting as the energy storage component in a photovoltaic power supply system. Stochastic and deterministic models are created to simulate the behavior of the system component;. The components are the solar resource, the photovoltaic power supply system, the rechargeable battery, and a load. Artificial neural networks are incorporated into the model of the rechargeable battery to simulate damage that occurs during deep discharge cycles. The equations governing system behavior are combined into one set and solved simultaneously in the Monte Carlo framework to evaluate the probabilistic character of measures of battery behavior.