The composition of a thorium metal surface has been monitored using Auger electron spectroscopy following Ar/sup +/ bombardment at different temperatures. After extended Ar/sup +/ bombardment, enough contaminated overlayers were removed to expose a surface region containing only thorium, bulk impurities, and imbedded argon. The main impurities, carbon and oxygen, differed in their behavior when the sample was annealed following bombardment. The amount of surface carbon either increased or remained constant during annealing depending upon the temperature of the sample during bombardment. The amount of surface oxygen decreased rapidly when the sample was heated above 500/sup 0/C regardless of the sample temperature during bombardment. These experiments indicate that preparation of clean, annealed thorium surfaces requires ion bombardment at temperatures > or = 400/sup 0/C.

A high-gain FEL experiment using the 10 kA, 4.5 MeV Experimental Test Accelerator (ETA) is described.

This is the first of two papers in which the low-temperature properties of liquid He{sup 3} are to be calculated in the thermodynamically consistent 'T-matrix' approximation. The set of coupled integral equations which are to be solved is exhibited in Part A of this paper. Part B of this paper is devoted to a preliminary, zero-temperature calculation which employs the additional approximations of using separable potentials and a noninteracting spectral function to define the interaction of two particles in the medium: the <T>{sub 0} approximation. In this approximation they obtain a spectral function for the quasi particles which they expect to display general features in common with those of the actual spectral function. Using this spectral function, they calculate the thermodynamic properties of the system and find that they compare favorably to those obtained in other calculations.

The ninth evaluation of the RIKEN BNL Research Center (RBRC) took place on Nov. 17-18, 2008, at Brookhaven National Laboratory. The members of the Scientific Review Committee (SRC) were Dr. Dr. Wit Busza (Chair), Dr. Miklos Gyulassy, Dr. Akira Masaike, Dr. Richard Milner, Dr. Alfred Mueller, and Dr. Akira Ukawa. We are pleased that Dr. Yasushige Yano, the Director of the Nishina Institute of RIKEN, Japan participated in this meeting both in informing the committee of the activities of the Nishina Institute and the role of RBRC and as an observer of this review. In order to illustrate the breadth and scope of the RBRC program, each member of the Center made a presentation on his/her research efforts. This encompassed three major areas of investigation, theoretical, experimental and computational physics. In addition the committee met privately with the fellows and postdocs to ascertain their opinions and concerns. Although the main purpose of this review is a report to RIKEN Management (Dr. Ryoji Noyori, RIKEN President) on the health, scientific value, management and future prospects of the Center, the RBRC management felt that a compendium of the scientific presentations are of sufficient quality and interest that they warrant a wider distribution. …

Left unprotected, both transmissive and reflective final optics in a laser inertial fusion power plant would quickly fail from melting, pulsed thermal stresses, or degradation of optical properties as a result of ion implantation. One potential option for mitigating this threat is to magnetically deflect the ions such that they are directed into a robust energy dump. In this paper we detail integrated studies that have been carried out to asses the viability of this approach for protecting final optics.

None

None

Over the past three years, Advanced Energy Systems and Brookhaven National Laboratory (BNL) have been collaborating on the design of an Ampere- class superconducting photocathode electron gun. BNL performed the physics design of the overall system and RF cavity under prior programs. Advanced Energy Systems (AES) is currently responsible for the engineering design and fabrication of the electron gun under contract to BNL. We will report on the engineering design and fabrication status of the superconducting photocathode electron gun. The overall configuration of the cryomodule will be reviewed. The layout of the hermitic string, space frame, shielding package, and cold mass will be discussed. The engineering design of the gun cavity and removable cathode will be presented in detail and areas of technical risk will be highlighted. Finally, the fabrication sequence and fabrication status of the gun cavity will be discussed.

The summary of this report is: (1) A high-current SRF cavity for an Energy Recovery Linac (ERL) has been designed by BNL and AES and fabricated by AES; (2) The cavity was cleaned and tested by JLAB with BNL personnel support; (3) Cavity performance exceeded goal of 20 MV/m at Q{sub 0} > 1 x 10{sup 10} and far exceeded requirement of 15 MV/m at Q{sub 0} > 1 x 10{sup 10}; (4) Hermetic String assembled at JLAB with BNL personnel support and shipped to BNL; and (5) BNL has recently completed Cryomodule assembly and unit is ready for installation in the ERL vault.

A straightforward derivation is presented for the covariance matrix of evaluated cross sections based on the covariance matrix of the experimental data and propagation through nuclear model parameters. 10 refs.

The Department of Energy (DOE) has several facilities that either generate and/or store transuranic (TRU)-waste from weapons program research and production. Much of this waste also contains hazardous waste constituents as regulated under Subtitle C of the Resource Conservation and Recovery Act (RCRA). Toxicity characteristic metals in the waste principally include lead, occurring in leaded rubber gloves and shielding. Other RCRA metals may occur as contaminants in pyrochemical salt, soil, debris, and sludge and solidified liquids, as well as in equipment resulting from decontamination and decommissioning activities. Volatile organic compounds (VOCS) contaminate many waste forms as a residue adsorbed on surfaces or occur in sludge and solidified liquids. Due to the presence of these hazardous constituents, applicable disposal regulations include land disposal restrictions established by Hazardous and Solid Waste Amendments (HSWA). The DOE plans to dispose of TRU-mixed waste from the weapons program in the Waste Isolation Pilot Plant (WIPP) by demonstrating no-migration of hazardous constituents. This paper documents the current technical basis for methodologies proposed to develop a post-closure RCRA hazardous constituent source term. For the purposes of demonstrating no-migration, the hazardous constituent source term is defined as the quantities of hazardous constituents that are available for transport after …

The Lawrence Livermore National Laboratory (LLNL) Engineering Directorate is in the third year of a diversity process that has changed the culture of the organization in many ways. This work outlines progress toward realizing the LLNL Engineering Diversity Model. Currently recommendations are being implemented that have been formulated through a problem resolution process, described in this work, in which employees helped identify problems, recommend solutions, and work with managers in focus groups. The process of arriving at the recommendations and the lessons learned through the problem resolution process are discussed. Ongoing actions, short-term goals, and long-term goals of the program are described.

The two-dimensional (R - Z) electromagnetic code FMRZ has been written to model inductive sources self-consistently in time. The code models an argon plasma with momentum-transfer, excitation and ionization as electron-neutral reactions and scattering and charge-exchange for the ion-neutral reactions. The electrons and ions are treated as Maxwellian fluid species and a reduced set of Maxwell`s equations is used to advance the electromagnetic fields. The set of equations used in FMRZ is not subject to typical numerical constraints present in many time dynamic codes allowing one to choose appropriate the and space scales to resolve only the frequencies and scale lengths of interest. The model retains nonlinear driving terms which give rise to a pondermotive force that distorts the density profile. Density and power profiles will be used to illustrate the physical effects of various terms in the equations. Trends in average density and temperature compare well with an analytic model.

Strong evidence for the existence and importance of quadrupole satellite transitions is found in spin-orbit-resolved Xe 4d nondipole photoionization in a combined experimental/theoretical study.

The light emission time response of quenched NElll plastic scintillators has been measured using a streak camera (20 ps resolution) and 100 to 180 ps, 1.06 ..mu..m, laser-produced, pulsed, low energy x-ray excitation. Each light output pulse was obtained by deconvolution from the film data using the x-ray temporal response measured with an x-ray sensitive streak camera (10 ps resolution). Time response parameters are presented for benzophenone and acetophenone, quenching agents which most effectively reduce the decay time of the singlet component. Full width-half-maximums less than or equal to 260 ps were observed for NElll samples quenched with greater than or equal to 2 percent benzophenone. Results are given for unquenched samples consisting of different concentrations of butyl-PBD in PVT and for the phosphor ZnO doped with Ga.

The current status of the determinations of CKM matrix element |V{sub ub}| via exclusive and inclusive charmless semileptonic B decays is reviewed. The large datasets collected at the B-Factories, and the increased precision of theoretical calculations have allowed an improvement in the determination of |V{sub ub}|. However, there are still significant uncertainties. In the exclusive approach, the most precise measurement of the pion channel branching ratio is obtained by an untagged analysis. This very good precision can be reached by tagged analyses with more data. The problem with exclusive decays is that the strong hadron dynamics can not be calculated from first principles and the determination of the form factor has to rely on light-cone sum rules or lattice QCD calculations. The current data samples allow a comparison of different FF models with data distributions. With further developments on lattice calculations, the theoretical error should shrink to reach the experimental one. The inclusive approach still provides the most precise |V{sub ub}| determinations. With new theoretical calculations, the mild (2.5{sigma}) discrepancy with respect to the |V{sub ub}| value determined from the global UT fit has been reduced. As in the exclusive approach, theoretical uncertainties represent the limiting factor to the precision …

Results of recently concluded investigations of infrared laser induced photoionization of very high lying even parity levels in atomic uranium are presented. Behavior of both Rydberg and valence states is described.

The Savannah River Site (SRS) is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River (SRS) near Aiken, South Carolina. Nuclear weapons material production began in the early 1950s, utilizing five production reactors. In the early 1990s all SRS production reactor operations were terminated. The first reactor closure end state declaration was recently institutionalized in a Comprehensive Environmental Response and Compensation and Liability Act (CERCLA) Early Action Record of Decision. The decision for the final closure of the 318,000 square foot 105-P Reactor was determined to be in situ decommissioning (ISD). ISD is an acceptable and cost effective alternative to off-site disposal for the reactor building, which will allow for consolidation of remedial action wastes generated from other cleanup activities within the P Area. ISD is considered protective by the regulators, U. S. Environmental Protection Agency (US EPA) and the South Carolina Department of Health and Environmental Control (SCDHEC), public and stakeholders as waste materials are stabilized/immobilized, and radioactivity is allowed to naturally decay, thus preventing future exposure to the environment. Stakeholder buy-in was critical in the upfront planning in order to achieve this monumental final decision. Numerous public meetings and workshops were held in …

The Large Area Telescope (LAT) on-board the Fermi Gamma-ray Space Telescope began its on-orbit operations on June 23, 2008. Calibrations, defined in a generic sense, correspond to synchronization of trigger signals, optimization of delays for latching data, determination of detector thresholds, gains and responses, evaluation of the perimeter of the South Atlantic Anomaly (SAA), measurements of live time, of absolute time, and internal and spacecraft boresight alignments. Here we describe on-orbit calibration results obtained using known astrophysical sources, galactic cosmic rays, and charge injection into the front-end electronics of each detector. Instrument response functions will be described in a separate publication. This paper demonstrates the stability of calibrations and describes minor changes observed since launch. These results have been used to calibrate the LAT datasets to be publicly released in August 2009.

It has been hoped that high-Z semiconductors would offer efficient ..gamma..-ray detection at or near ambient temperatures with energy resolution significantly better than NaI (Tl) scintillators. For use at X-ray energies, this goal has been achieved with both HgI/sub 2/, CdTe, and GaAs detectors. However, at higher energies (approximately 660 keV) all current detectors have one or more significant deficiencies in terms of attainable volume, charge collection efficiency, and polarization effects. Starting with first principles, all potential compounds which can be formed by the binary combination of elements from the periodic chart were considered as possible detector materials. A rank-ordered listing of the most promising materials for further development is given as well as an assessment of the prospects for future success. 25 references.

We report the discovery of gamma-ray pulsations from the nearby isolated millisecond pulsar PSR J0030+0451 with the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope (formerly GLAST). This discovery makes PSR J0030+0451 the second millisecond pulsar to be detected in gamma-rays after PSR J0218+4232, observed by the EGRET instrument on the Compton Gamma Ray Observatory. The spin-down power {dot E} = 3.5 x 10{sup 33} ergs s{sup -1} is an order of magnitude lower than the empirical lower bound of previously known gamma-ray pulsars. The emission profile is characterized by two narrow peaks, respectively 0.07 {+-} 0.01 and 0.08 {+-} 0.02 wide, separated by 0.44 {+-} 0.02 in phase. The first gamma-ray peak falls 0.15 {+-} 0.01 after the main radio peak. The pulse shape is similar to that of the 'normal' gamma-ray pulsars. An exponentially cut-off power-law fit of the emission spectrum leads to an integral photon flux above 100 MeV of (6.76 {+-} 1.05 {+-} 1.35) x 10{sup -8} cm{sup -2} s{sup -1} with cut-off energy (1.7 {+-} 0.4 {+-} 0.5) GeV. Based on its parallax distance of (300 {+-} 90) pc, we obtain a gamma-ray efficiency L{sub {gamma}}/{dot E} {approx_equal} 15% for the conversion of …

High resolution (less than or equal to .5 cm/sup -1/) autoionization spectra of atomic uranium has been observed from newly identified odd parity levels between 32,660 and 34,165 cm/sup -1/. Photoionization cross sections are presented.

Over 100 new odd parity levels useful for isotope separation of U(I) were observed between 32,660--34,165 cm/sup -1/ using multistep photoionization. A tabulation of typical cross sections and radiative lifetimes for these states is given. The extension of this technique to mapping the spectra of other heavy atoms is discussed. (auth)

We report the fabrication and optical characterization of individual ZnO vertical nanowire laser cavities. Dilute nanowire arrays with interwire spacing>10 ?m were produced by a modified chemical vapor transport (CVT) method yielding an ideal platform for single nanowire imaging and spectroscopy. Lasing characteristics of a single vertical nanowire are presented, as well as high-resolution photoluminescence imaging by UV-laser scanning confocal microscopy. In addition, three-dimensional (3D) mapping of the photoluminescence emission performed in both planar and vertical dimensions demonstrates height-selective imaging useful for vertical nanowires and heteronanostructures emerging in the field of optoelectronics and nanophotonics.