Various schemes for obtaining anti pp interactions are outlined, and the luminosities obtainable for each case calculated. In the simplest realistic case, a luminosity of 1.3 x 10/sup 29/ is obtained with a 13 hour filling time. The addition of special rf systems in both the AGS and ISABELLE give a scheme with luminosity 8 x 10/sup 29/ in 6 hours. The use of stochastic cooling to stack raises the luminosity to as high as 10/sup 31/ but the filling time is then 68 hours. Finally a scheme is considered that uses a special 30 GeV capture ring. With this, a luminosity of 10/sup 31/ could be achieved after 20 hours, or higher if a larger filling time were acceptable. Further gains could be made if a smaller proton spot on the target is used but a simple calculation suggests that even the spot size assumed may explode the target too fast.

A computer program, SCAP-BR, has been developed at Burns and Roe for the gamma-ray streaming analysis through multi-legged ducts. SCAP-BR is a modified version of the single scattering code, SCAP, incorporating capabilities of handling multiple scattering and volumetric source geometries. It utilizes the point kernel integration method to calculate both the line-of-sight and scattered gamma dose rates by employing the ray tracing technique through complex shield geometries. The multiple scattering is handled by a repeated process of the single scatter method through each successive scatter region and collapsed pseudo source meshes constructed on the relative coordinate systems. The SCAP-BR results have been compared with experimental data for a Z-type (three-legged) concrete duct with a Co-60 source placed at the duct entrance point. The SCAP-BR dose rate predictions along the duct axis demonstrate an excellent agreement with the measured values.

I review some recent theoretical issues relevant to the physics of hadron-hadron collisions. I discuss processes where either energy or luminosity is the most important feature and emphasize the need for experiments at luminosities of 10{sup 33}cm{sup -2}sec{sup 1} if the full range of physics options is to be thoroughly explored. 22 refs., 10 figs.

An overview of the continuum regularization program is given. The program is traced from its roots in stochastic quantization, with emphasis on the examples of regularized gauge theory, the regularized general nonlinear sigma model and regularized quantum gravity. In its coordinate-invariant form, the regularization is seen as entirely geometric: only the supermetric on field deformations is regularized, and the prescription provides universal nonperturbative invariant continuum regularization across all quantum field theory. 54 refs.

A Reticon 50 x 50 photodiode array camera has been placed on Livermore's Tandem Mirror Experiment to view a 56-cm diameter plasma source of visible, vacuum-ultraviolet, and x-ray photons. The compact camera views the source through a pinhole, filters, a fiber optic coupler, a microchannel plate intensifier (MCPI), and a reducer. The images are digitized (at 3.3 MHz) and stored in a large, high-speed memory that has a capacity of 45 images. A local LSI-11 microprocessor provides immediate processing and display of the data. The data are also stored on floppy disks that can be further processed on the large Livermore Computer System. The temporal resolution is limited by the fastest MCPI gate. The number of images recorded is determined by the read-out time of the Reticon camera (minimum 0.9 msec). The spatial resolution of approximately 1.4 cm is fixed by the geometry and the pinhole of 0.025 cm. Typical high-quality color representation of some plasma images are included.

A study of the neutron optical potential on nuclei near mass-140 was begun to extend the energy range and improve the precision of previous neutron total cross section measurements. The extended energy range of this measurement reveals maxima and minima in the total cross section that are evidence of the nuclear Ramsauer effect. A 100-MeV linear accelerator is used to produce a continuum of neutron energies from a Ta-Be conversion target. A 250-meter flight path is used to measure neutron energies by the time-of-flight method. Transmission data for /sup 140/Ce and transmission ratios for /sup 142/Ce, /sup 141/Pr, and /sup 139/La relative to /sup 140/Ce were obtained. The /sup 140/Ce data have a precision of 1 to 3% and the ratios are obtained with a precision of about 0.3%. To analyze these total cross section data a computer code was developed to calculate the total elastic, reaction, and differential elastic scattering cross sections for a neutron interacting with a nucleus. The interaction is represented by a spherically symmetric complex potential that includes spin-orbit coupling. The parameters of this potential were adjusted to approximate the /sup 140/Ce total cross over the energy range from 2.5 to 60 MeV. The energy dependence …

We consider backgrounds to the detection of the two-body hadronic decay modes of neutral B mesons and baryons. The largest background is due to the correlated production of pairs of high-p/sub T/ hadrons in the target, but this can be adequately rejected provided the experimental apparatus has sufficient resolution in mass and decay vertex. Another possible source of background arises from the production and decay of charmed and strange particles. Since these particles can travel considerable distances before decaying, they can give rise to backgrounds which may not be rejectable by means of vertex cut. We have simulated several backgrounds from charm, and we find them to be small compared to the expected level of signal. 8 refs., 1 fig., 2 tabs

Computer modeling of antennas, since its start in the late 1960's, has become a powerful and widely used tool for antenna design. Computer codes have been developed based on the Method-of-Moments, Geometrical Theory of Diffraction, or integration of Maxwell's equations. Of such tools, the Numerical Electromagnetics Code-Method of Moments (NEC) has become one of the most widely used codes for modeling resonant sized antennas. There are several reasons for this including the systematic updating and extension of its capabilities, extensive user-oriented documentation and accessibility of its developers for user assistance. The result is that there are estimated to be several hundred users of various versions of NEC world wide. 23 refs., 10 figs.

A gap between a neutron sonde and the wall of a borehole can have a significant effect on the observed count rate. This effect was determined experimentally to be linear with gaps as large as 2.5 cm. The count rate is given by N/sub N/ = K/sub 0/ + K/sub 1/g where K/sub 0/ is the count rate that would be observed at zero gap, and g is the gap. The parameters K/sub 0/ and K/sub 1/ are dependent on both water (ie. hydrogen) content and bulk density. In many situations failure to correct the count rate for this gap effect can result in a significant degradation in the accuracy of the water content calculated from the count rate. In a dry borehole, K/sub 1/ is small at zero formation water content, and increases with formation water content. In a water-filled borehole, K/sub 1/ is large at zero formation water content, and tends to decrease with increasing formation water content, becoming zero, as of course it must, if the formation is pure water. The absolute value of K/sub 1/ increases with increasing density. A representation was determined for K/sub 0/ and K/sub 1/ from experimental data. This representation can be …

Recent data on low-mass X-ray binaries (LMXBs) and millisecond pulsars (MSPs) pose a challenge to evolutionary theories which neglect the effects of disk and comparison irradiation. Here we discuss the main features of a radiation-driven (RD) evolutionary model that may be applicable to several LMXBs. According to this model, radiation from the accreting compact star in LMXBs vaporizes'' the accretion disk and the companion star by driving a self-sustained mass loss until a sudden accretion-turn off occurs. The main characteristics of the RD-evolution are: (1) lifetime of RD-LMXB's is of order 10{sup 7} years or less; (2) both the orbital period gap and the X-ray luminosity may be consequences of RD-evolution of LMXB's containing lower main sequence and degeneration companion stars; (3) the companion star may transfer mass to the primary even if it underfills its Roche lobe; (4) a class of recycled MSPs can continue to vaporize the low-mass companions by a strong pulsar wind even after the accretion turn-off; (5) the RD-evolutionary model resolves the apparent statistical descrepancy between the number of MSPs and their LMXB progenitors in the Galaxy. We discuss the implications of the discovery of single MSPs in low-density globular clusters and the recent measurements …

This article is a response to an article by M. Adell et al. [Phy. Rev. Lett. 94, 139701 (2005)] about semiconductor-based spintronics research.

Article on the functional analysis of metabolic channeling and regulation in lignin biosynthesis.

Accidents in which large quantities of liquefied natural gas (LNG) or other combustible materials are spilled can potentially lead to disastrous consequences, especially if the dispersing combustible cloud finds a suitable ignition source. So far, very little is known about the detailed behavior of a large burning cloud. Full-scale experiments are economically prohibitive, and therefore one must rely on laboratory and field experiments of smaller size, scaling up the results to make predictions about larger spill accidents. In this paper we describe our laboratory-scale experiments with a combustible propane/air mixture in various partially confined geometries. We summarize the experimental results and compare them with calculated results based on numerical simulations of the experiments. Our observations suggest that the geometry of the partial confinement is of primary importance; turbulence-producing obstacles can cause acceleration in the flame front and, more important, can cause a faster burnout of the combustible vapor.

In processing radioactive material there are certain steps which have customarily required operators working at glove box enclosures. This can subject the operators to low level radiation dosages and the risk of accidental contamination, as well as generate significant radioactive waste to accommodate the human interaction. An automated system is being developed to replace the operator at the glove box and thus remove the human from these risks, and minimize waste. Although most of the processing can be automated with very little human operator interaction, there are some tasks where intelligent intervention is necessary to adapt to unexpected circumstances and events. These activities will require that the operator be able to interact with the process using a remote manipulator in a manner as natural as if the operator were actually in the work cell. This robot-based remote manipulation system, or telerobot, must provide the operator with an effective means of controlling the robot arm, gripper and tools. This paper describes the effort in progress in Lawrence Livermore National Laboratory to achieve this capability. 8 refs.

A method was developed for economically fabricating short, wire-wound, steering magnets with maximum length, cosine-distributed, axial elements. This method utilizes multifunctional tooling to precisely flat-wind two-layer dipole halves that are subsequently reformed and encapsulated into semicylindrical form with confinement of the end turns into thin, half discs normal to the magnet axis. This paper addresses the magnet fabrication in detail, highlighting the inherent quality control features of the tooling, overall construction costs, and contemplated manufacturing enhancements.

The Mirror Advanced Reactor Study (MARS) has resulted in an overview of a first-generation tandem mirror reactor. The central cell fusion plasma is self-sustained by alpha heating (ignition), while electron-cyclotron resonance heating and negative ion beams maintain the electrostatic confining potentials in the end plugs. Plug injection power is reduced by the use of high-field choke coils and thermal barriers, concepts to be tested in the Tandem Mirror Experiment-Upgrade (TMX-U) and Mirror Fusion Test Facility (MFTF-B) at Lawrence Livermore National Laboratory.

We have developed an in-situ electromagnetic velocity (EMV) gauge system for use in multiple-gauge studies of initiating and detonating explosives. We have also investigated the risetime of the gauge and the manner in which it perturbs a reactive flow. We report on the special precautions that are necessary in multiple gauge experiments to reduce lead spreading, simplify target fabrication problems and minimize cross talk through the conducting explosive. Agreement between measured stress records and calculations from multiple velocity gauge data give us confidence that our velocity gauges are recording properly. We have used laser velocity interferometry to measure the gauge risetime in polymethyl methacrylate (PMMA). To resolve the difference in the two methods, we have examined hydrodynamic and material rate effects. In addition, we considered the effects of shock tilt, electronic response and magntic diffusion on the gauge's response time.

Superconducting magnet systems under construction and projected for the future contain magnets that are magnetically coupled and electrically connected with shared power supplies. A change in one power supply voltage affects all of the magnet currents. A current controller for these system must be designed as a multivariable system. The power describes a method, based on decoupling control, for the rational design of these systems. Dynamic decoupling is achieved by cross-feedback of the measured currents. A network of gains at the input decouples the system statically and eliminates the steady-state error. Errors are then due to component variations. The method has been applied to the magnet system of the MFTF-B, at the Lawrence Livermore National Laboratory.

Conversion electrons from the decay of low-lying levels of /sup 237/Np have been measured to detect the population of these levels by gamma-ray decay of the /sup 237/Np shape isomer. Analysis of the 208-keV transition L conversion-electron peak gives an upper limit of about 17 ..mu..b for the population of the 3/2/sup -/ 267-keV level in /sup 237/Np from the shape isomer decay. Model calculations are compared with the measured limit. Improvements are suggested for this experiment. 9 refs., 4 figs.

Article on the loss of rare fish species from tropical floodplain food webs and how this affects community structure and ecosystem multifunctionality in a mesocosm experiment.

Article accompanying a poster presentation for the 2013 Computational Neuroscience Annual Meeting. This article discusses the decoding of movement direction using optical imaging of motor cortex.

Hydrologic analyses are commonly based on a single conceptual-mathematical model. Yet hydrologic environments are open and complex, rendering them prone to multiple interpretations and mathematical descriptions. Considering conceptual model uncertainty is a critical process in hydrologic uncertainty assessment. This study assesses recharge and geologic model uncertainty for the Climax mine area of the Nevada Test Site, Nevada. Five alternative recharge models have been independently developed for Nevada and the Death Valley area of California. These models are (1) the Maxey-Eakin model, (2 and 3) a distributed parameter watershed model with and without a runon-runoff component, and (4 and 5) a chloride mass-balance model with two zero-recharge masks, one for alluvium and one for both alluvium and elevation. Similarly, five geological models have been developed based on different interpretations of available geologic information. One of them was developed by the U.S. Geological Survey for the Death Valley Regional Flow System (DVRFS) model; the other four were developed by Bechtel Nevada for the Yucca Flat Corrective Action Unit (CAU). The Climax mine area is in the northern part of the Yucca Flat CAU, which is within the DVRFS. A total of 25 conceptual models are thus formulated based on the five recharge …

Experiments planned to address the issue of electron correlation in the Pu 5f states are described herein. The key is the utilization of the Fano Effect, the observation of spin polarization in nonmagnetic systems, using chiral excitation such as circularly polarized X-rays.

None